The paper proposes the study of the kinetostatic behavior of a flexible universal joint for minirobotic applications. A closed-form formulation of joint’s compliance is obtained for linear elastic material and small displacements. It is also presented a numerical study that considers the joint realized with a superelastic shape memory alloys (SMA) material (Ni–Ti alloy); in this case, a finite element (FE) approach is used to overcome the strong nonlinearities arising from both the superelastic constitutive law and the large displacements. Besides the compliance properties of the joint, also kinematic performances are investigated, since the instantaneous rotation axis is expected to be floating around its ideal position because of parasitic elastic deformations.

Issue Section:
Research Papers
Keywords:
flexible joint, flexure hinges, micromechanics, superelastic materials (SMA).
Topics:
Deformation, Finite element model, Hinges, Kinematics, Nickel titanium alloys, Rotation, Stress, Universal joints, Bending (Stress), Constitutive equations, Finite element analysis, Micromechanics (Engineering)

References

1.
Popa
,
D. O.
, and
Stephanou
,
H. E.
, 2004, “
Micro and Mesoscale Robotic Assembly
,”
J. Manuf. Process.
,
6
(
1
), pp.
52
–
71
.
Crossref
Search ADS
 
2.
Cecil
,
J.
,
Powell
,
D.
, and
Vasquez
,
D.
, 2007, “
Assembly and Manipulation of Micro Devices—A State of the Art Survey
,”
Rob. Comput.-Integr. Manuf.
,
23
, pp.
580
–
588
.
Crossref
Search ADS
 
3.
Trease
,
B. P.
,
Moon
,
Y.-M.
, and
Kota
,
S.
, 2005, “
Design of Large-Displacement Compliant Joints
,”
J. Mech. Des.
,
127
, pp.
788
–
798
.
Crossref
Search ADS
 
4.
Bruzzone
,
L.
, and
Molfino
,
R. M.
, 2006, “
A Novel Parallel Robot for Current Microassembly Applications
,”
Assem. Autom.
,
26
(
4
), pp.
299
–
306
.
Crossref
Search ADS
 
5.
Dong
,
W.
,
Sun
,
L. N.
, and
Du
,
Z. J.
, 2007, “
Design of a Precision Compliant Parallel Positioner Driven by Dual Piezoelectric Actuators
,”
Sens. Actuators
,
135
, pp.
250
–
256
.
Crossref
Search ADS
 
6.
Yong
,
Y. K.
,
Lu
,
T.-F.
, and
Handley
,
D. C.
, 2008, “
Review of Circular Flexure Hinge Design Equations and Derivation of Empirical Formulations
,”
Precis. Eng.
,
32
, pp.
63
–
70
.
Crossref
Search ADS
 
7.
Gao
,
F.
,
Jianjun
,
Z.
,
Yulong
,
C.
, and
Zhenlin
,
J.
, 2003, “
Development of a New Type of 6-DOF Parallel Micro-Manipulator and Its Control System
,”
Proceedings of the IEEE International Conference on Robotics
,
Intelligent Systems and Signal Processing
,
Changsha, China
.
8.
Li
,
Y.
, and
Xu
,
Q.
, 2005, “
Novel Design of a 3-PUU Spatial Compliant Parallel Micromanipulator for Nanomanipulation
,”
Proceedings of the IEEE International Conference on Mechatronics and Automation
,
Niagara Falls
,
Canada
.
9.
Palpacelli
,
M.-C.
,
Palmieri
,
G.
, and
Callegari
,
M.
, 2012, “
A Redundantly Actuated 2-DOF Mini Pointing Device
,”
J. Mech. Rob.
,
4
, p.
031012
.
Crossref
Search ADS
 
10.
Paros
,
J.
, and
Weisbord
,
L.
, 1965, “
How to Design Flexure Hinge
,”
Mach. Des.
,
37
, pp.
151
–
156
.
11.
Smith
,
S. T.
, 2000,
Flexures: Elements of Elastic Mechanisms
,
Gordon & Breach
,
New York
.
12.
Lobontiu
,
N.
, 2003,
Compliant Mechanisms: Design of Flexure Hinges
,
CRC Press
,
Boca Raton, FL
.
13.
Lobontiu
,
N.
, and
Garcia
,
E.
, 2003, “
Two-Axis Flexure Hinges With Axially-Collocated and Symmetric Notches
,”
Comput. Struct.
,
81
, pp.
1329
–
1341
.
Crossref
Search ADS
 
14.
Joung
,
W. C.
, and
Budynas
,
R. G.
, 2002,
Roark’s Formulas for Stress and Strain
, 7th ed.,
McGraw Hill
,
New York
.
15.
Hesselbach
,
J.
, and
Raatz
,
A.
, 2000, “
Pseudo-Elastic Flexure-Hinges in Robots for Micro Assembly
,”
Proc. SPIE
,
4194
, pp.
157
–
167
.
16.
Hesselbach
,
J.
,
Raatz
,
A.
, and
Kunzmann
,
H.
, 2004, “
Performance of Pseudo-Elastic Flexure Hinges in Parallel Robots for Micro-Assembly Tasks
,”
CIRP Ann. – Manuf. Technol.
,
53
(
1
), pp.
329
–
332
.
Crossref
Search ADS
 
17.
Auricchio
,
F.
, 1995, “
Shape Memory Alloys: Applications, Micromechanics, Macromodelling, and Numerical Simulations
,” Ph.D. Dissertation, University of California at Berkeley.
18.
Auricchio
,
F.
, 2001, “
A Robust Integration-Algorithm for a Finite-Strain Shape-Memory-Alloy Superelastic Model
,”
Int. J. Plast.
,
17
(
7
), pp.
971
–
990
.
Crossref
Search ADS
 
19.
De la Flor
,
S.
,
Urbina
,
C.
, and
Ferrando
,
F.
, 2006, “
Constitutive Model of Shape Memory Alloys: Theoretical Formulation and Experimental Validation
,”
Mater. Sci. Eng. A
,
427
, pp.
112
–
122
.
Crossref
Search ADS
 
20.
Brinson
,
L. C.
, and
Huang
,
M. S.
, 1996, “
Simplifications and Comparisons of Shape Memory Alloy Constitutive Models
,”
J. Intell. Mater. Syst. Struct.
,
7
, pp.
108
–
114
.
Crossref
Search ADS
 
21.
ANSYS, Inc., 2004, “Theory Reference,” Release 9.0.
22.
Stoeckel
D.
, 1990, “
Shape-Memory Alloys Prompt New Actuator Designs
,”
Adv. Mater. Process.
,
138
, pp.
33
–
38
.
23.
Mellor
B. G.
, 1987,
The Science and Technology of Shape Memory Alloys
,
V.
Torra
, ed.,
Impresrapit
,
Barcelona
, p.
334
.
24.
Besselink
P. A.
, 1987,
The Science and Technology of Shape Memory Alloys
,
V.
Torra
, ed.,
Impresrapit
,
Barcelona
, p.
407
.
Copyright © 2012
 by American Society of Mechanical Engineers
You do not currently have access to this content.