Skip Nav Destination
Issues
July 2019
ISSN 0094-4289
EISSN 1528-8889
In this Issue
Research Papers
Compressibility, Damage, and Age-Hardening Effects of Solid Propellants Using Finite Strain Constitutive Model
J. Eng. Mater. Technol. July 2019, 141(3): 031001.
doi: https://doi.org/10.1115/1.4042661
Topics:
Compressibility
,
Constitutive equations
,
Damage
,
Hardening
,
Propellants
,
Stress
,
Temperature
,
Viscoelasticity
Cold Metal Transfer Welding of AA6061 to AA7075: Mechanical Properties and Corrosion
J. Eng. Mater. Technol. July 2019, 141(3): 031002.
doi: https://doi.org/10.1115/1.4042863
Topics:
Base metals
,
Corrosion
,
Heat
,
Mechanical properties
,
Metals
,
Welding
,
Aluminum alloys
,
Tensile strength
Evaluation of High Strain Rate Characteristics of Metallic Sandwich Specimens
J. Eng. Mater. Technol. July 2019, 141(3): 031003.
doi: https://doi.org/10.1115/1.4042864
Topics:
Aluminum
,
Finite element analysis
,
Friction
,
Simulation
,
Stress
,
Surface roughness
,
Steel
,
Equilibrium (Physics)
,
Compression
,
Metals
Effects of Graphene Oxide Thin Films and Nanocomposite Coatings on Flame Retardancy and Thermal Stability of Aircraft Composites: A Comparative Study
J. Eng. Mater. Technol. July 2019, 141(3): 031004.
doi: https://doi.org/10.1115/1.4042663
Topics:
Coatings
,
Composite materials
,
Flames
,
Graphene
,
Nanocomposites
,
Thin films
,
Nanoclays
,
Epoxy resins
,
Temperature
,
Thermal stability
Experimental Characterization and Finite Element Prediction of Large Strain Spring-Back Behavior of Poly(Methyl Methacrylate)
J. Eng. Mater. Technol. July 2019, 141(3): 031005.
doi: https://doi.org/10.1115/1.4042744
Topics:
Cooling
,
Embossing
,
Springs
,
Stress
,
Temperature
,
Relaxation (Physics)
,
Finite element analysis
,
Simulation
The Effect of Temperature on Puncture Resistance of Glass Cloth Reinforced Polyester Composites
J. Eng. Mater. Technol. July 2019, 141(3): 031006.
doi: https://doi.org/10.1115/1.4042745
Measurements of Through-Thickness Young's Moduli of Fibrous Composite Laminates Using Nanoindentation
J. Eng. Mater. Technol. July 2019, 141(3): 031007.
doi: https://doi.org/10.1115/1.4042746
Topics:
Composite materials
,
Laminates
,
Nanoindentation
,
Young's modulus
,
Fibers
,
Fiber reinforced composites
Effect of Underloads on Plasticity-Induced Crack Closure: A Numerical Analysis
J. Eng. Mater. Technol. July 2019, 141(3): 031008.
doi: https://doi.org/10.1115/1.4042865
Topics:
Fracture (Materials)
,
Stress
,
Plasticity
,
Deformation
Mechanical Characterization and Modeling of Direct Metal Laser Sintered Stainless Steel GP1
J. Eng. Mater. Technol. July 2019, 141(3): 031009.
doi: https://doi.org/10.1115/1.4042867
Topics:
Additive manufacturing
,
Fatigue
,
Fracture (Materials)
,
Fracture (Process)
,
Lasers
,
Metals
,
Modeling
,
Stainless steel
,
Stress
,
Tension
Numerical Investigation of the Origin of Anomalous Tensile Twinning in Magnesium Alloys
J. Eng. Mater. Technol. July 2019, 141(3): 031010.
doi: https://doi.org/10.1115/1.4042868
Topics:
Magnesium alloys
,
Simulation
,
Stress
,
Stress concentration
,
Texture (Materials)
,
Twinning
,
Crystals
,
Plasticity
,
Tension
,
Hardening
Technical Brief
Use of Polymer Scaffolding and Electroplating to Create Porous Metal Structures
J. Eng. Mater. Technol. July 2019, 141(3): 034501.
doi: https://doi.org/10.1115/1.4042660
Topics:
Copper
,
Electroplating
,
Metals
,
Polymers
,
Porous materials
,
Porosity
,
Additive manufacturing
,
Electroforming
,
Scanning electron microscopes
,
Metalwork
Analyses of Constitutive Behavior of As-Cast Aluminum Alloys AA3104, AA5182, and AA6111 During Direct Chill Casting Using Physically Based Models
J. Eng. Mater. Technol. July 2019, 141(3): 034502.
doi: https://doi.org/10.1115/1.4042869
Topics:
Alloys
,
Casting
,
Flow (Dynamics)
,
Stress
,
Temperature
,
Compression
,
Aluminum alloys
,
Wells
,
Cooling
Email alerts
RSS Feeds
Modeling Growth and Viscous Flow of Oxide on Cylindrical Silicon Surfaces Including Piezoviscous Inhibition
J. Eng. Mater. Technol (April 2025)
Thermal Conductivity of 3D-Printed Metal Using Extrusion-Based Metal Additive Manufacturing Process
J. Eng. Mater. Technol (April 2025)