Volume 121 Issue 3 | J. Eng. Mater. Technol.

Skip Nav Destination

Volume 121, Issue 3

July 1999

ISSN 0094-4289

EISSN 1528-8889

Technical Papers

Dynamic Indentation Hardness and Rate Sensitivity in Metals

G. Subhash, B. J. Koeppel, A. Chandra

J. Eng. Mater. Technol. July 1999, 121(3): 257–263. doi: https://doi.org/10.1115/1.2812373

Abstract

View articletitled, Dynamic Indentation Hardness and Rate Sensitivity in Metals

Open the PDF for in another window

Topics: High speed machining , Metals , Vickers hardness testing , Yield stress

Statistical Modeling of Creep Rupture Data

R. B. Davies, R. Hales, J. C. Harman, S. R. Holdsworth

J. Eng. Mater. Technol. July 1999, 121(3): 264–271. doi: https://doi.org/10.1115/1.2812374

Abstract

View articletitled, Statistical Modeling of Creep Rupture Data

Open the PDF for in another window

Topics: Creep , Modeling , Rupture , Clearances (Engineering) , Failure , Reliability

Nonlinear Properties of High Strength Paperboards

Y. P. Qiu, M. Millan, C. H. Lin, T. D. Gerhardt

J. Eng. Mater. Technol. July 1999, 121(3): 272–277. doi: https://doi.org/10.1115/1.2812375

Abstract

View articletitled, Nonlinear Properties of High Strength Paperboards

Open the PDF for in another window

Topics: Anisotropy , Compression , Deformation , Laminates , Materials properties , Shear (Mechanics) , Solid mechanics , Stress

Fatigue Damage Initiation in Waspaloy Under Complex Cyclic Loading

A. Abdul-Latif, V. Ferney, K. Saanouni

J. Eng. Mater. Technol. July 1999, 121(3): 278–285. doi: https://doi.org/10.1115/1.2812376

Abstract

View articletitled, Fatigue Damage Initiation in Waspaloy Under Complex Cyclic Loading

Open the PDF for in another window

Topics: Damage , Fatigue damage , Low cycle fatigue

Multiaxial Fatigue Under Variable Amplitude Loads

K. S. Kim, J. C. Park, J. W. Lee

J. Eng. Mater. Technol. July 1999, 121(3): 286–293. doi: https://doi.org/10.1115/1.2812377

Abstract

View articletitled, Multiaxial Fatigue Under Variable Amplitude Loads

Open the PDF for in another window

Topics: Fatigue , Stress , Damage , Computation , Cycles , Shear (Mechanics) , Fatigue life , Torsion , Steel , Tension

Quantitative Prediction of Impact Forces In Elastomers

Suresh Goyal, Ronald G. Larson, Charles J. Aloisio

J. Eng. Mater. Technol. July 1999, 121(3): 294–304. doi: https://doi.org/10.1115/1.2812378

Abstract

View articletitled, Quantitative Prediction of Impact Forces In Elastomers

Open the PDF for in another window

Topics: Elastomers , Deflection , Deformation , Design , Electronic equipment , Solids , Temperature , Urethane elastomers

Fatigue Life Parameter for Type 304 Stainless Steel Under Biaxial-Tensile Loading at Elevated Temperature

Abdelkrim Zouani, Thang Bui-Quoc, Marie Bernard

J. Eng. Mater. Technol. July 1999, 121(3): 305–312. doi: https://doi.org/10.1115/1.2812379

Abstract

View articletitled, Fatigue Life Parameter for Type 304 Stainless Steel Under Biaxial-Tensile Loading at Elevated Temperature

Open the PDF for in another window

Topics: Fatigue life , Stainless steel , Temperature , Stress , Disks , Fatigue , Testing , Damage , Fatigue testing , Machinery

A Method for Determining the Elastic-Plastic Response Ahead of a Notch Tip

C. H. Wang, W. Guo, L. R. F. Rose

J. Eng. Mater. Technol. July 1999, 121(3): 313–320. doi: https://doi.org/10.1115/1.2812380

Abstract

View articletitled, A Method for Determining the Elastic-Plastic Response Ahead of a Notch Tip

Open the PDF for in another window

Topics: Deformation , Finite element analysis , Fracture (Materials) , Plasticity , Stress , Stress concentration

Fatigue Crack Growth Rate Characteristics of Laser Shock Peened Ti-6Al-4V

John J. Ruschau, Reji John, Steven R. Thompson, Theodore Nicholas

J. Eng. Mater. Technol. July 1999, 121(3): 321–329. doi: https://doi.org/10.1115/1.2812381

Abstract

View articletitled, Fatigue Crack Growth Rate Characteristics of Laser Shock Peened Ti-6Al-4V

Open the PDF for in another window

Topics: Fatigue cracks , Lasers , Shock (Mechanics) , Laser hardening , Stress , Compressive stress , Damage , Fracture (Materials) , Titanium

Numerical Modeling of Resistance Brazing Process Behavior in Joining Electrical Contact Materials

A. Sherif El-Gizawy, Randall A. Wood

J. Eng. Mater. Technol. July 1999, 121(3): 330–335. doi: https://doi.org/10.1115/1.2812382

Abstract

View articletitled, Numerical Modeling of Resistance Brazing Process Behavior in Joining Electrical Contact Materials

Open the PDF for in another window

Topics: Brazing , Computer simulation , Joining , Transients (Dynamics) , Approximation , Convection , Cooling , Copper , Electrodes , Finite difference methods

Characterization of a Water Peening Process

S. R. Daniewicz, S. D. Cummings

J. Eng. Mater. Technol. July 1999, 121(3): 336–340. doi: https://doi.org/10.1115/1.2812383

Abstract

View articletitled, Characterization of a Water Peening Process

Open the PDF for in another window

Topics: Shot peening , Water , Residual stresses , Aluminum , Compressive stress , Deformation , Finite element analysis , Modeling , Stress , Surface roughness

Optimum Forming Loading Paths for Pb-Sn Superplastic Sheet Materials

Marwan K. Khraisheh, Hussein M. Zbib

J. Eng. Mater. Technol. July 1999, 121(3): 341–345. doi: https://doi.org/10.1115/1.2812384

Abstract

View articletitled, Optimum Forming Loading Paths for Pb-Sn Superplastic Sheet Materials

Open the PDF for in another window

Topics: Sheet materials , Superplasticity , Tin , Pressure , Deformation , Failure , Hardening

Residual Stresses and Surface Roughness in Turning

Edoardo Capello, Piermaria Davoli, Gianluca Bassanini, Alessandro Bisi

J. Eng. Mater. Technol. July 1999, 121(3): 346–351. doi: https://doi.org/10.1115/1.2812385

Abstract

View articletitled, Residual Stresses and Surface Roughness in Turning

Open the PDF for in another window

Topics: Residual stresses , Surface roughness , Turning , Fatigue , Cutting , Finishes , Machining , Steel

Strip Yield Analysis on Coalescence of Plastic Zones for Multiple Cracks in a Riveted Stiffened Sheet

Toshihiko Nishimura

J. Eng. Mater. Technol. July 1999, 121(3): 352–359. doi: https://doi.org/10.1115/1.2812386

Abstract

View articletitled, Strip Yield Analysis on Coalescence of Plastic Zones for Multiple Cracks in a Riveted Stiffened Sheet

Open the PDF for in another window

Topics: Fracture (Materials) , Strips , Algebra , Displacement , Fasteners , Stress , Stress singularity

A Micromechanics-Based Finite Element Model for Compressive Failure of Notched Uniply Composite Laminates Under Remote Biaxial Loads

Jung H. Ahn, Anthony M. Waas

J. Eng. Mater. Technol. July 1999, 121(3): 360–366. doi: https://doi.org/10.1115/1.2812387

Abstract

View articletitled, A Micromechanics-Based Finite Element Model for Compressive Failure of Notched Uniply Composite Laminates Under Remote Biaxial Loads

Open the PDF for in another window

Topics: Composite materials , Failure , Finite element model , Laminates , Micromechanics (Engineering) , Stress , Finite element methods , Compression , Fibers , Failure mechanisms

Theoretical and Experimental Evaluation of Double-Notch Shear Strength of G-10CR Glass-Cloth/Epoxy Laminates at Cryogenic Temperatures

Y. Shindo, R. Wang, K. Horiguchi, S. Ueda

J. Eng. Mater. Technol. July 1999, 121(3): 367–373. doi: https://doi.org/10.1115/1.2812388

Abstract

View articletitled, Theoretical and Experimental Evaluation of Double-Notch Shear Strength of G-10CR Glass-Cloth/Epoxy Laminates at Cryogenic Temperatures

Open the PDF for in another window

Topics: Epoxy adhesives , Epoxy resins , Glass , Laminates , Shear strength , Temperature , Textiles , Shear (Mechanics) , Fracture (Materials) , Fracture (Process)

Stress-Strain Analysis of a Taper-Taper Adhesive-Bonded Joint Under Cylindrical Bending

Jack E. Helms, Chihdar Yang, Su-Seng Pang

J. Eng. Mater. Technol. July 1999, 121(3): 374–380. doi: https://doi.org/10.1115/1.2812389

Abstract

View articletitled, Stress-Strain Analysis of a Taper-Taper Adhesive-Bonded Joint Under Cylindrical Bending

Open the PDF for in another window

Topics: Adhesives , Stress , Finite element model , Differential equations , Finite element analysis , FORTRAN , Laminates , Plate theory , Shear (Mechanics) , Shear deformation

Delamination Growth Behavior of a Fabric Reinforced Laminated Composite Under Mode I Fatigue

D. R. Atodaria, S. K. Putatunda, P. K. Mallick

J. Eng. Mater. Technol. July 1999, 121(3): 381–385. doi: https://doi.org/10.1115/1.2812390

Abstract

View articletitled, Delamination Growth Behavior of a Fabric Reinforced Laminated Composite Under Mode I Fatigue

Open the PDF for in another window

Topics: Composite materials , Delamination , Fatigue , Textiles , Stress , Tension , Fatigue cracks , Glass , Weight (Mass)

Computer Simulation of 3-D Random Distribution of Short Fibers in Metal Matrix Composite Materials

Jiang Xiaoyu, Kong Xiangan

J. Eng. Mater. Technol. July 1999, 121(3): 386–392. doi: https://doi.org/10.1115/1.2812391

Abstract

View articletitled, Computer Simulation of 3-D Random Distribution of Short Fibers in Metal Matrix Composite Materials

Open the PDF for in another window

Topics: Computer simulation , Fibers , Metal matrix composites , Composite materials , Computers , Fiber reinforced composites , Simulation

Effect of Wrought Product Thickness and Stress Ratio on Fatigue Crack Growth Behavior of a Quaternary Aluminium-Lithium Alloy

Vikas Kumar Saxena, V. M. Radhakrishnan

J. Eng. Mater. Technol. July 1999, 121(3): 393–398. doi: https://doi.org/10.1115/1.2812392

Abstract

View articletitled, Effect of Wrought Product Thickness and Stress Ratio on Fatigue Crack Growth Behavior of a Quaternary Aluminium-Lithium Alloy

Open the PDF for in another window

Topics: Alloys , Aluminum , Fatigue cracks , Lithium , Stress , Fracture (Materials) , Plane strain , Surface roughness

Technical Brief

Estimating the Location and Depth of Normal Cracks in Cantilevers From Holographic Fringe Patterns

S. Qin, H. M. Shang, Q. H. Leong, C. E. Tee

J. Eng. Mater. Technol. July 1999, 121(3): 399–401. doi: https://doi.org/10.1115/1.2812393

Abstract

View articletitled, Estimating the Location and Depth of Normal Cracks in Cantilevers From Holographic Fringe Patterns

Open the PDF for in another window

Topics: Cantilevers , Diffraction patterns , Fracture (Materials)

Technical Papers

Dynamic Indentation Hardness and Rate Sensitivity in Metals

Statistical Modeling of Creep Rupture Data

Nonlinear Properties of High Strength Paperboards

Fatigue Damage Initiation in Waspaloy Under Complex Cyclic Loading

Multiaxial Fatigue Under Variable Amplitude Loads

Quantitative Prediction of Impact Forces In Elastomers

Fatigue Life Parameter for Type 304 Stainless Steel Under Biaxial-Tensile Loading at Elevated Temperature

A Method for Determining the Elastic-Plastic Response Ahead of a Notch Tip

Fatigue Crack Growth Rate Characteristics of Laser Shock Peened Ti-6Al-4V

Numerical Modeling of Resistance Brazing Process Behavior in Joining Electrical Contact Materials

Characterization of a Water Peening Process

Optimum Forming Loading Paths for Pb-Sn Superplastic Sheet Materials

Residual Stresses and Surface Roughness in Turning

Strip Yield Analysis on Coalescence of Plastic Zones for Multiple Cracks in a Riveted Stiffened Sheet

A Micromechanics-Based Finite Element Model for Compressive Failure of Notched Uniply Composite Laminates Under Remote Biaxial Loads

Theoretical and Experimental Evaluation of Double-Notch Shear Strength of G-10CR Glass-Cloth/Epoxy Laminates at Cryogenic Temperatures

Stress-Strain Analysis of a Taper-Taper Adhesive-Bonded Joint Under Cylindrical Bending

Delamination Growth Behavior of a Fabric Reinforced Laminated Composite Under Mode I Fatigue

Computer Simulation of 3-D Random Distribution of Short Fibers in Metal Matrix Composite Materials

Effect of Wrought Product Thickness and Stress Ratio on Fatigue Crack Growth Behavior of a Quaternary Aluminium-Lithium Alloy

Technical Brief

Estimating the Location and Depth of Normal Cracks in Cantilevers From Holographic Fringe Patterns

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Technical Brief

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only