...@hardlock.co.jp e-mail:  sekiguch@hiro.kindai.ac.jp 15 10 2021 15 01 2022 08 03 2022 bolted joint FEM stress analysis load factor design method dissimilar joint members Bolted joints are widely used in a lot of industrial fields such as mechanical structures, architecture...

... , Southfield, MI. [20] ASME , 2015 , ASME Boiler and Pressure Vessel Code Section VIII Div. 1, Rules for Construction of Pressure Vessels , ASME , New York . e-mail:  hakim.bouzid@etsmtl.ca 30 03 2020 27 05 2021 19 07 2021 FRP flanges anisotropy stress analysis...

... Rules in UPV, CODAP, and ASME ,” ASME J. Pressure Vessel Technol. , 122 ( 3 ), pp. 317 – 324 . 10.1115/1.556188 [10] Hwang , K. C. , Xue , M. D. , and Li , S. Y. , 1980 , “ A Proposed Method of Stress Analysis on Stationary Tubesheets of Heat Exchangers ,” Fourth...

.... In addition, by assuming a final small gap at maximum applied force between frame members, yoke, and column, this stress would be reduced more. Furthermore, there is a very good agreement between the results of new approach and finite element method. wire-winding frame prestressing stress analysis...

... shows that the maximum stress of the modified structure is reduced obviously in the same condition, and the leak of liner also can be detected effectively. 07 08 2010 20 11 2011 17 05 2012 18 05 2012 layered urea reactor stress analysis leak detection modified weld...

... Layer Clamping High Pressure Vessel Code, HG 3129-1998, 1998 . 5 Jinsong , Z. , Hantong , Z. , and Xinwen , T. , 1998 , “ The Experiment Research and Stress Analysis of the End Construction of the Multilayer Wrapped Pressure Vessel ,” Journal of Pressure Equipment and Systems , 15...

... the stress amplitude at the first thread root of bolt. 10 09 2009 26 05 2011 03 10 2011 03 10 2011 failure (mechanical) fasteners fatigue finite element analysis stress analysis Threaded fasteners are the most widely used machine elements to clamp structural members...

... 2011 03 10 2011 coke elasticity fatigue cracks finite element analysis petroleum industry plasticity production equipment stress analysis coke drum cyclic thermal loading elastic-plastic analysis elastic/plastic shakedown hot/cold spot finite element analysis (FEA...

... (structures) pressure vessels stress analysis hole crack stress intensity factor boundary element crack-tip element displacement discontinuity Due to the stress concentration effect around the hole, cracks are likely to initiate at the hole under the action of fatigue loading...

... method for this stress analysis by considering the radial contraction of the deck as an enforced displacement of the joint between the deck and the pontoon. First, the effectiveness of the previous method in estimating the hoop membrane stress at the joint with the deck is confirmed by comparing...

... on elastic and inelastic analysis methods. The heat exchanger tube sheet thickness is nonstandard as it is considerably less than that required by conventional design by formula rules. Ratcheting assessment performed using elastic stress analysis and stress linearization indicates that shakedown occurs under...

... and the associated criteria for avoiding the effects of creep. boilers creep failure (mechanical) fission reactors nuclear power stations pressure vessels softening stress analysis 11 04 2009 11 05 2010 14 02 2011 14 02 2011 We are grateful to Richard Wright of the Idaho...

.... Pressure Vessel Technol. 0094-9930 , 116 , pp. 207 – 215 . 10.1115/1.2929578 Sawa , T. , Higurashi , N. , and Akagawa , H. , 1991 , “ A Stress Analysis of Pipe Flange Connections ,” ASME J. Pressure Vessel Technol. 0094-9930 , 113 , pp. 497 – 503 . 10.1115/1.2928786...

... fields. 16 04 2007 24 05 2009 20 01 2011 20 01 2011 internal stresses stress analysis stress corrosion cracking surface cracks The primary driving force in stress corrosion cracking (SCC) is the residual stress field caused by welding. Generally, the residual stress...

... stainless steel stress analysis stress corrosion cracking multiple flaws collapse bending stress failure membrane stress limit load criterion fitness for service Stress corrosion cracks have been identified in stainless steel piping systems of nuclear power plants. Except for flux...

... on the temperature measurement data at a certain location on the outer surface of the coke drum. The temperature history of the coke drum of a complete cycle is then obtained by finite element heat transfer analysis, and computed temperature data are used for the stress analysis of the coke drum, including both...

... stress methodology. Some HEP life management programs may vaguely discuss using the principal stress based on a finite element analysis of the piping system. These principal stress values may be based on a conventional as-designed piping stress analysis. In the majority of the as-found piping stress...

... pressure vessels stress analysis The calculation formulae given by Pimshtein ( 1 ) are as follows. The axial stress in the layer, at i ≤ k . 37 σ z i = 1 − 2 μ β 2 − 1 p + 2 μ β k + 1 2 − 1 + χ k + 1 ( r i...

.... , 2006 , Viscoelastic Fracture Mechanics , Scientific , Beijing, China . Cai , E. , 1989 , Viscoelastic Mechanics , Beijing University of Aeronautics and Astronautics , Beijing, China . Zheng , J. Y. , Lin , X. F. , and Lu , Y. B. , 2006 , “ Stress Analysis of Plastic...

...Ming-De Xue; Qing-Hai Du; Keh-Chih Hwang; Zhi-Hai Xiang An improved version of the analytical solutions by Xue, Hwang and co-workers (1991, “Some Results on Analytical Solution of Cylindrical Shells With Large Opening,” ASME J. Pressure Vessel Technol., 113, 297–307 ; 1991, “The Stress Analysis...