Skip Nav Destination
Issues
January 2016
ISSN 0094-4289
EISSN 1528-8889
In this Issue
Research Papers
Incorporating Density and Temperature in the Stretched Exponential Model for Predicting Stress Relaxation Behavior of Polymer Foams
J. Eng. Mater. Technol. January 2016, 138(1): 011001.
doi: https://doi.org/10.1115/1.4031426
Topics:
Density
,
Relaxation (Physics)
,
Stress
,
Temperature
,
Polymer foams
Experimental Assessment of High Damping Rubber Under Combined Compression and Shear
J. Eng. Mater. Technol. January 2016, 138(1): 011002.
doi: https://doi.org/10.1115/1.4031427
Topics:
Bearings
,
Compression
,
Compressive stress
,
Damping
,
Rubber
,
Shear (Mechanics)
,
Stress
,
Shear modulus
,
Shapes
,
Deformation
Comparison of Static and Dynamic Powder Compaction: Experiment and Simulation
J. Eng. Mater. Technol. January 2016, 138(1): 011003.
doi: https://doi.org/10.1115/1.4031615
Topics:
Compacting
,
Copper
,
Density
,
Engineering simulation
,
Simulation
,
Stress
,
Temperature
,
Pressure
,
Particulate matter
,
Shock (Mechanics)
Predicting the Peen Forming Effectiveness of Ti-6Al-4V Strips With Different Thicknesses Using Realistic Finite Element Simulations
J. Eng. Mater. Technol. January 2016, 138(1): 011004.
doi: https://doi.org/10.1115/1.4031830
Asymmetric Postbuckling Behavior of Hemispherical Shell Structure Under Axial Compression
J. Eng. Mater. Technol. January 2016, 138(1): 011005.
doi: https://doi.org/10.1115/1.4031960
Topics:
Compression
,
Deformation
,
Displacement
,
Hinges
,
Shells
Importance of Bonding Atmosphere for Mechanical Reliability of Reactively Bonded Solder Joints
J. Eng. Mater. Technol. January 2016, 138(1): 011006.
doi: https://doi.org/10.1115/1.4032020
Topics:
Bonding
,
Fracture (Materials)
,
Fracture (Process)
,
Fracture toughness
,
Pressure
,
Reliability
,
Solder joints
,
Solders
,
Stress
,
Vacuum
Effect of Geometrical Discontinuities on Strain Distribution for Orthotropic Laminates Under Biaxial Loading
J. Eng. Mater. Technol. January 2016, 138(1): 011007.
doi: https://doi.org/10.1115/1.4032004
Topics:
Anisotropy
,
Composite materials
,
Failure
,
Fracture (Process)
,
Gages
,
Geometry
,
Laminates
,
Numerical analysis
,
Splines
,
Stress
Technical Brief
Bending Stresses in Triangular Auxetic Plates
J. Eng. Mater. Technol. January 2016, 138(1): 014501.
doi: https://doi.org/10.1115/1.4031665
Topics:
Bending (Stress)
,
Plates (structures)
,
Stress
,
Poisson ratio
Plastic Zone Size at Sharp Indentation of Classical Elastic–Plastic Materials: Behavior at Ideally Plastic Hardening
J. Eng. Mater. Technol. January 2016, 138(1): 014502.
doi: https://doi.org/10.1115/1.4031736
Topics:
Finite element methods
,
Hardening
,
Plastics
,
Numerical analysis
,
Work hardening
,
Mechanical behavior
Email alerts
RSS Feeds
Investigating Microstructure and Wear Characteristics of Alloy Steels Used as Wear Plates in Ballast Cleaning Operation in Railways
J. Eng. Mater. Technol (January 2025)
Active Constrained Layer Damping of Beams With Natural Fiber Reinforced Viscoelastic Composites
J. Eng. Mater. Technol (January 2025)
High-Temperature Fatigue of Additively Manufactured Inconel 718: A Short Review
J. Eng. Mater. Technol (January 2025)
