Graphical Abstract Figure
Abstract
In this work, a large-scale, high-viscosity vat photopolymerization additive manufacturing system is designed and fabricated to print 3D structures as large as 370 × 300 × 370 mm3 out of high-viscosity, low-reactivity elastomeric resins. A detailed overview is presented of the printer's design and capabilities, including a resin processing sub-system that stores and spreads high-viscosity resin; a roll-to-roll variable tensioning system to mitigate the separation forces after printing each layer; and a light patterning system that generates high-intensity light patterns across an area of 370 × 300 mm2 with a resolution of 3840 × 4320 pixels. The ability to print with both high-viscosity and low-reactivity resins and resins that require high-intensity light enables additive manufacturing of new classes of materials that could not be printed previously using vat photopolymerization techniques. These materials include highly reinforced silica nanoparticle composites, high-molecular-weight polymers such as silicones and acrylate or methacrylate resins, and low-reactivity resins such as photocurable platinum-catalyzed liquid silicone rubber.
References
1.
Hull
, C. W.
, 1986
, “Apparatus for Production of Three-Dimensional Objects by Stereolithography,” US Patent 4,575,330.2.
3D_Systems
, 2019
, “Stereolithography Printers,” https://www.3dsystems.com/sites/default/files/2019-12/3d-systems-SLA-brochure-usen-2019-11-15-web.pdf3.
Bertsch
, A.
, Zissi
, S.
, Jezequel
, J. Y.
, Corbel
, S.
, and Andre
, J. C.
, 1997
, “Microstereophotolithography Using a Liquid Crystal Display as Dynamic Mask-Generator
,” Microsyst. Technol.
, 3
(2
), pp. 42
–47
. 4.
Chatwin
, C.
, Farsari
, M.
, Huang
, S.
, Heywood
, M.
, Birch
, P.
, Young
, R.
, and Richardson
, J.
, 1998
, “UV Microstereolithography System That Uses Spatial Light Modulator Technology
,” Appl. Opt.
, 37
(32
), pp. 7514
–7522
. 5.
Monneret
, S.
, Le Gall
, H.
, Badé
, V.
, Devaux
, F.
, Mosset
, A.
, and Lantz
, E.
, 2002
, “Dynamic UV Microstereolithography
,” Eur. Phys. J. Appl. Phys.
, 20
(3
), pp. 213
–218
. 6.
Choi
, J.-W.
, Irwin
, M. D.
, and Wicker
, R. B.
, 2010
, “DMD-Based 3D Micro-Manufacturing
,” Paper Presented at the Emerging Digital Micromirror Device Based Systems and Applications II
, San Francisco, CA
, Jan. 27
.7.
Hadipoespito
, G. W.
, Yang
, Y.
, Choi
, H.
, Ning
, G.
, and Li
, X.
, 2003
, “Digital Micromirror Device Based Microstereolithography for Micro Structures of Transparent Photopolymer and Nanocomposites
,” Paper Presented at the 2002 International Solid Freeform Fabrication Symposium
, Austin, TX
, Aug. 5
.8.
Limaye
, A.
, and Rosen
, D.
, 2004
, “Quantifying Dimensional Accuracy of a Mask Projection Micro Stereolithography System
,” Paper Presented at the 2004 International Solid Freeform Fabrication Symposium
, Austin, TX
, Aug. 2
.9.
Sun
, C.
, Fang
, N.
, Wu
, D.
, and Zhang
, X.
, 2005
, “Projection Micro-stereolithography Using Digital Micro-mirror Dynamic Mask
,” Sens. Actuators A
, 121
(1
), pp. 113
–120
. 10.
Takahashi
, K.
, and Setoyama
, J.
, 2000
, “A UV-Exposure System Using DMD
,” Electron. Commun. Jpn. (Part II: Electronics)
, 83
(7
), pp. 56
–58
. 11.
Lin
, D.-Z.
, Yu
, P.-H.
, Zhang
, Z.-J.
, Chen
, Y.-C.
, Lin
, S.-C.
, and Jeng
, J.-Y.
, 2023
, “Design and Fabrication of Large Area Vat Photopolymerization 3D Printing System Using a 32-Inch Quasi-Collimated Visible Backlight Module With Local Dimming Control
,” Addit. Manuf.
, 73
, p. 103665
. 12.
Carbon3D
, 2022
, “Carbon EPU 41 Technical Data Sheet,” https://docs.carbon3d.com/files/technical-data-sheets/tds_carbon_epu-41.pdf13.
Formlabs
, 2019
, “Technical Data Sheet: Formlabs Standard Resin, PU Rigid 650,” https://formlabs-media.formlabs.com/datasheets/2201671-TDS-ENUS-0.pdf14.
Boubakri
, A.
, Guermazi
, N.
, Elleuch
, K.
, and Ayedi
, H.
, 2010
, “Study of UV-Aging of Thermoplastic Polyurethane Material
,” Mater. Sci. Eng.: A
, 527
(7–8
), pp. 1649
–1654
. 15.
Tcharkhtchi
, A.
, Farzaneh
, S.
, Abdallah-Elhirtsi
, S.
, Esmaeillou
, B.
, Nony
, F.
, and Baron
, A.
, 2014
, “Thermal Aging Effect on Mechanical Properties of Polyurethane
,” Int. J. Polym. Anal. Charact.
, 19
(7
), pp. 571
–584
. 16.
Lukin
, R. Y.
, Kuchkaev
, A. M.
, Sukhov
, A. V.
, Bekmukhamedov
, G. E.
, and Yakhvarov
, D. G. J. P.
, 2020
, “Platinum-Catalyzed Hydrosilylation in Polymer Chemistry
,” Polymers
, 12
(10
), p. 2174
. 17.
Mazurek
, P.
, Vudayagiri
, S.
, and Skov
, A. L.
, 2019
, “How to Tailor Flexible Silicone Elastomers With Mechanical Integrity: A Tutorial Review
,” Chem. Soc. Rev.
, 48
(6
), pp. 1448
–1464
. 18.
Strohmeier
, L.
, Frommwald
, H.
, and Schlögl
, S.
, 2020
, “Digital Light Processing 3D Printing of Modified Liquid Isoprene Rubber Using Thiol-Click Chemistry
,” RSC Adv.
, 10
(40
), pp. 23607
–23614
. 19.
Bhattacharjee
, N.
, Parra-Cabrera
, C.
, Kim
, Y. T.
, Kuo
, A. P.
, and Folch
, A.
, 2018
, “Desktop-Stereolithography 3D-Printing of a Poly (Dimethylsiloxane)-Based Material With Sylgard-184 Properties
,” Adv. Mater.
, 30
(22
), p. 1800001
. 20.
Wallin
, T. J.
, Pikul
, J. H.
, Bodkhe
, S.
, Peele
, B. N.
, Mac Murray
, B. C.
, Therriault
, D.
, McEnerney
, B. W.
, Dillon
, R. P.
, Giannelis
, E. P.
, and Shepherd
, R.
, 2017
, “Click Chemistry Stereolithography for Soft Robots That Self-heal
,” J. Mater. Chem. B
, 5
(31
), pp. 6249
–6255
. 21.
Wallin
, T. J.
, Simonsen
, L.-E.
, Pan
, W.
, Wang
, K.
, Giannelis
, E.
, Shepherd
, R. F.
, and Mengüç
, Y.
, 2020
, “3D Printable Tough Silicone Double Networks
,” Nat. Commun.
, 11
(1
), pp. 1
–10
. 22.
Song
, H.
, Rodriguez
, N. A.
, Okadale
, J. S.
, Duoss
, E. B.
, Crawford
, R. H.
, and Seepersad
, C. C.
, 2022
, “Aging of UV Curable PDMS Developed for Large-Scale, High Viscosity Stereolithography
,” Polym. Degrad. Stab.
, 207
, p. 110227
. 23.
Bhagat
, A. A.
, Jothimuthu
, P.
, and Papautsky
, I.
, 2007
, “Photodefinable Polydimethylsiloxane (PDMS) for Rapid Lab-on-a-Chip Prototyping
,” Lab Chip
, 7
(9
), pp. 1192
–1197
. 24.
Hayashi
, T.
, and Yamasaki
, K.
, 2007
, “C–E Bond Formation Through Asymmetric Hydrosilylation of Alkenes
,” Comprehensive Organomet. Chem. III
, 10
, pp. 815
–838
. 25.
Oxman
, J. D.
, and Boardman
, L. D.
, 1992
, “Radiation Activated Hydrosilation Reaction,” U.S. Patent No. 5,145,886, U.S. Patent and Trademark Office, Washington, DC.26.
Oxman
, J. D.
, and Boardman
, L. D.
, 2002
, “Hydrosilation Reaction Utilizing a (Cyclopentadiene)(Sigma-Aliphatic) Platinum Complex and a Free Radical Photoinitiator,” U.S. Patent No. 6,376,569, U.S. Patent and Trademark Office, Washington, DC.27.
Al-Turaif
, H. A.
, 2010
, “Effect of Nano TiO2 Particle Size on Mechanical Properties of Cured Epoxy Resin
,” Prog. Org. Coat.
, 69
(3
), pp. 241
–246
. 28.
Xiao
, C.
, Tan
, Y.
, Yang
, X.
, Xu
, T.
, Wang
, L.
, and Qi
, Z.
, 2018
, “Mechanical Properties and Strengthening Mechanism of Epoxy Resin Reinforced With Nano-SiO2 Particles and Multi-walled Carbon Nanotubes
,” Chem. Phys. Lett.
, 695
, pp. 34
–43
. 29.
Thomas
, D.
, and Moore
, B.
, 1972
, “Filler Reinforcement in Silicone Polymers
,” Polymer
, 13
(3
), pp. 109
–114
. 30.
Rodriguez
, N. A.
, Song
, H.
, Chen
, M.
, Oakdale
, J. S.
, Duoss
, E. B.
, Seepersad
, C. C.
, and Crawford
, R. H. J. A. M.
, 2022
, “Use of Wire Grid Polarizers With Liquid Crystal Display for Large-Volume Stereolithography
,” Addit. Manuf.
, 52
, p. 102641
. 31.
Duoss
, E. B.
, Oakdale
, J.
, Rodriguez
, N. A.
, Hongtao
, S.
, Crawford
, R.
, Seepersad
, C.
, and Chen
, M.
, 2022
, “System and Method for Liquid Crystal Display System Incorporating Wire Grid Polarizers for Large Scale and Large Volume Stereolithography,” Google Patents.32.
Texas_Instruments
, 2017
, “DLP9500UV DLP® 0.95 UV 1080p 2x LVDS Type A DMD Datasheet (Rev. C)
,” https://www.ti.com/lit/ds/symlink/dlp9500uv.pdf33.
Song
, H.
, Rodriguez
, N. A.
, Seepersad
, C. C.
, Crawford
, R. H.
, Chen
, M.
, and Duoss
, E. B.
, 2021
, “Development of a Variable Tensioning System to Reduce Separation Force in Large Scale Stereolithography
,” Addit. Manuf.
, 38
, p. 101816
. 34.
Duoss
, E. B.
, Oakdale
, J.
, Rodriguez
, N. A.
, Hongtao
, S.
, Crawford
, R.
, Seepersad
, C.
, and Chen
, M.
, 2023
, “System and Method for Roll-to-Roll Film Tensioning for Reduced Separation Force During Bottom-Up Stereolithography,” Google Patents.35.
de Blas Romero
, A.
, Pfaffinger
, M.
, Mitteramskogler
, G.
, Schwentenwein
, M.
, Jellinek
, C.
, Homa
, J.
, Díaz Lantada
, A.
, and Stampfl
, J.
, 2017
, “Lithography-Based Additive Manufacture of Ceramic Biodevices With Design-Controlled Surface Topographies
,” Int. J. Adv. Manuf. Technol.
, 88
(5
), pp. 1547
–1555
. 36.
Harrer
, W.
, Schwentenwein
, M.
, Lube
, T.
, and Danzer
, R.
, 2017
, “Fractography of Zirconia-Specimens Made Using Additive Manufacturing (LCM) Technology
,” J. Eur. Ceram. Soc.
, 37
(14
), pp. 4331
–4338
. 37.
Rodriguez
, N.
, Ruelas
, S.
, Forien
, J.-B.
, Dudukovic
, N.
, DeOtte
, J.
, Rodriguez
, J.
, Moran
, B.
, Lewicki
, J. P.
, Duoss
, E. B.
, and Oakdale
, J. S.
, 2021
, “3D Printing of High Viscosity Reinforced Silicone Elastomers
,” Polymers
, 13
(14
), p. 2239
. 38.
Song
, X.
, 2016
, Slurry Based Stereolithography: A Solid Freeform Fabrication Method of Ceramics and Composites
, University of Southern California
, Los Angeles, CA
.39.
He
, L.
, Fei
, F.
, Wang
, W.
, and Song
, X.
, 2019
, “Support-Free Ceramic Stereolithography of Complex Overhanging Structures Based on an Elasto-viscoplastic Suspension Feedstock
,” ACS Appl. Mater. Interfaces
, 11
(20
), pp. 18849
–18857
. 40.
Dow-Corning
, 2017
, “SYLGARD™ 184 Silicone Elastomer Technical Datasheet,” https://www.dow.com/content/dam/dcc/documents/en-us/productdatasheet/11/11-31/11-3184-sylgard-184-elastomer.pdf41.
Zhao
, T.
, Yu
, R.
, Li
, S.
, Li
, X.
, Zhang
, Y.
, Yang
, X.
, Zhao
, X.
, et al, 2019
, “Superstretchable and Processable Silicone Elastomers by Digital Light Processing 3D Printing
,” ACS Appl. Mater. Interfaces
, 11
(15
), pp. 14391
–14398
. 42.
Jacobs
, P. F.
, 1992
, Fundamentals of Stereolithography
, Society of Manufacturing Engineers
, Southfield, MI
.43.
Troegel
, D.
, and Stohrer
, J.
, 2011
, “Recent Advances and Actual Challenges in Late Transition Metal Catalyzed Hydrosilylation of Olefins From an Industrial Point of View
,” Coord. Chem. Rev.
, 255
(13–14
), pp. 1440
–1459
. 44.
Decker
, C.
, 1996
, “Photoinitiated Crosslinking Polymerisation
,” Prog. Polym. Sci.
, 21
(4
), pp. 593
–650
. 45.
Germain
, L.
, Fuentes
, C. A.
, van Vuure
, A. W.
, des Rieux
, A.
, and Dupont-Gillain
, C.
, 2018
, “3D-Printed Biodegradable Gyroid Scaffolds for Tissue Engineering Applications
,” Mater. Des.
, 151
, pp. 113
–122
. 46.
González-Castaño
, M.
, Baena-Moreno
, F.
, De Miguel
, J. C. N.
, Miah
, K. U. M.
, Arroyo-Torralvo
, F.
, Ossenbrink
, R.
, Odriozola
, J. A.
, et al, 2022
, “3D-Printed Structured Catalysts for CO2 Methanation Reaction: Advancing of Gyroid-Based Geometries
,” Energy Convers. Manage.
, 258
, p. 115464
. 47.
Kardel
, K.
, Carrano
, A. L.
, Blersch
, D. M.
, and Kaur
, M.
, 2015
, “Preliminary Development of 3D-Printed Custom Substrata for Benthic Algal Biofilms
,” 3D Print. Addit. Manuf.
, 2
(1
), pp. 12
–19
. 48.
Martinez
, R. V.
, Fish
, C. R.
, Chen
, X.
, and Whitesides
, G. M.
, 2012
, “Elastomeric Origami: Programmable Paper-Elastomer Composites as Pneumatic Actuators
,” Adv. Funct. Mater.
, 22
(7
), pp. 1376
–1384
. 49.
Mosadegh
, B.
, Polygerinos
, P.
, Keplinger
, C.
, Wennstedt
, S.
, Shepherd
, R. F.
, Gupta
, U.
, Shim
, J.
, Bertoldi
, K.
, Walsh
, C. J.
, and Whitesides
, G. M.
, 2014
, “Pneumatic Networks for Soft Robotics That Actuate Rapidly
,” Adv. Funct. Mater.
, 24
(15
), pp. 2163
–2170
. 50.
Carbonell
, R.
, Song
, H.
, Seepersad
, C.
, and Crawford
, R.
, 2023
, “Design for Additive Manufacturing of Pneumatic Soft Robotics Via a Large-Scale, High-Viscosity Vat Photopolymerization Process
,” Paper Presented at the International Design Engineering Technical Conferences and Computers and Information in Engineering Conference
, Boston, MA
, Aug. 22
.
