Savonius rotor, a class of drag-driven vertical axis wind turbine, has been extensively investigated mainly to calculate the torque and power coefficients (CT and CP) by various investigators. Hitherto, studies related to lift and drag characteristics are very few and have mainly been restricted to a semicircular-bladed rotor. A deeper investigation into the drag and lift coefficients (CD and CL) can result in the better design of rotor blades leading to an increment in CT and CP. In view of this, in the present investigation, CD and CL of an elliptical-bladed rotor with vent augmenters have been studied numerically. Initially, two-dimensional (2D) unsteady simulations using an ansys fluent solver is carried out to estimate the instantaneous CD and CL. The shear stress transport (SST) k–ω turbulence model is selected to solve the Reynolds averaged Navier Stokes (RANS) equations. Finally, three-dimensional (3D) unsteady simulations are carried out for the vented elliptical-bladed rotor. The unsteady simulations are performed for the nonvented elliptical- and semicircular-bladed rotors at the identical condition in order to have a direct comparison. From the unsteady simulations, the average CD for the vented elliptical profile is found to be 1.45; whereas, the average CD for the nonvented elliptical and semicircular profiles is found to be 1.43 and 1.35, respectively.
Skip Nav Destination
Article navigation
October 2019
Research-Article
Drag and Lift Characteristics of a Novel Elliptical-Bladed Savonius Rotor With Vent Augmenters
Nur Alom,
Nur Alom
Department of Mechanical Engineering,
Shillong 793003,
e-mail: nur.alam@nitm.ac.in
National Institute of Technology Meghalaya
,Shillong 793003,
India
e-mail: nur.alam@nitm.ac.in
Search for other works by this author on:
Ujjwal K. Saha
Ujjwal K. Saha
Professor
Department of Mechanical Engineering,
Guwahati 781039,
e-mail: saha@iitg.ac.in
Department of Mechanical Engineering,
Indian Institute of Technology Guwahati
,Guwahati 781039,
India
e-mail: saha@iitg.ac.in
Search for other works by this author on:
Nur Alom
Department of Mechanical Engineering,
Shillong 793003,
e-mail: nur.alam@nitm.ac.in
National Institute of Technology Meghalaya
,Shillong 793003,
India
e-mail: nur.alam@nitm.ac.in
Ujjwal K. Saha
Professor
Department of Mechanical Engineering,
Guwahati 781039,
e-mail: saha@iitg.ac.in
Department of Mechanical Engineering,
Indian Institute of Technology Guwahati
,Guwahati 781039,
India
e-mail: saha@iitg.ac.in
Contributed by the Solar Energy Division of ASME for publication in the Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation. Manuscript received July 13, 2018; final manuscript received March 23, 2019; published online May 2, 2019. Assoc. Editor: Douglas Cairns.
J. Sol. Energy Eng. Oct 2019, 141(5): 051007 (12 pages)
Published Online: May 2, 2019
Article history
Received:
July 13, 2018
Revision Received:
March 23, 2019
Accepted:
April 10, 2019
Citation
Alom, N., and Saha, U. K. (May 2, 2019). "Drag and Lift Characteristics of a Novel Elliptical-Bladed Savonius Rotor With Vent Augmenters." ASME. J. Sol. Energy Eng. October 2019; 141(5): 051007. https://doi.org/10.1115/1.4043516
Download citation file:
Get Email Alerts
Cited By
A Nonintrusive Optical Approach to Characterize Heliostats in Utility-Scale Power Tower Plants: Camera Position Sensitivity Analysis
J. Sol. Energy Eng (December 2024)
A Solar Air Receiver With Porous Ceramic Structures for Process Heat at Above 1000 °C—Heat Transfer Analysis
J. Sol. Energy Eng (April 2025)
View Factors Approach for Bifacial Photovoltaic Array Modeling: Bifacial Gain Sensitivity Analysis
J. Sol. Energy Eng (April 2025)
Resources, Training, and Education Under the Heliostat Consortium: Industry Gap Analysis and Building a Resource Database
J. Sol. Energy Eng (December 2024)
Related Articles
Examining the Aerodynamic Drag and Lift Characteristics of a Newly Developed Elliptical-Bladed Savonius Rotor
J. Energy Resour. Technol (May,2019)
Comparison of Various Blade Profiles in a Two-Blade Conventional Savonius Wind Turbine
J. Energy Resour. Technol (February,2021)
Evolution and Progress in the Development of Savonius Wind Turbine Rotor Blade Profiles and Shapes
J. Sol. Energy Eng (June,2019)
Effect of Capped Vents on Torque Distribution of a Semicircular-Bladed Savonius Wind Rotor
J. Energy Resour. Technol (October,2019)
Related Proceedings Papers
Related Chapters
Modeling of SAMG Operator Actions in Level 2 PSA (PSAM-0164)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)
Pulsating Supercavities: Occurrence and Behavior
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Pressure Testing
Power Piping