This paper presents the design and analysis for a spar cap for a wind turbine rotor blade. The cap is formed of an integral, unitary 3D woven material (3WEAVE®) having constant thickness; spar cap weight is varied and controlled by appropriately tapering the cap width from the blade root to tip. This analysis is employed for 24-m and 37-m rotor blades. These studies are conducted parametrically, examining a range of 3WEAVE® materials incorporating varying fractions of glass and carbon fibers, and hence exhibiting a range of structural properties and material costs. These parametric studies are used to determine the impact on blade weight and cost resulting from the various materials studied. Detailed results are presented in the form of tables to enable candidate materials to be evaluated as they are developed.

Issue Section:
Research Papers
Keywords:
wind turbines, rotors, blades, carbon fibres, weaving
Topics:
Blades, Spar platforms, Wing spars, Glass, Rotors, Textiles, Wind turbines, Carbon, Design
1.
Anon
, 2006,
Wind Power Today
, DOE/GO-102006-2319,
U. S. Department of Energy, Washington, DC.
2.
Griffin
,
D. A.
, and
Zuteck
,
M. D.
, 2001, “
Scaling of Composite Wind Turbine Blades for Rotors of 80 to 120 Meter Diameter
,” AIAA-2001-0021,
A Collection of the 2001 ASME Wind Energy Symposium, Technical Papers at the 39th AIAA Aerospace Sciences Meeting and Exhibit
,
American Institute of Aeronautics and Astronautics and American Society of Mechanical Engineers
,
New York
.
3.
Joose
,
P.
, et al., 2000, “
Economic Use of Carbon Fibers in Large Wind Turbine Blades
,”
A Collection of the 2000 ASME Wind Energy Symposium Technical Papers at the 38th AIAA Aerospace Sciences Meeting and Exhibit
,
American Institute of Aeronautics and Astronautics and American Society of Mechanical Engineers
, New York, p.
367
.
4.
Mohamed
,
Mansour
,
H.
,
Zhang
, and
Zhonghuai
, 1992,
Method of Forming Variable Cross-Sectional Shaped Three-Dimensional Fabrics
, United States Patent 5,085,252.
5.
Brandt
,
J.
,
Drechsler
,
K.
,
Mohamed
,
M.
, and
Gu
,
P.
, 1992, “
Manufacture and Performance of Carbon/Epoxy 3-D Woven Composites
,”
Proceedings of the 37th International SAMPE Symposium
,
Society for the Advancement of Material and Process Engineering
, Covina, CA.
6.
Bogdanovich
,
A.
,
Singletary
,
J.
, and
Mohamed
,
M.
, 2001, “
A New Generation of Composites Reinforced with 3-D Woven Fabric Preforms
,”
Proceedings of the 22nd International SAMPE Europe Conference
,
Society for the Advancement of Material and Process Engineering
, Covina, CA, pp.
305
–
316
.
7.
Mohamed
,
Mansour
,
H.
,
Bogdanovich
,
A. E.
,
Dickinson
,
L. C.
,
Singletary
,
J. N.
, and
Lienhart
,
R. B.
, 2001, “
A New Generation of 3D Woven Fabric Preforms and Composites
,”
SAMPE J.
0091-1062,
37
(
3
), pp.
8
–
17
.
8.
Anon
., 1999,
Regulations for the Certification of Wind Energy Conversion Systems
,
Germanischer Lloyd
, Hamburg.
9.
Anon
., 1998,
Wind Turbine Generator Systems, Part 1: Safety Requirements
, IEC Standard 61400-1,
International Electrotechnical Commission
, Geneva.
10.
Somers
,
D. M.
, 2004,
S816, S817, and S818 Airfoils: October 1991-July 1992
, Report SR-500-36333,
National Renewable Energy Laboratory
, Golden, CO.
11.
Wetzel
,
K. K.
, 2005, “
Utility Scale Twist-Flap Coupled Blade Design
,”
Sol. Energy
0038-092X,
127
(
4
), pp.
529
–
537
.
Crossref
Search ADS
 
12.
Selig
,
M. S.
, and
Wetzel
,
K. K.
, 2003,
Airfoil Configuration for Wind Turbine
, U.S. Patent 6,503,058.
Copyright © 2006
 by American Society of Mechanical Engineers
You do not currently have access to this content.