Skip Nav Destination
Issues
November 2018
ISSN 0742-4787
EISSN 1528-8897
Research Papers
Coatings and Solid Lubricants
Tribological Properties of Nitrile Rubber/UHMWPE/Nano-MoS2 Water-Lubricated Bearing Material Under Low Speed and Heavy Duty
J. Tribol. November 2018, 140(6): 061301.
doi: https://doi.org/10.1115/1.4039930
Topics:
Friction
,
Nitrile rubber
,
Rubber
,
Tribology
,
Water
,
Wear
,
Particulate matter
,
Bearings
,
Lubrication
,
Composite materials
Contact Mechanics
Evaluation of Rolling Contact Fatigue of a Carburized Wind Turbine Gear Considering the Residual Stress and Hardness Gradient
J. Tribol. November 2018, 140(6): 061401.
doi: https://doi.org/10.1115/1.4040052
Effect of Residual Stresses on Microstructural Evolution Due to Rolling Contact Fatigue
J. Tribol. November 2018, 140(6): 061402.
doi: https://doi.org/10.1115/1.4040051
Topics:
Fatigue
,
Residual stresses
,
Rolling contact
,
Steel
,
Stress
,
Simulation
,
Finite element analysis
,
Modeling
,
Phase transitions
An Analytical Dynamic Model of a Hollow Cylindrical Roller Bearing
J. Tribol. November 2018, 140(6): 061403.
doi: https://doi.org/10.1115/1.4040382
Topics:
Rollers
,
Vibration
,
Deformation
,
Stress
Finite Element Analysis Simulation of the Effect of Induction Hardening on Rolling Contact Fatigue
J. Tribol. November 2018, 140(6): 061404.
doi: https://doi.org/10.1115/1.4040305
Topics:
Electromagnetic induction
,
Fatigue
,
Hardening
,
Nucleation (Physics)
,
Shear stress
,
Stress
,
Rolling contact
,
Hydrostatics
,
Finite element analysis
,
Simulation
Elastohydrodynamic Lubrication
Numerical Prediction of Surface Wear and Roughness Parameters During Running-In for Line Contacts Under Mixed Lubrication
J. Tribol. November 2018, 140(6): 061501.
doi: https://doi.org/10.1115/1.4039867
Topics:
Lubrication
,
Surface roughness
,
Wear
,
Density
,
Probability
Friction and Wear
Assessment of Cavitation Erosion of Gas-Nitrided Cr-Ni-Mo Steels
J. Tribol. November 2018, 140(6): 061601.
doi: https://doi.org/10.1115/1.4039133
Topics:
Cavitation erosion
,
Nitriding
,
Steel
,
Erosion
Experimental Studies and Comparison of Centrifugally Cast Cu/SiC and Cu/Si3N4 Functionally Graded Composites on Mechanical and Wear Behavior
J. Tribol. November 2018, 140(6): 061602.
doi: https://doi.org/10.1115/1.4040160
Topics:
Composite materials
,
Wear
,
Stress
,
Particulate matter
,
Adhesives
On Development and Dry Sliding Wear Behavior of Microwave Processed Ni/Al2O3 Composite Clad
J. Tribol. November 2018, 140(6): 061603.
doi: https://doi.org/10.1115/1.4039996
Effect of Water on the Interfacial Contact and Tribological Properties of Hoist Linings
J. Tribol. November 2018, 140(6): 061604.
doi: https://doi.org/10.1115/1.4040071
Topics:
Friction
,
Linings (Textiles)
,
Water
Tribological Behavior of Polymer Seal Materials in Water-Based Hydraulic Fluids
J. Tribol. November 2018, 140(6): 061605.
doi: https://doi.org/10.1115/1.4040078
Tribological Properties of Three-Dimensionally Printed Ti–6Al–4V Material Via Electron Beam Melting Process Tested Against 100Cr6 Steel Without and With Hank's Solution
J. Tribol. November 2018, 140(6): 061606.
doi: https://doi.org/10.1115/1.4040158
Topics:
Additive manufacturing
,
Cathode ray oscilloscopes
,
Electron beams
,
Melting
,
Steel
,
Tribology
,
Wear
,
Friction
Synergetic Effect of Cryorolling and Postroll Aging on Simultaneous Increase in Wear Resistance and Mechanical Properties of an Al–Cu Alloy
J. Tribol. November 2018, 140(6): 061607.
doi: https://doi.org/10.1115/1.4040162
Topics:
Copper alloys
,
Dislocation density
,
Dislocations
,
Mechanical properties
,
Wear
,
Wear resistance
,
Aluminum
,
Ductility
,
Temperature
,
Alloys
Effect of Niobium on the Dry Sliding Friction and Wear Properties of 100Cr6 Bearing Steel
J. Tribol. November 2018, 140(6): 061608.
doi: https://doi.org/10.1115/1.4040304
Topics:
Bearing steel
,
Friction
,
Wear
,
Sliding friction
Study of Erosion–Corrosion and Corrosion Behavior of Commercially Pure-Ti During Slurry Erosion
J. Tribol. November 2018, 140(6): 061609.
doi: https://doi.org/10.1115/1.4040156
Effect of Mn Modification on the Tribological Properties of In Situ Al-15Mg2Si Composites Containing Fe as an Impurity
J. Tribol. November 2018, 140(6): 061610.
doi: https://doi.org/10.1115/1.4040384
Topics:
Composite materials
,
Friction
,
Particulate matter
,
Wear
,
Tribology
,
Intermetallic compounds
Hydrodynamic Lubrication
Research on the Profile Design of Surface Texture in Piston Ring of Internal Combustion Engine
J. Tribol. November 2018, 140(6): 061701.
doi: https://doi.org/10.1115/1.4039957
Topics:
Cylinders
,
Film thickness
,
Friction
,
Lubrication
,
Piston rings
,
Pressure
,
Texture (Materials)
,
Surface texture
,
Design
A Design of Coverage Area for Textured Surface of Sliding Journal Bearing Based on Genetic Algorithm
J. Tribol. November 2018, 140(6): 061702.
doi: https://doi.org/10.1115/1.4039958
Topics:
Bearings
,
Design
,
Friction
,
Genetic algorithms
,
Journal bearings
,
Texture (Materials)
,
Stress
,
Shapes
,
Pressure
,
Computer simulation
Dynamic Force Coefficients of Hydrostatic Gas Films for Recessed Flat Plates: Experimental Identification and Numerical Predictions
J. Tribol. November 2018, 140(6): 061703.
doi: https://doi.org/10.1115/1.4040114
Topics:
Damping
,
Excitation
,
Film thickness
,
Flat plates
,
Flow (Dynamics)
,
Hydrostatics
,
Pressure
,
Stiffness
,
Bearings
,
Leakage
Tribological Performance of Textured Surfaces Created by Modulation-Assisted Machining
J. Tribol. November 2018, 140(6): 061704.
doi: https://doi.org/10.1115/1.4040149
Topics:
Machining
,
Tribology
,
Wear
,
Brass (Metal)
Effects of Pressure Boundary on Dynamic Torque Behavior of Hydroviscous Drive
J. Tribol. November 2018, 140(6): 061705.
doi: https://doi.org/10.1115/1.4040376
Topics:
Boundary-value problems
,
Disks
,
Pressure
,
Torque
The Influence of Surface Patterning on the Thermal Properties of Textured Thrust Bearings
J. Tribol. November 2018, 140(6): 061706.
doi: https://doi.org/10.1115/1.4040383
Topics:
Bearings
,
Computational fluid dynamics
,
Design
,
Stress
,
Temperature
,
Texture (Materials)
,
Thermal properties
,
Thrust bearings
,
Optimization
,
Friction
Acoustic Journal Bearing With Changeable Geometry and Built-in Flexibility
J. Tribol. November 2018, 140(6): 061707.
doi: https://doi.org/10.1115/1.4040416
Topics:
Acoustics
,
Bearings
,
Geometry
,
Journal bearings
Lubricants
The Application of Polyvinylpyrrolidone as a Modifier of Tribological Properties of Lubricating Greases Based on Linseed Oil
J. Tribol. November 2018, 140(6): 061801.
doi: https://doi.org/10.1115/1.4040054
Other (Seals, Manufacturing)
Technical Brief
Strengthening Effect of Soft Thin Coatings
J. Tribol. November 2018, 140(6): 064501.
doi: https://doi.org/10.1115/1.4040115
Topics:
Coatings
,
Stress
,
Plasticity
Numerical Analysis of the Contact Pressure in a Quasi-Static Elastomeric Reciprocating Sealing System
J. Tribol. November 2018, 140(6): 064502.
doi: https://doi.org/10.1115/1.4040154
Topics:
Friction
,
Pistons
,
Pressure
,
Sealing (Process)
,
Braking
,
Computer simulation
,
Fluids
,
Design
Discussion
Closure
Closure to “Discussion of ‘Nodal Unsteady Inverse Elastohydrodynamic Lubrication: Axisymmetric Normal Approach’” (Booker, J. F., and Boedo, S., 2018, ASME J. Tribol., 140(4), p. 041501)
J. Tribol. November 2018, 140(6): 066001.
doi: https://doi.org/10.1115/1.4040014
Topics:
Elastohydrodynamic lubrication
Email alerts
RSS Feeds
Fretting Wear Behavior of LPBF Ti-6Al-4V Alloy: Influence of Annealing and Anodizing
J. Tribol (October 2025)
Influence of Wear on the Performance Parameters of the Rigid Bore Aerodynamic Journal Bearing
J. Tribol (October 2025)
Proposed Surface Topography for Frosting Inhibition and Ease Ice Removal
J. Tribol (October 2025)