Design of FRP tanks and pressure vessels is based on criteria developed in the late 1960s using materials and procedures that represented the state of the art at the time. Maximum strain has been the controlling factor selected for the design of these vessels at an allowable level of 0.001. With the development of newer materials and systems with recorded performances of better than 0.001 this is now an inefficient limit in the design. Tests performed in the programs described in this paper indicate that newer materials perform well at higher strains. Results of strength tests performed here indicated that strains of 0.002 to 0.003 or better are possible in the safe design of tanks and pressure vessels. In addition, more accurate determination of design limits is possible if methods like acoustic emission are incorporated in the design process.

Issue Section:
Technical Papers
Keywords:
Fiber reinforced polymers, Fiberglass, Acoustic emission, Fatigue, Damage, Tanks, Pressure vessels, Pipes, pressure vessels, acoustic emission testing, fatigue testing
Topics:
Acoustic emissions, Design, Failure, Fibers, Pipes, Pressure, Pressure vessels, Stress, Fiber reinforced plastics, Resins, Vessels, Leakage, Fatigue, Knee, Damage
1.
Fowler
,
T. J.
, 1979, “Acoustic Emission of Fiber Reinforced Plastics,” Journal of the Technical Councils of ASCE, pp. 281–289.
2.
Gorman
,
M. R.
, 1997, “Modal AE: A New Understanding of Acoustic Emission,” J. Acoust. Emiss.
3.
Gorman, M. R., 1994, “New Technology for Wave Based Acoustic Emission and Acousto-Ultrasonics,” Wave Propagation and Emerging Technologies, AMD-Vol. 188, ASME, pp. 47–59.
4.
Fowler, T. J., and Gray, E., 1979, “Development of an Acoustic Emission Test for FRP Equipment,” American Society of Civil Engineers Convention and Exposition, Preprint 3538, Boston, April 1979, pp. 1–22.
5.
Isham, A. B., 1966, “Design of Fiberglass Reinforced Plastic Chemical Storage Tanks,” 21st Annual Meeting of the Reinforced Plastics Division, The Society of the Plastics Industry, Inc., Chicago IL.
6.
Ziehl, P., and Fowler, T. J., 2001, “Development of a Damage Based Design Criterion for Fiber Reinforced Polymer Vessels,” Proceedings of the ASME Pressure Vessels and Piping Conference, ASME, New York.
7.
Dow Plastics, “Derakane Epoxy Vinyl Ester Resins,” Technical Product Information, March 1996.
8.
Ashland Chemical, Technical Data, January 1998.
9.
Ziehl
,
P.
, and
Fowler
,
T.
, 2003, “Fiber Reinforced Polymer Vessel Design With a Damage Approach,” Journal of Composite Structures, in press.
10.
ASTM D2584-94, 1994, “Standard Test Method for Ignition Loss of Cured Reinforced Resins,” American Society of Testing and Materials, Pennsylvania, PA.
11.
The Committee on Acoustic Emission From Reinforced Plastics (CARP), 1999, “Recommended Practice for Acoustic Emission Evaluation of Fiber Reinforced Plastic (FRP) Tanks and Pressure Vessels,” Division of the Technical Council of The American Society for Nondestructive Testing, Inc., Draft I.
12.
Fowler, T. J., 1977, “Preprint 3092,” paper presented at The ASCE Fall Convention, San Francisco, CA, October 17–21, 1977; American Society of Civil Engineers, New York.
13.
Gorman
,
M. R.
,
1991
, “
Acoustic Emission in 2-D Carbon-Carbon Coupons in Tension
,”
J. Comp. Mater.
,
25
, pp.
703
–
714
.
14.
Whittaker
,
J. W.
,
Brosey
,
W. D.
, and
Hamstad
,
M. A.
,
1990
, “
Felicity Ratio Behavior of Pneumatically and Hydraulically Loaded Spherical Composite Test Specimens
,”
J. Acoust. Emiss.
,
9
(
2
), pp.
75
–
83
.
15.
Downs
,
K. S.
, and
Hamstad
,
M. A.
,
1995
, “
Correlation of Acoustic Emission Felicity Ratios and Hold-Based Rate Moments With Burst Strengths of Spherical Graphite/Epoxy Pressure Vessels
,”
J. Acoust. Emiss.
,
13
(
3
), pp.
45
–
55
.
16.
Fowler, T. J., Blessing, J. A., and Conlisk, P. J., 1989, “New Directions in Testing,” Third International Symposium on Acoustic Emission From Composite Materials, July 17–21, Paris, France, pp. 16–27.
17.
Hamstad
,
M. A.
,
Whittaker
,
J. W.
, and
Brosey
,
W. D.
,
1992
, “
Correlation of Residual Strength With Acoustic Emission From Impact-Damaged Composite Structures Under Constant Biaxial Load
,”
J. Comp. Mater.
,
26
(
15
), pp.
2307
–
2328
.
18.
Gorman, M. R., and Rytting, T. H., 1983, “Long Duration AE Events in Filament Wound Graphite/Epoxy in the 100–300 KHz Band Pass Region,” First International Symposium on Acoustic Emission From Reinforced Composites, The Society of the Plastics Industry, Inc.
19.
Downs
,
K. S.
, and
Hamstad
,
M. A.
,
1998
, “
Acoustic Emission From Depressurization to Detect/Evaluate Significance of Impact Damage to Graphite/Epoxy Pressure Vessels
,”
J. Comp. Mater.
,
32
(
3
), pp.
258
–
307
.
20.
American Society for Testing and Materials (ASTM) E1067, “Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks and Vessels,” ASTM, Philadelphia, PA.
21.
American Society of Mechanical Engineers, 1995, “Reinforced Thermoset Plastic Corrosion Resistant Equipment,” ASME RTP-1, ASME, New York.
22.
ASME Boiler and Pressure Vessel Committee, 1998, Subcommittee on Fiber-Reinforced Plastic Pressure Vessels, “Section X: Fiber Reinforced Plastic Pressure Vessels,” 1998 Edition with subsequent addenda, ASME, New York.
23.
Ramirez, G., and Engelhardt, M. D., 2002, “Use of Acoustic Emission for Determination of Endurance Limits of Fiberglass Pipes Built According to RTP-1 Specifications,” ASNT Journal of Research in Nondestructive Evaluation, Submitted for review.
24.
Ramirez, G., and Engelhardt, M. D., 2000, “Results From Fatigue Tests of Composite Pipes,” International Society of Offshore and Polar Engineering, Seattle, WA.
25.
British Standard for Design and Construction of Vessels and Tanks in Reinforced Plastics, 1987 BS4994-1987.
26.
ISO/DIIS 11119, “Gas Cylinders of Composite Construction—Specification and Test Methods,” prepared by Technical Committee ISO/TC 58, Gas Cylinders, Sub-Committee SC3, Cylinder Design, International Organization for Standardization, Secretariat: British Standards Institute (UK).
Copyright © 2004
 by ASME
You do not currently have access to this content.