...Khalil Khanafer; Austin Abbasspour; Yasser Aboelkassem In this study, the thermal conductivity of 3D-printed 316L stainless steel parts using the bound metal deposition (BMD) method, an extrusion-based 3D-printing technology, was examined experimentally and validated numerically using finite...

...Majid Baniassadi; Akbar Ghazavizadeh; Yves Rémond; Said Ahzi; David Ruch; Hamid Garmestani In this study, a qualitative equivalence between the electrical percolation threshold and the effective thermal conductivity of composites filled with cylindrical nanofillers has been recognized. The two...

... of the bulk silicon. Furthermore, stress/strain inside microscale silicon structures can significantly affect their thermal properties. This article presents the first thermal conductivity measurements of a microscale silicon structure under applied compressive stress at 350 K. Atomic force microscope (AFM...

... material. It is shown that for EDM machining conditions of 120 V/12 A/ 6 μ s / 30 μ s (discharge voltage/pulse current/pulse-on duration/pulse-off duration), the hole-drilling induced stress reduces with an increasing thermal conductivity ( k ) in accordance with the relation σ cal = 325.5 k − 0.65 MPa...

... temperatures (300 K, 900 K, and 1500 K). Nanocomposite thermal conductivity values predicted in this study are smaller in comparison to the bulk Si 3 N 4 values ( ∼ 30 W / m K ) . Even with the volume fraction of SiC phase being limited to maximum 40%, it is shown that the thermal conductivity values could...

..., and AISI 1045 medium carbon steel. A calibration procedure based on the thermal conductivity of the material is conducted to compensate for the additional compressive stress induced in the workpiece by the EDM hole-drilling operation. Since the formation of this white layer influences the magnitude...

...Y.-B. Yi; C.-W. Wang; A. M. Sastry Increased thermal conductivity, electronic conductivity, and reversible capacity (i.e., reduced irreversible capacity loss, or ICL) have been demonstrably achievable by compression of anodes into higher volume fraction plates, though excessive compression can...