Present understanding of the mechanisms of lubrication and the load carrying capacity of lubricant films mainly relies on models in which the Reynolds equation is used to describe the flow. The narrow gap assumption is a key element in its derivation from the Navier Stokes equations. However, the tendency in applications is that lubricated contacts have to operate at smaller film thickness levels, and because engineering surfaces are never perfectly smooth, locally in the film this narrow gap assumption may violated. In addition to this geometric limitation of the validity of the Reynolds equation may come a piezoviscous and compressibility related limitation. In this paper the accuracy of the predictions of the Reynolds model in relation to the local geometry of the gap is investigated. A numerical solution algorithm for the flow in a narrow gap has been developed based on the Stokes equations. For a model problem the differences between the pressure and velocity fields according to the Stokes model and the Reynolds equation have been investigated. The configuration entails a lower flat surface together with an upper surface (flat or parabolic) in which a local defect (single asperity) of known geometry has been embedded. It is investigated how the magnitude of the differences develops as a function of the geometric parameters of the film and the feature. Finally, it is discussed to what extend for these problems a perturbation approach can provide accurate corrections to be applied to the Reynolds solution.
Skip Nav Destination
Article navigation
January 2003
Technical Papers
Stokes Flow in Thin Films
D. E. A. van Odyck,
D. E. A. van Odyck
University of Twente, Faculty of Engineering Technology, Enschede, The Netherlands
Search for other works by this author on:
C. H. Venner
C. H. Venner
University of Twente, Faculty of Engineering Technology, Enschede, The Netherlands
Search for other works by this author on:
D. E. A. van Odyck
University of Twente, Faculty of Engineering Technology, Enschede, The Netherlands
C. H. Venner
University of Twente, Faculty of Engineering Technology, Enschede, The Netherlands
Contributed by the Tribology Division for publication in the ASME JOURNAL OF TRIBOLOGY. Manuscript received by the Tribology Division October 19, 2001 revised manuscript received June 26, 2002; Associate Editor: L. San Andre´s.
J. Tribol. Jan 2003, 125(1): 121-134 (14 pages)
Published Online: December 31, 2002
Article history
Received:
October 19, 2001
Revised:
June 26, 2002
Online:
December 31, 2002
Citation
van Odyck , D. E. A., and Venner, C. H. (December 31, 2002). "Stokes Flow in Thin Films ." ASME. J. Tribol. January 2003; 125(1): 121–134. https://doi.org/10.1115/1.1506317
Download citation file:
Get Email Alerts
Static Characteristics of Hybrid Water-Lubricated Herringbone Groove Journal Bearing
J. Tribol (April 2025)
Related Articles
Some Remarks on the Validity of Reynolds Equation in the Modeling of Lubricant Film Flows on the Surface Roughness Scale
J. Tribol (October,2004)
Compression of a Single Transverse Ridge in a Circular Elastohydrodynamic Contact
J. Tribol (April,2003)
Interaction of Asperities on Opposing Surfaces in Thin Film, Mixed Elastohydrodynamic Lubrication
J. Tribol (April,2008)
Piston Ring-Cylinder Bore Friction Modeling in Mixed Lubrication Regime: Part I—Analytical Results
J. Tribol (January,2001)
Related Proceedings Papers
Related Chapters
On the Evaluation of Thermal and Mechanical Factors in Low-Speed Sliding
Tribology of Mechanical Systems: A Guide to Present and Future Technologies
Effectiveness of Minimum Quantity Lubrication (MQL) for Different Work Materials When Turning by Uncoated Carbide (SNMM and SNMG) Inserts
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)
Hydrodynamic Lubrication
Design of Mechanical Bearings in Cardiac Assist Devices