This paper presents an original technique to locate the center of curvature of the path traced by an arbitrary point fixed in the coupler link of a planar four-bar linkage. The method is purely graphical and the center of curvature; i.e., the center of the osculating circle, can be located in a direct manner with few geometric constructions. The advantage of this technique, compared to the classical approach using the Euler-Savary equation, is that measurements of angles and distances between points are not required. Also, it is not necessary to locate inflection points or draw the inflection circle for the instantaneous motion of the coupler link. The technique is based on the concept of a virtual link which is valid up to, and including, the second-order properties of motion of the coupler link. The virtual link is coincident with the path normal to the coupler curve; i.e., the line connecting the coupler point to the velocity pole of the coupler link. The absolute instant center of the virtual link defines the ground pivot for the link and is, therefore, coincident with the center of the osculating circle. The authors believe that the graphical approach presented in this paper represents an important contribution to the kinematics literature on the curvature of a point trajectory.

Issue Section:
Technical Papers
Keywords:
Coupler Point Trajectory, Center of Curvature, Osculating Circle, Virtual Link, Graphical Techniques, engineering graphics, computational geometry, mechanical engineering computing, poles and zeros
Topics:
Linkages, Poles (Building), Trajectories (Physics), Kinematics
1.
Hrones, J. A., and Nelson, G. L., 1951, Analysis of the Four-Bar Linkage; Its Application to the Synthesis of Mechanisms, The Technology Press, MIT Press, Cambridge, MA.
2.
Erdman, A. G., 1993, Modern Kinematics, Developments in the Last Forty Years, Wiley, Wiley Series in Design Engineering, New York.
3.
Beyer, R., 1963, The Kinematic Synthesis of Mechanisms, Chapman and Hall, London, England.
4.
Hunt, K. H., 1978, Kinematic Geometry of Mechanisms, Clarendon Press, Oxford, England.
5.
Erdman, A. G., Sandor, G. N., and Kota, S., 2001, Mechanism Design, Vol. 1, 4th ed., Prentice-Hall, Upper Saddle River, New Jersey.
6.
Uicker, J. J., Jr., Pennock, G. R., and Shigley, J. E., 2003, Theory of Machines and Mechanisms, 3rd ed., Oxford University, New York.
7.
Hain, K., 1967, Applied Kinematics, 2nd ed., McGraw-Hill, New York.
8.
Dijksman, E. A., 1976, Motion Geometry of Mechanisms, Cambridge University Press, Cambridge, England.
9.
Hall, A. S., Jr., 1986, Kinematics and Linkage Design, Waveland Press, Prospect Heights, Illinois (Originally published by Prentice-Hall, Inc., 1961).
10.
Waldron, K. J., and Kinzel, G. L., 1999, Kinematics, Dynamics, and Design of Machinery, Wiley, New York.
11.
Pennock, G. R., and Sankaranarayanan, H., 2003, “Path Curvature of a Geared Seven-Bar Mechanism,” Mechanism and Machine Theory, Vol. 38, No. 12, October, Pergamon Press, Great Britain, pp. 1345–1361.
12.
Pennock
,
G. R.
, and
Kinzel
,
E. C.
,
2004
, “
Path Curvature of the Single Flier Eight-Bar Linkage
,”
ASME J. Mech. Des.
,
126
, pp.
470
–
477
.
13.
Pennock
,
G. R.
, and
Raje
,
N. N.
,
2004
, “
Curvature Theory for the Double Flier Eight-Bar Linkage
,”
Mech. Mach. Theory
,
39
(
7
), pp.
665
–
679
.
14.
Sandor
,
G. N.
,
Xu
,
Y.
, and
Weng
,
T.-C.
,
1990
, “
A Graphical Method for Solving the Euler-Savary Equation
,”
Mech. Mach. Theory
,
25
141
–
147
.
15.
Yang
,
A. T.
,
Pennock
,
G. R.
, and
Hsia
,
L. M.
,
1994
, “
Instantaneous Invariants and Curvature Analysis of a Planar Four-Link Mechanism
,”
ASME J. Mech. Des.
,
116
(
4
), pp.
1173
–
1176
.
Copyright © 2004
 by ASME
You do not currently have access to this content.