Volume 129 Issue 1 | J. Tribol. | ASME Digital Collection

Technical Papers

Wear and Surface Characterization of Boronized Pure Iron

Pranay Asthana, Hong Liang, Metin Usta, A. H. Ucisik

J. Tribol. January 2007, 129(1): 1–10. doi: https://doi.org/10.1115/1.2401211

View articletitled, Wear and Surface Characterization of Boronized Pure Iron

Topics: Friction , Iron , Wear , Diffusion (Physics) , Temperature , Tribology , Surface characterization , Wear resistance

In Situ Investigation of Nanoabrasive Wear of Silicon

S. Ingole, A. Schwartzman, H. Liang

J. Tribol. January 2007, 129(1): 11–16. doi: https://doi.org/10.1115/1.2372764

Abstract

View articletitled, In Situ Investigation of Nanoabrasive Wear of Silicon

Open the PDF for in another window

Topics: Deformation , Nanoindentation , Silicon , Stress , Wear , Displacement , Atomic force microscopy , Phase transitions , Surface characterization

State and Rate Dependent Friction Laws for Modeling High-Speed Frictional Slip at Metal-on-Metal Interfaces

Hamid Ullah, M. A. Irfan, V. Prakash

J. Tribol. January 2007, 129(1): 17–22. doi: https://doi.org/10.1115/1.2401217

Abstract

View articletitled, State and Rate Dependent Friction Laws for Modeling High-Speed Frictional Slip at Metal-on-Metal Interfaces

Open the PDF for in another window

Topics: Friction , Pressure , Modeling , Shear (Mechanics) , Steady state , Shear stress

A Fracture Mechanics Approach to the Prediction of Tool Wear in Dry High-Speed Machining of Aluminum Cast Alloys—Part 1: Model Development

Alexander Bardetsky, Helmi Attia, Mohamed Elbestawi

J. Tribol. January 2007, 129(1): 23–30. doi: https://doi.org/10.1115/1.2390718

Abstract

View articletitled, A Fracture Mechanics Approach to the Prediction of Tool Wear in Dry High-Speed Machining of Aluminum Cast Alloys—Part 1: Model Development

Open the PDF for in another window

Topics: Cutting tools , Wear , Modeling , Fracture (Materials) , Machining , Silicon alloys , Carbide cutting tools , Crack propagation , Alloys , Particulate matter

A Fracture Mechanics Approach to the Prediction of Tool Wear in Dry High Speed Machining of Aluminum Cast Alloys—Part 2: Model Calibration and Verification

Alexander Bardetsky, Helmi Attia, Mohamed Elbestawi

J. Tribol. January 2007, 129(1): 31–39. doi: https://doi.org/10.1115/1.2390719

Abstract

View articletitled, A Fracture Mechanics Approach to the Prediction of Tool Wear in Dry High Speed Machining of Aluminum Cast Alloys—Part 2: Model Calibration and Verification

Open the PDF for in another window

Topics: Calibration , Cutting , Cutting tools , Wear , Milling , Silicon alloys

Three-Dimensional Sliding Contact Analysis of Multilayered Solids With Rough Surfaces

Shaobiao Cai, Bharat Bhushan

J. Tribol. January 2007, 129(1): 40–59. doi: https://doi.org/10.1115/1.2401221

Abstract

View articletitled, Three-Dimensional Sliding Contact Analysis of Multilayered Solids With Rough Surfaces

Open the PDF for in another window

Topics: Friction , Pressure , Solids , Stress , Surface roughness , Wear , Traction

Partial Plane Contact of an Elastic Curved Beam Pressed by a Flat Surface

Joseph M. Block, Leon M. Keer

J. Tribol. January 2007, 129(1): 60–64. doi: https://doi.org/10.1115/1.2401212

Abstract

View articletitled, Partial Plane Contact of an Elastic Curved Beam Pressed by a Flat Surface

Open the PDF for in another window

Topics: Boundary-value problems , Elasticity , Euler-Bernoulli beam theory , Stress , Fourier series

Improved Analysis of Unstable Bouncing Vibration and Stabilizing Design of Flying Head Slider in Near-Contact Region

Kyosuke Ono, Masami Yamane

J. Tribol. January 2007, 129(1): 65–74. doi: https://doi.org/10.1115/1.2401214

Abstract

View articletitled, Improved Analysis of Unstable Bouncing Vibration and Stabilizing Design of Flying Head Slider in Near-Contact Region

Open the PDF for in another window

Topics: Adhesion , Air bearings , Deformation , Design , Disks , Stiffness , Vibration , Separation (Technology) , Density , Surface roughness

Static and Dynamic Characterization of a Bump-Type Foil Bearing Structure

Sébastien Le Lez, Mihai Arghir, Jean Frene

J. Tribol. January 2007, 129(1): 75–83. doi: https://doi.org/10.1115/1.2390717

Abstract

View articletitled, Static and Dynamic Characterization of a Bump-Type Foil Bearing Structure

Open the PDF for in another window

Topics: Damping , Excitation , Finite element analysis , Foil bearings , Friction , Stiffness , Stress , Energy dissipation , Strips , Stick-slip

An Experimental Investigation of Grease-Lubricated Journal Bearings

Xiaobin Lu, M. M. Khonsari

J. Tribol. January 2007, 129(1): 84–90. doi: https://doi.org/10.1115/1.2401216

Abstract

View articletitled, An Experimental Investigation of Grease-Lubricated Journal Bearings

Open the PDF for in another window

Topics: Bearings , Bushings , Friction , Journal bearings , Lubrication , Stress

Numerical Model of a Reciprocating Hydraulic Rod Seal

Richard F. Salant, Nicholas Maser, Bo Yang

J. Tribol. January 2007, 129(1): 91–97. doi: https://doi.org/10.1115/1.2401222

Abstract

View articletitled, Numerical Model of a Reciprocating Hydraulic Rod Seal

Open the PDF for in another window

Topics: Computer simulation , Deformation , Film thickness , Finite element analysis , Flow (Dynamics) , Fluid mechanics , Friction , Leakage , Lubrication , Pressure

Experimental Investigation of the Influence of Supply Temperature and Supply Pressure on the Performance of a Two-Axial Groove Hydrodynamic Journal Bearing

F. P. Brito, A. S. Miranda, J. Bouyer, M. Fillon

J. Tribol. January 2007, 129(1): 98–105. doi: https://doi.org/10.1115/1.2401206

Abstract

View articletitled, Experimental Investigation of the Influence of Supply Temperature and Supply Pressure on the Performance of a Two-Axial Groove Hydrodynamic Journal Bearing

Open the PDF for in another window

Topics: Bearings , Knudsen number , Pressure , Stress , Temperature , Flow (Dynamics) , Journal bearings

Stability-Optimized Clearance Configuration of Fluid-Film Bearings

Koichi Matsuda, Shinya Kijimoto, Yoichi Kanemitsu

J. Tribol. January 2007, 129(1): 106–111. doi: https://doi.org/10.1115/1.2401213

Abstract

View articletitled, Stability-Optimized Clearance Configuration of Fluid-Film Bearings

Open the PDF for in another window

Topics: Bearings , Clearances (Engineering) , Fluid films , Optimization , Stability , Journal bearings , Fourier series , Whirls , Rotors

Design of Flexure Pivot Tilting Pads Gas Bearings for High-speed Oil-Free Microturbomachinery

Kyuho Sim, Daejong Kim

J. Tribol. January 2007, 129(1): 112–119. doi: https://doi.org/10.1115/1.2372763

Abstract

View articletitled, Design of Flexure Pivot Tilting Pads Gas Bearings for High-speed Oil-Free Microturbomachinery

Open the PDF for in another window

Topics: Bearings , Clearances (Engineering) , Design , Gas bearings , Rotors , Stiffness , Simulation , Bending (Stress) , Shorelines

Computational Fluid Dynamics Analysis of Turbulent Flow Within a Mechanical Seal Chamber

Zhaogao Luan, M. M. Khonsari

J. Tribol. January 2007, 129(1): 120–128. doi: https://doi.org/10.1115/1.2401220

Abstract

View articletitled, Computational Fluid Dynamics Analysis of Turbulent Flow Within a Mechanical Seal Chamber

Open the PDF for in another window

Topics: Flow (Dynamics) , Turbulence , Computational fluid dynamics

Experimental and Numerical Investigation of a Gas Compressor Windback Seal

Adnan Al-Ghasem, Ph.D. Candidate, G. L. Morrison, John P. Platt, Jr.

J. Tribol. January 2007, 129(1): 129–134. doi: https://doi.org/10.1115/1.2401205

Abstract

View articletitled, Experimental and Numerical Investigation of a Gas Compressor Windback Seal

Open the PDF for in another window

Topics: Bearings , Cavities , Computational fluid dynamics , Contamination , Design , Flow (Dynamics) , Gas compressors , Leakage , Pressure , Sealants

Development of a Novel Metalworking Fluid Engineered for Use With Microfiltration Recycling

J. E. Wentz, S. G. Kapoor, R. E. DeVor, N. Rajagopalan

J. Tribol. January 2007, 129(1): 135–142. doi: https://doi.org/10.1115/1.2401207

Abstract

View articletitled, Development of a Novel Metalworking Fluid Engineered for Use With Microfiltration Recycling

Open the PDF for in another window

Topics: Fluids , Membranes , Microfiltration

Thermal Assessment of Dynamic Rotor/Auxiliary Bearing Contact Events

Patrick S. Keogh, Woon Yik Yong

J. Tribol. January 2007, 129(1): 143–152. doi: https://doi.org/10.1115/1.2401209

Abstract

View articletitled, Thermal Assessment of Dynamic Rotor/Auxiliary Bearing Contact Events

Open the PDF for in another window

Topics: Bearings , Bushings , Rotors , Temperature , Magnetic bearings

Numerical Simulation of Operational-Shock in Small Form Factor Hard Disk Drives

P. Bhargava, D. B. Bogy

J. Tribol. January 2007, 129(1): 153–160. doi: https://doi.org/10.1115/1.2345403

Abstract

View articletitled, Numerical Simulation of Operational-Shock in Small Form Factor Hard Disk Drives

Open the PDF for in another window

Topics: Air bearings , Disks , Shock (Mechanics)

Design and Dynamics of Flying Height Control Slider With Piezoelectric Nanoactuator in Hard Disk Drives

Jia-Yang Juang, David B. Bogy, C. Singh Bhatia

J. Tribol. January 2007, 129(1): 161–170. doi: https://doi.org/10.1115/1.2401208

Abstract

View articletitled, Design and Dynamics of Flying Height Control Slider With Piezoelectric Nanoactuator in Hard Disk Drives

Open the PDF for in another window

Topics: Adhesion , Air bearings , Design , Disks , Stiffness , Damping , Stress , Dynamics (Mechanics) , Nanoscale phenomena , Magnetic recording

The Effect of Surface Features on Nanorheology of LCP Melts in Nanochannels by MD Simulation

Lan He, Kai Leung Yung, Yan Xu, Yun Wen Shen

J. Tribol. January 2007, 129(1): 171–176. doi: https://doi.org/10.1115/1.2401219

Abstract

View articletitled, The Effect of Surface Features on Nanorheology of LCP Melts in Nanochannels by MD Simulation

Open the PDF for in another window

Topics: Chain , Molecular dynamics simulation , Rheology , Shear (Mechanics) , Shear flow , Simulation , Springs , Surface roughness , Viscosity , Injection molding

Effect of Intermolecular Forces on the Dynamic Response of a Slider

Saurabh K. Deoras, Frank E. Talke

J. Tribol. January 2007, 129(1): 177–180. doi: https://doi.org/10.1115/1.2390720

Abstract

View articletitled, Effect of Intermolecular Forces on the Dynamic Response of a Slider

Open the PDF for in another window

Topics: Disks , Dynamic response , Impulse (Physics) , Intermolecular forces , Springs , Magnetic recording

Stribeck Curve for Starved Line Contacts

I. C. Faraon, D. J. Schipper

J. Tribol. January 2007, 129(1): 181–187. doi: https://doi.org/10.1115/1.2404964

Abstract

View articletitled, Stribeck Curve for Starved Line Contacts

Open the PDF for in another window

Topics: Film thickness , Friction , Lubrication , Stress , Surface roughness , Separation (Technology)

Effects of Ball Groupings on Ball Passage Vibrations of a Linear Guideway Type Ball Bearing (Pitching and Yawing Ball Passage Vibrations)

Hiroyuki Ohta, Yoshiki Kitajima, Soichiro Kato, Yutaka Igarashi

J. Tribol. January 2007, 129(1): 188–193. doi: https://doi.org/10.1115/1.2401215

Abstract

View articletitled, Effects of Ball Groupings on Ball Passage Vibrations of a Linear Guideway Type Ball Bearing (Pitching and Yawing Ball Passage Vibrations)

Open the PDF for in another window

Topics: Ball bearings , Bearings , Vibration , Yaw , Computational methods

Technical Briefs

Lobatto Point Quadrature for Thermal Lubrication Problems Involving Compressible Lubricants. EHL Applications

L. Moraru, T. G. Keith

J. Tribol. January 2007, 129(1): 194–198. doi: https://doi.org/10.1115/1.2404965

Abstract

View articletitled, Lobatto Point Quadrature for Thermal Lubrication Problems Involving Compressible Lubricants. EHL Applications

Open the PDF for in another window

Topics: Lubricants , Lubrication , Polynomials , Temperature , Viscosity , Pressure , Elastohydrodynamic lubrication , Algorithms , Density

Role of Distributed Interbristle Friction Force on Brush Seal Hysteresis

H. Zhao, R. J. Stango

J. Tribol. January 2007, 129(1): 199–204. doi: https://doi.org/10.1115/1.2401218

Abstract

View articletitled, Role of Distributed Interbristle Friction Force on Brush Seal Hysteresis

Open the PDF for in another window

Topics: Fibers , Friction , Rotors , Stress , Turbomachinery , Deformation , Wire , Aerodynamics , Leakage , Displacement

Influence of Wear on the Behavior of a Two-Lobe Hydrodynamic Journal Bearing Subjected to Numerous Startups and Stops

J. Bouyer, M. Fillon, I. Pierre-Danos

J. Tribol. January 2007, 129(1): 205–208. doi: https://doi.org/10.1115/1.2401210

Abstract

View articletitled, Influence of Wear on the Behavior of a Two-Lobe Hydrodynamic Journal Bearing Subjected to Numerous Startups and Stops

Open the PDF for in another window

Topics: Bearings , Journal bearings , Pressure , Temperature , Wear , Film thickness

Design Innovation

Load-Responsive Hydrodynamic Bearing for Downhole Drilling Tools

M. S. Kalsi, Ph.D., P. D. Alvarez, D. Somogyi, Ph.D., Aaron Richie

J. Tribol. January 2007, 129(1): 209–217. doi: https://doi.org/10.1115/1.2404963

Abstract

View articletitled, Load-Responsive Hydrodynamic Bearing for Downhole Drilling Tools

Open the PDF for in another window

Topics: Bearings , Stress , Thrust bearings , Drilling , Lubricants , Wedges , Engineering prototypes , Rollers

Technical Papers

Wear and Surface Characterization of Boronized Pure Iron

In Situ Investigation of Nanoabrasive Wear of Silicon

State and Rate Dependent Friction Laws for Modeling High-Speed Frictional Slip at Metal-on-Metal Interfaces

A Fracture Mechanics Approach to the Prediction of Tool Wear in Dry High-Speed Machining of Aluminum Cast Alloys—Part 1: Model Development

A Fracture Mechanics Approach to the Prediction of Tool Wear in Dry High Speed Machining of Aluminum Cast Alloys—Part 2: Model Calibration and Verification

Three-Dimensional Sliding Contact Analysis of Multilayered Solids With Rough Surfaces

Partial Plane Contact of an Elastic Curved Beam Pressed by a Flat Surface

Improved Analysis of Unstable Bouncing Vibration and Stabilizing Design of Flying Head Slider in Near-Contact Region

Static and Dynamic Characterization of a Bump-Type Foil Bearing Structure

An Experimental Investigation of Grease-Lubricated Journal Bearings

Numerical Model of a Reciprocating Hydraulic Rod Seal

Experimental Investigation of the Influence of Supply Temperature and Supply Pressure on the Performance of a Two-Axial Groove Hydrodynamic Journal Bearing

Stability-Optimized Clearance Configuration of Fluid-Film Bearings

Design of Flexure Pivot Tilting Pads Gas Bearings for High-speed Oil-Free Microturbomachinery

Computational Fluid Dynamics Analysis of Turbulent Flow Within a Mechanical Seal Chamber

Experimental and Numerical Investigation of a Gas Compressor Windback Seal

Development of a Novel Metalworking Fluid Engineered for Use With Microfiltration Recycling

Thermal Assessment of Dynamic Rotor/Auxiliary Bearing Contact Events

Numerical Simulation of Operational-Shock in Small Form Factor Hard Disk Drives

Design and Dynamics of Flying Height Control Slider With Piezoelectric Nanoactuator in Hard Disk Drives

The Effect of Surface Features on Nanorheology of LCP Melts in Nanochannels by MD Simulation

Effect of Intermolecular Forces on the Dynamic Response of a Slider

Stribeck Curve for Starved Line Contacts

Effects of Ball Groupings on Ball Passage Vibrations of a Linear Guideway Type Ball Bearing (Pitching and Yawing Ball Passage Vibrations)

Technical Briefs

Lobatto Point Quadrature for Thermal Lubrication Problems Involving Compressible Lubricants. EHL Applications

Role of Distributed Interbristle Friction Force on Brush Seal Hysteresis

Influence of Wear on the Behavior of a Two-Lobe Hydrodynamic Journal Bearing Subjected to Numerous Startups and Stops

Design Innovation

Load-Responsive Hydrodynamic Bearing for Downhole Drilling Tools

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Technical Briefs

Design Innovation

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only