For any pumping artificial lift system in the petroleum industry, the free gas significantly affects the performance of the pump and the system above the pump. A model, though not a complete two-phase flow model, has been developed for the effective prediction of separation efficiency across a wide range of production conditions. The model presented is divided into two main parts, the single-phase flow-field solution and the bubble-tracking method. The first part of the model solves the single-phase liquid flow field using the computational fluid dynamics approach. Then, a simple bubble-tracking method was applied to estimate the down-hole natural separation efficiency for two-phase flow. A comparison between the results of the model and the experimental data was conducted. It shows a very good agreement with the experimental data for lower gas void fractions (bubble flow regime).
Skip Nav Destination
Article navigation
November 2005
Research Papers
Use of a Bubble Tracking Method for Prediction of Downhole Natural Separation Efficiency
Bin Liu,
Bin Liu
University of Tulsa
, 600 S. College Ave., Tulsa, OK 74104
Search for other works by this author on:
Mauricio Prado
Mauricio Prado
University of Tulsa
, 600 S. College Ave., Tulsa, OK 74104
Search for other works by this author on:
Bin Liu
University of Tulsa
, 600 S. College Ave., Tulsa, OK 74104
Mauricio Prado
University of Tulsa
, 600 S. College Ave., Tulsa, OK 74104J. Pressure Vessel Technol. Nov 2005, 127(4): 479-486 (8 pages)
Published Online: June 9, 2005
Article history
Received:
August 19, 2004
Revised:
June 9, 2005
Citation
Liu, B., and Prado, M. (June 9, 2005). "Use of a Bubble Tracking Method for Prediction of Downhole Natural Separation Efficiency." ASME. J. Pressure Vessel Technol. November 2005; 127(4): 479–486. https://doi.org/10.1115/1.2043199
Download citation file:
Get Email Alerts
Cited By
Influence of water cover on the blast resistance of circular plates
J. Pressure Vessel Technol
Dynamic response and damage analysis of a large steel tank impacted by an explosive fragment
J. Pressure Vessel Technol
Surface Strain Measurement for Non-Intrusive Internal Pressure Evaluation of A Cannon
J. Pressure Vessel Technol
Related Articles
CFD Analysis of Electric Submersible Pumps (ESP) Handling Two-Phase Mixtures
J. Energy Resour. Technol (June,2004)
Modeling Two-Phase Flow Inside an Electrical Submersible Pump Stage
J. Energy Resour. Technol (December,2011)
Experimental Visualization of Two-Phase Flow Inside an Electrical Submersible Pump Stage
J. Energy Resour. Technol (December,2011)
Study of a Two-Phase Flow Pump and Separator System
J. Eng. Gas Turbines Power (June,2011)
Related Proceedings Papers
Related Chapters
CFD Simulations of a Mixed-flow Pump Using Various Turbulence Models
Mixed-flow Pumps: Modeling, Simulation, and Measurements
Experimental Investigation of Ventilated Supercavitation Under Unsteady Conditions
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Experimental results
Ultrasonic Methods for Measurement of Small Motion and Deformation of Biological Tissues for Assessment of Viscoelasticity