Topics: Base metals , Cladding systems (Building) , Coke , Fluids , Temperature distribution , Thermoelasticity , Transients (Dynamics) , Water , Boundary-value problems , Finite element analysis

Burst Pressure Determination of Vehicle Toroidal Oval Cross-Section LPG Fuel Tanks

Yasin Kisioglu

J. Pressure Vessel Technol. June 2011, 133(3): 031202. doi: https://doi.org/10.1115/1.4002863

Abstract

View articletitled, Burst Pressure Determination of Vehicle Toroidal Oval Cross-Section LPG Fuel Tanks

Open the PDF for in another window

Topics: Finite element analysis , Fuel storage , Pressure , Shells , Vehicles , Failure , Failure analysis

Thermal Hot Spot and Corrosion Damage in Conical Pressure Components

R. Adibi-Asl, R. Seshadri

J. Pressure Vessel Technol. June 2011, 133(3): 031203. doi: https://doi.org/10.1115/1.4001923

Abstract

View articletitled, Thermal Hot Spot and Corrosion Damage in Conical Pressure Components

Open the PDF for in another window

Topics: Corrosion , Damage , Pressure , Shells , Stress , Finite element analysis

The Limit Load Interactions of the Brazed Aluminum Plate-Fin Heat Exchanger Header Under Combined Piping Loads

Wei Wang, Liang Chen, Caidong Guo

J. Pressure Vessel Technol. June 2011, 133(3): 031204. doi: https://doi.org/10.1115/1.4002050

Abstract

View articletitled, The Limit Load Interactions of the Brazed Aluminum Plate-Fin Heat Exchanger Header Under Combined Piping Loads

Open the PDF for in another window

Topics: Pipes , Stress , Aluminum , Heat exchangers

Modeling Hydraulically Expanded Tube-to-Tubesheet Joint Based on General Stress-Strain Curves of Tube and Tubesheet Materials

Xiaoping Huang, Tian Xie

J. Pressure Vessel Technol. June 2011, 133(3): 031205. doi: https://doi.org/10.1115/1.4002259

Abstract

View articletitled, Modeling Hydraulically Expanded Tube-to-Tubesheet Joint Based on General Stress-Strain Curves of Tube and Tubesheet Materials

Open the PDF for in another window

Topics: Deformation , Finite element analysis , Pressure , Stress-strain curves , Clearances (Engineering) , Stress , Work hardening

Shakedown Analysis of a Composite Cylinder With a Cross-Hole

Haofeng Chen, Weihang Chen, Tianbai Li, James Ure

J. Pressure Vessel Technol. June 2011, 133(3): 031206. doi: https://doi.org/10.1115/1.4002264

Abstract

View articletitled, Shakedown Analysis of a Composite Cylinder With a Cross-Hole

Open the PDF for in another window

Topics: Composite materials , Cylinders , Stress , Plasticity , Yield stress , Temperature

Shakedown Limit Loads for 90 Degree Scheduled Pipe Bends Subjected to Steady Internal Pressure and Cyclic Bending Moments

Hany F. Abdalla, Mohammad M. Megahed, Maher Y. A. Younan

J. Pressure Vessel Technol. June 2011, 133(3): 031207. doi: https://doi.org/10.1115/1.4002055

Abstract

View articletitled, Shakedown Limit Loads for 90 Degree Scheduled Pipe Bends Subjected to Steady Internal Pressure and Cyclic Bending Moments

Open the PDF for in another window

Topics: Pipe bends , Pressure , Stress , Finite element analysis

Assessment of Overlapped Internal and External Volumetric Flaws in $p - M$ Diagram

Shinji Konosu, Hikaru Miyata

J. Pressure Vessel Technol. June 2011, 133(3): 031208. doi: https://doi.org/10.1115/1.4002053

Abstract

View articletitled, Assessment of Overlapped Internal and External Volumetric Flaws in <span class="inline-formula no-formula-id"><span class="mathFormula"></span><math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mi>p</mi><mtext>-</mtext><mi>M</mi></mrow></math></span> Diagram

Open the PDF for in another window

Topics: Collapse , Cylinders , Finite element analysis , Pressure , Stress

Fluid-Structure Interaction

Study of Fluid Effects on Dynamics of Composite Structures

Y. W. Kwon

J. Pressure Vessel Technol. June 2011, 133(3): 031301. doi: https://doi.org/10.1115/1.4002377

Abstract

View articletitled, Study of Fluid Effects on Dynamics of Composite Structures

Open the PDF for in another window

Topics: Composite materials , Fluid structure interaction , Water , Fluids

CFD Tool for Assessment of the Reactor Pressure Vessel Integrity in Pressure Thermal Shock Conditions: Influence of Turbulence Model and Mesh Refinement on the Vessel Thermal Loading During PTS Transient

A. Martin, S. Benhamadouche, G. Bezdikian, F. Beaud, F. Lestang

J. Pressure Vessel Technol. June 2011, 133(3): 031302. doi: https://doi.org/10.1115/1.3027494

Abstract

View articletitled, CFD Tool for Assessment of the Reactor Pressure Vessel Integrity in Pressure Thermal Shock Conditions: Influence of Turbulence Model and Mesh Refinement on the Vessel Thermal Loading During PTS Transient

Open the PDF for in another window

Topics: Boundary-value problems , Computational fluid dynamics , Fluids , Geometry , Nozzles , Safety , Temperature , Thermal shock , Transients (Dynamics) , Turbulence

Materials and Fabrication

Prediction of Ductile-to-Brittle Transition Under Different Strain Rates in Undermatched Welded Joints

Masahito Mochizuki, Masao Toyoda

J. Pressure Vessel Technol. June 2011, 133(3): 031401. doi: https://doi.org/10.1115/1.4002670

Abstract

View articletitled, Prediction of Ductile-to-Brittle Transition Under Different Strain Rates in Undermatched Welded Joints

Open the PDF for in another window

Topics: Brittle fracture , Brittleness , Deformation , Ductile fracture , Dynamic testing (Materials) , Fracture (Materials) , Fracture (Process) , Fracture toughness , Numerical analysis , Stress

Analytical Study of the Relaxation of Welding Residual Stress by Excessive Loading for Austenitic Stainless Steel Piping Welds

Jinya Katsuyama, Kunio Onizawa

J. Pressure Vessel Technol. June 2011, 133(3): 031402. doi: https://doi.org/10.1115/1.4002260

Abstract

View articletitled, Analytical Study of the Relaxation of Welding Residual Stress by Excessive Loading for Austenitic Stainless Steel Piping Welds

Open the PDF for in another window

Topics: Pipes , Relaxation (Physics) , Stress , Welded joints , Welding

Crack Initiation Process for Semicircular Notched Plate in Fatigue Test at Elevated Temperature

Bopit Bubphachot, Osamu Watanabe, Nobuchika Kawasaki, Naoto Kasahara

J. Pressure Vessel Technol. June 2011, 133(3): 031403. doi: https://doi.org/10.1115/1.4002539

Abstract

View articletitled, Crack Initiation Process for Semicircular Notched Plate in Fatigue Test at Elevated Temperature

Open the PDF for in another window

Topics: Cycles , Fatigue testing , Fracture (Materials) , Stress , Temperature

Pipeline Systems

The Effect of Prestrain on Ductile Fracture Toughness of Reeled Pipeline Steels

Tomasz Tkaczyk, Noel P. O’Dowd, Kamran Nikbin

J. Pressure Vessel Technol. June 2011, 133(3): 031701. doi: https://doi.org/10.1115/1.4002280

Abstract

View articletitled, The Effect of Prestrain on Ductile Fracture Toughness of Reeled Pipeline Steels

Open the PDF for in another window

Topics: Cycles , Fracture (Materials) , Fracture toughness , Pipelines , Pipes , Steel , Welding , Ductile fracture

Optimal Design of Onshore Natural Gas Pipelines

Wenxing Zhou, Maher A. Nessim

J. Pressure Vessel Technol. June 2011, 133(3): 031702. doi: https://doi.org/10.1115/1.4002496

Abstract

View articletitled, Optimal Design of Onshore Natural Gas Pipelines

Open the PDF for in another window

Topics: Corrosion , Design , Failure , Life cycle costing , Maintenance , Pipelines , Risk , Wall thickness , Pipes , Probability

Technology Reviews

Plant Life Management Models: A Comparison With Analysis of Impact on Both Safety and Nonsafety Issues

Paolo Contri, Bernhard Elsing

J. Pressure Vessel Technol. June 2011, 133(3): 034001. doi: https://doi.org/10.1115/1.4002553

Abstract

View articletitled, Plant Life Management Models: A Comparison With Analysis of Impact on Both Safety and Nonsafety Issues

Open the PDF for in another window

Topics: Maintenance , Nuclear power stations , Safety , Decision making

Technical Briefs

Study on Hardness and Elastic Modulus of Surface Nanostructured 304 Stainless Steel Using Two Mechanical Methods

Gang Ma, Xiang Ling

J. Pressure Vessel Technol. June 2011, 133(3): 034501. doi: https://doi.org/10.1115/1.4002554

Abstract

View articletitled, Study on Hardness and Elastic Modulus of Surface Nanostructured 304 Stainless Steel Using Two Mechanical Methods

Open the PDF for in another window

Topics: Elastic moduli , Microhardness , Nanoindentation , Stainless steel , Testing , Corrosion resistance

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Influence of water cover on the blast resistance of circular plates

J. Pressure Vessel Technol

Dynamic response and damage analysis of a large steel tank impacted by an explosive fragment

J. Pressure Vessel Technol

Predicting the effects of cryogenic treatment and impact-oscillatory loading on changes in the strength properties of stainless steels

J. Pressure Vessel Technol

Surface Strain Measurement for Non-Intrusive Internal Pressure Evaluation of A Cannon

J. Pressure Vessel Technol

Crack Growth Prediction Based on Uncertain Parameters Using Ensemble Kalman Filter

J. Pressure Vessel Technol (December 2024)

Research Papers

Codes and Standards

Assessment of Piping Field Failures and Burst Tests on Carbon Steel Pipes With Local Wall Thinning Using ASME Section XI Code Case N-597-2

Design and Analysis

Analytical Solution of the Thermoelasticity Problem in a Coke Drum With Cladding

Burst Pressure Determination of Vehicle Toroidal Oval Cross-Section LPG Fuel Tanks

Thermal Hot Spot and Corrosion Damage in Conical Pressure Components

The Limit Load Interactions of the Brazed Aluminum Plate-Fin Heat Exchanger Header Under Combined Piping Loads

Modeling Hydraulically Expanded Tube-to-Tubesheet Joint Based on General Stress-Strain Curves of Tube and Tubesheet Materials

Shakedown Analysis of a Composite Cylinder With a Cross-Hole

Shakedown Limit Loads for 90 Degree Scheduled Pipe Bends Subjected to Steady Internal Pressure and Cyclic Bending Moments

Assessment of Overlapped Internal and External Volumetric Flaws in $p - M$ Diagram

Fluid-Structure Interaction

Study of Fluid Effects on Dynamics of Composite Structures

CFD Tool for Assessment of the Reactor Pressure Vessel Integrity in Pressure Thermal Shock Conditions: Influence of Turbulence Model and Mesh Refinement on the Vessel Thermal Loading During PTS Transient

Materials and Fabrication

Prediction of Ductile-to-Brittle Transition Under Different Strain Rates in Undermatched Welded Joints

Analytical Study of the Relaxation of Welding Residual Stress by Excessive Loading for Austenitic Stainless Steel Piping Welds

Crack Initiation Process for Semicircular Notched Plate in Fatigue Test at Elevated Temperature

Pipeline Systems

The Effect of Prestrain on Ductile Fracture Toughness of Reeled Pipeline Steels

Optimal Design of Onshore Natural Gas Pipelines

Technology Reviews

Plant Life Management Models: A Comparison With Analysis of Impact on Both Safety and Nonsafety Issues

Technical Briefs

Study on Hardness and Elastic Modulus of Surface Nanostructured 304 Stainless Steel Using Two Mechanical Methods

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Codes and Standards

Design and Analysis

Fluid-Structure Interaction

Materials and Fabrication

Pipeline Systems

Technology Reviews

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only