An effective procedure is presented that allows stable hole-drilling residual stress calculations using strain data from measurements taken at many small increments of hole depth. This use of many strain measurements is desirable because it improves the data content of the calculation, and the statistical reliability of the residual stress results. The use of Tikhonov regularization to reduce the noise sensitivity that is characteristic of a fine-increment calculation is described. This mathematical procedure is combined with the Morozov criterion to identify the optimal amount of regularization that balances the competing tendencies of noise reduction and stress solution distortion. A simple method is described to estimate the standard error in the strain measurements so that the optimal regularization can be chosen automatically. The possible use of a priori information about the trend of the expected solution is also discussed as a further means of improving the stress solution. The application of the described method is demonstrated with some experimental measurements, and realistic results are obtained.
Skip Nav Destination
Article navigation
July 2007
Technical Papers
Hole-Drilling Residual Stress Profiling With Automated Smoothing
Gary S. Schajer
Gary S. Schajer
Professor
Fellow ASME
Department of Mechanical Engineering,
University of British Columbia
, Vancouver, Canada V6T 1Z4
Search for other works by this author on:
Gary S. Schajer
Professor
Fellow ASME
Department of Mechanical Engineering,
University of British Columbia
, Vancouver, Canada V6T 1Z4J. Eng. Mater. Technol. Jul 2007, 129(3): 440-445 (6 pages)
Published Online: March 28, 2007
Article history
Received:
June 12, 2006
Revised:
March 28, 2007
Citation
Schajer, G. S. (March 28, 2007). "Hole-Drilling Residual Stress Profiling With Automated Smoothing." ASME. J. Eng. Mater. Technol. July 2007; 129(3): 440–445. https://doi.org/10.1115/1.2744416
Download citation file:
Get Email Alerts
Modeling Growth and Viscous Flow of Oxide on Cylindrical Silicon Surfaces Including Piezoviscous Inhibition
J. Eng. Mater. Technol (April 2025)
Thermal Conductivity of 3D-Printed Metal Using Extrusion-Based Metal Additive Manufacturing Process
J. Eng. Mater. Technol (April 2025)
Related Articles
A New Analytical Approach for Hole Drilling Residual Stress Analysis by Full Field Method
J. Eng. Mater. Technol (April,2005)
Local Stress-Ratio Criterion for Incremental Hole-Drilling Measurements of Shot-Peening Stresses
J. Eng. Mater. Technol (April,2006)
Hole-Within-a-Hole Method for Determining Residual Stresses
J. Eng. Mater. Technol (April,2011)
On the Improvement of Calibration Coefficients for Hole-Drilling Integral Method: Part II—Experimental Validation of Calibration Coefficients
J. Eng. Mater. Technol (April,2003)
Related Proceedings Papers
Related Chapters
Limiting Constituent Criteria
Guidebook for Waste and Soil Remediation: For Nonhazardous Petroleum and Salt Contaminated Sites
Clean Closure Techniques
Guidebook for Waste and Soil Remediation: For Nonhazardous Petroleum and Salt Contaminated Sites
Application of Seismic Sedimentology in Analysis on Channel Sedimentary Facies
International Conference on Advanced Computer Theory and Engineering, 5th (ICACTE 2012)