Skip Nav Destination
Issues
June 2008
ISSN 1087-1357
EISSN 1528-8935
Editorial
Editorial
J. Manuf. Sci. Eng. June 2008, 130(3): 030201.
doi: https://doi.org/10.1115/1.2944273
Topics:
Micromanufacturing
Research Papers
An Adaptive Fuzzy Controller for Constant Cutting Force in End-Milling Processes
J. Manuf. Sci. Eng. June 2008, 130(3): 031001.
doi: https://doi.org/10.1115/1.2823070
Topics:
Control equipment
,
Cutting
,
Milling
,
Fuzzy control
,
Simulation
Parallel Turning Process Parameter Optimization Based on a Novel Heuristic Approach
J. Manuf. Sci. Eng. June 2008, 130(3): 031002.
doi: https://doi.org/10.1115/1.2823077
Topics:
Algorithms
,
Machining
,
Optimization
,
Turning
,
Particle swarm optimization
Geometry Control of the Deposited Layer in a Nonplanar Laser Cladding Process Using a Variable Structure Controller
J. Manuf. Sci. Eng. June 2008, 130(3): 031003.
doi: https://doi.org/10.1115/1.2823085
An Efficient, Accurate Approach to Representing Cutter-Swept Envelopes and Its Applications to Three-Axis Virtual Milling of Sculptured Surfaces
J. Manuf. Sci. Eng. June 2008, 130(3): 031004.
doi: https://doi.org/10.1115/1.2823218
Topics:
Cutting
,
Errors
,
Machining
,
Milling
,
Optimization
Three Dimensional Analysis of High Frequency Induction Welding of Steel Pipes With Impeder
J. Manuf. Sci. Eng. June 2008, 130(3): 031005.
doi: https://doi.org/10.1115/1.2844586
Directionally Independent Failure Prediction of End-Milling Tools by Tracking Increasing Chaotic Noise at the Machining Frequencies Due to Wear
J. Manuf. Sci. Eng. June 2008, 130(3): 031006.
doi: https://doi.org/10.1115/1.2844589
Topics:
Algorithms
,
Failure
,
Machining
,
Milling
,
Noise (Sound)
,
Wear
Variation Source Identification in Manufacturing Processes Based on Relational Measurements of Key Product Characteristics
J. Manuf. Sci. Eng. June 2008, 130(3): 031007.
doi: https://doi.org/10.1115/1.2844591
Topics:
Dimensions
,
Manufacturing
,
Noise (Sound)
,
Probability
,
Density
,
Robustness
,
Quality control
Novel Laser/Water-Jet Hybrid Manufacturing Process for Cutting Ceramics
J. Manuf. Sci. Eng. June 2008, 130(3): 031008.
doi: https://doi.org/10.1115/1.2844592
Topics:
Ceramics
,
Cutting
,
Fracture (Materials)
,
Lasers
,
Water
,
Laser cutting
,
Manufacturing
,
Aluminum
,
Machining
,
Slags
Networked Fuzzy Control System for a High-Performance Drilling Process
J. Manuf. Sci. Eng. June 2008, 130(3): 031009.
doi: https://doi.org/10.1115/1.2783280
Topics:
Control equipment
,
Cutting
,
Drilling
,
Fuzzy control
,
Delays
Estimating Distributions of Surface Parameters for Classification Purposes
J. Manuf. Sci. Eng. June 2008, 130(3): 031010.
doi: https://doi.org/10.1115/1.2844588
Topics:
Errors
,
Filters
,
Filtration
Dynamics Modeling and Analysis of Thin-Walled Aerospace Structures for Fixture Design in Multiaxis Milling
J. Manuf. Sci. Eng. June 2008, 130(3): 031011.
doi: https://doi.org/10.1115/1.2927444
Topics:
Aerospace industry
,
Calibration
,
Cutting
,
Design
,
Dynamic response
,
Dynamics (Mechanics)
,
Errors
,
Finite element model
,
Machining
,
Milling
Mechanism and Prediction of Laser Wet Cleaning of Marble Encrustation
J. Manuf. Sci. Eng. June 2008, 130(3): 031012.
doi: https://doi.org/10.1115/1.2927446
Topics:
Incrustations
,
Lasers
,
Pressure
,
Temperature
,
Water
,
Fluence (Radiation measurement)
Laser-Assisted Milling of Silicon Nitride Ceramics and Inconel 718
J. Manuf. Sci. Eng. June 2008, 130(3): 031013.
doi: https://doi.org/10.1115/1.2927447
Topics:
Cutting
,
Lasers
,
Machining
,
Milling
,
Silicon nitride ceramics
,
Temperature
,
Wear
,
Temperature measurement
,
Cutting tools
Automated Sensor Selection and Fusion for Monitoring and Diagnostics of Plunge Grinding
J. Manuf. Sci. Eng. June 2008, 130(3): 031014.
doi: https://doi.org/10.1115/1.2927439
Topics:
Chatter
,
Grinding
,
Sensors
,
Wear
,
Wheels
,
Feature selection
,
Process monitoring
,
Algorithms
,
Errors
Special Section: Micromanufacturing
An Acoustic Emission-Based Method for Determining Contact Between a Tool and Workpiece at the Microscale
J. Manuf. Sci. Eng. June 2008, 130(3): 031101.
doi: https://doi.org/10.1115/1.2917285
Topics:
Acoustics
,
Emissions
,
Geometry
,
Microscale devices
,
Surface roughness
,
Simulation
,
Errors
,
Machine tools
,
Wear
,
Damage
A Mechanistic Model of Cutting Forces in Micro-End-Milling With Cutting-Condition-Independent Cutting Force Coefficients
J. Manuf. Sci. Eng. June 2008, 130(3): 031102.
doi: https://doi.org/10.1115/1.2917300
Fabrication of High Aspect Ratio Porous Microfeatures Using Hot Compaction Technique
J. Manuf. Sci. Eng. June 2008, 130(3): 031103.
doi: https://doi.org/10.1115/1.2917308
Topics:
Compacting
,
Manufacturing
,
Temperature
,
Porosity
,
Heat transfer
,
Sintering
,
Temperature distribution
Design, Fabrication, and Characterization of Metal Embedded Microphotonic Sensors
J. Manuf. Sci. Eng. June 2008, 130(3): 031104.
doi: https://doi.org/10.1115/1.2917356
Topics:
Design
,
Manufacturing
,
Metals
,
Sensors
,
Temperature
,
Waveguides
Mechanical Properties and Microstructure of Nanocomposites Fabricated by Ultrasonic Cavitation Based Nanomanufacturing
J. Manuf. Sci. Eng. June 2008, 130(3): 031105.
doi: https://doi.org/10.1115/1.2823086
Model-Based Pulse Frequency Control for Micro-EDM Milling Using Real-Time Discharge Pulse Monitoring
J. Manuf. Sci. Eng. June 2008, 130(3): 031106.
doi: https://doi.org/10.1115/1.2917305
Topics:
Electrical discharge machining
,
Electrodes
,
Machining
,
Milling
,
Process control
,
Wear
Development of Spherical Magnetic Abrasive Made by Plasma Spray
J. Manuf. Sci. Eng. June 2008, 130(3): 031107.
doi: https://doi.org/10.1115/1.2917353
Topics:
Finishing
,
Particulate matter
,
Plasmas (Ionized gases)
,
Sprays
,
Iron
Calibration of Palletized Workpiece Systems for Microfactories
J. Manuf. Sci. Eng. June 2008, 130(3): 031108.
doi: https://doi.org/10.1115/1.2917289
Topics:
Calibration
,
Couplings
,
Errors
,
Kinematics
,
Machinery
,
Pallets
An Experimental Investigation of the Feasibility of “Self-Sensing” Shape Memory Alloy Based Actuators
J. Manuf. Sci. Eng. June 2008, 130(3): 031109.
doi: https://doi.org/10.1115/1.2917294
Topics:
Actuators
,
Displacement
,
Wire
,
Temperature
A Microstructure-Level Material Model for Simulating the Machining of Carbon Nanotube Reinforced Polymer Composites
J. Manuf. Sci. Eng. June 2008, 130(3): 031110.
doi: https://doi.org/10.1115/1.2917564
Topics:
Carbon nanotubes
,
Composite materials
,
Machining
,
Simulation
,
Polymers
,
Model validation
,
Compression
Laser Ablation of Metals: A 3D Process Simulation for Industrial Applications
J. Manuf. Sci. Eng. June 2008, 130(3): 031111.
doi: https://doi.org/10.1115/1.2917326
Topics:
Laser ablation
,
Lasers
,
Plasmas (Ionized gases)
,
Plumes (Fluid dynamics)
,
Simulation
,
Temperature
,
Metals
,
Milling
,
Power density
,
Density
A Submicron Multiaxis Positioning Stage for Micro- and Nanoscale Manufacturing Processes
J. Manuf. Sci. Eng. June 2008, 130(3): 031112.
doi: https://doi.org/10.1115/1.2917315
Gap Adjustable Molten Metal DoD Inkjet System With Cone-Shaped Piston Head
Taik-Min Lee, Tae Goo Kang, Jeong Soon Yang, Jeongdai Jo, Kwang-Young Kim, Byung-Oh Choi, Dong-Soo Kim
J. Manuf. Sci. Eng. June 2008, 130(3): 031113.
doi: https://doi.org/10.1115/1.2917367
Topics:
Drops
,
Metals
,
Nozzles
,
Pistons
,
US Department of Defense
,
Piezoelectric actuators
,
Solders
,
Furnaces
,
Temperature
Microstructure-Level Machining Simulation of Carbon Nanotube Reinforced Polymer Composites—Part I: Model Development and Validation
J. Manuf. Sci. Eng. June 2008, 130(3): 031114.
doi: https://doi.org/10.1115/1.2917378
Topics:
Carbon nanotubes
,
Failure
,
Machining
,
Simulation
,
Composite materials
Microstructure-Level Machining Simulation of Carbon Nanotube Reinforced Polymer Composites—Part II: Model Interpretation and Application
J. Manuf. Sci. Eng. June 2008, 130(3): 031115.
doi: https://doi.org/10.1115/1.2927431
Topics:
Carbon nanotubes
,
Composite materials
,
Cutting
,
Machining
,
Polymers
,
Simulation
Effects of Crystallographic Anistropy on Orthogonal Micromachining of Single-Crystal Aluminum
J. Manuf. Sci. Eng. June 2008, 130(3): 031116.
doi: https://doi.org/10.1115/1.2917268
Topics:
Aluminum
,
Crystals
,
Cutting
,
Friction
,
Micromachining
,
Shear (Mechanics)
,
Shear stress
Micromachining Characteristics of NiTi Based Shape Memory Alloy Using Femtosecond Laser
J. Manuf. Sci. Eng. June 2008, 130(3): 031117.
doi: https://doi.org/10.1115/1.2936380
An Experimental Evaluation of an Atomization-Based Cutting Fluid Application System for Micromachining
J. Manuf. Sci. Eng. June 2008, 130(3): 031118.
doi: https://doi.org/10.1115/1.2738961
Microendmill Dynamics Including the Actual Fluted Geometry and Setup Errors—Part I: Model Development and Numerical Solution
J. Manuf. Sci. Eng. June 2008, 130(3): 031119.
doi: https://doi.org/10.1115/1.2917321
Microendmill Dynamics Including the Actual Fluted Geometry and Setup Errors—Part II: Model Validation and Application
J. Manuf. Sci. Eng. June 2008, 130(3): 031120.
doi: https://doi.org/10.1115/1.2936379
Topics:
Dynamics (Mechanics)
,
Errors
,
Finite element model
,
Geometry
,
Mode shapes
,
Blanks
,
Finite element analysis
,
Boundary-value problems
,
Excitation
Intelligent Tool-Path Segmentation for Improved Stability and Reduced Machining Time in Micromilling
J. Manuf. Sci. Eng. June 2008, 130(3): 031121.
doi: https://doi.org/10.1115/1.2931492
Topics:
Errors
,
Image segmentation
,
Interpolation
,
Optimization
,
Stability
,
Machining
,
Microscale devices
,
Micromilling
Technical Briefs
Development of Cutting Tool With Built-In Thin Film Thermocouples for Measuring High Temperature Fields in Metal Cutting Processes
J. Manuf. Sci. Eng. June 2008, 130(3): 034501.
doi: https://doi.org/10.1115/1.2823066
Modeling of Material Removal Rate in Micro-ECG Process
J. Manuf. Sci. Eng. June 2008, 130(3): 034502.
doi: https://doi.org/10.1115/1.2844587
Topics:
Abrasion
,
Computational fluid dynamics
,
Electrolytes
,
Flow (Dynamics)
,
Grinding
,
Grinding wheels
,
Machining
,
Modeling
,
Simulation
,
Micromachining
Density Measurement of Powder Metallurgy Compacts by Means of Small Indentation
J. Manuf. Sci. Eng. June 2008, 130(3): 034503.
doi: https://doi.org/10.1115/1.2927441
Topics:
Density
,
Powder metallurgy
,
Compacting
,
Pressure
,
Stress
,
Packing (Shipments)
,
Packings (Cushioning)
The Experimental Study on Improved Polishing Method for Terminating Optical Connector
J. Manuf. Sci. Eng. June 2008, 130(3): 034504.
doi: https://doi.org/10.1115/1.2927438
Book Reviews
Precision Spindle Metrology
J. Manuf. Sci. Eng. June 2008, 130(3): 036501.
doi: https://doi.org/10.1115/1.2944274
Topics:
Metrology
Precision Spindle Metrology
J. Manuf. Sci. Eng. June 2008, 130(3): 036502.
doi: https://doi.org/10.1115/1.2944275
Email alerts
RSS Feeds
A REVIEW OF ADVANCED ROLL-TO-ROLL MANUFACTURING: SYSTEM MODELING AND CONTROL
J. Manuf. Sci. Eng
Fatigue Scattering Analytics and Prediction of SS 316L Fabricated by Laser Powder Bed Fusion
J. Manuf. Sci. Eng (February 2025)