Light Activated Adhesive Gripper (LAAG) workholding technology is a means by which a workpiece is held by adhesive joints that can be instantaneously cured or destroyed, on demand. A LAAG joint is the adhesive bond between the gripper pin and workpiece. Due to the novelty of this concept, no knowledge exists with regard to how LAAG joints deform and fail during quasi-static loading. This paper describes an investigation that was carried out to characterize the strength, ductility, and failure modes of a LAAG joint adhering a machined, steel surface subject to axial loading and shear loading.
Issue Section:
Technical Papers
Keywords:
adhesion,
grippers,
adhesive bonding,
curing,
ductility,
shear strength,
shear deformation,
machining,
tensile testing,
fixtures
1.
De Meter, E. C., 2003, “Light Activated Adhesive Gripper (LAAG) Technology and Process,” SME J. Manufacturing Process. (submitted).
2.
Timoshenko, S. P., and J. N. Goodier, 1987, Theory of Elasticity, 3rd ed., McGraw-Hill, New York.
3.
Petrie, E. M., 2001, Handbook of Adhesives and Sealants, McGraw–Hill, New York.
4.
Popov, E. P., 1979, Mechanics of Materials, 2nd ed., Prentice–Hall, Englewood Cliffs, NJ, pp. 294–299.
5.
Dymax, 2001, On-line data sheet, www.dymax.com
6.
Bachmann, 2001, A. G., Advances in Light Curing Adhesives, Paper No. 4444-20, Proceedings of the SPIE, San Diego, CA, pp. 1–15.
7.
Miller, E., editor, 2001, Plastic Products Design Handbook, Part A Materials and Components, Society of Plastics Engineers, Marcel Dekker, New York.
8.
Walpole, R. E., and Myers, R. H., 1980, Probability and Statistics for Engineers and Scientists, 2nd ed., MacMillan, New York.
Copyright © 2005
by ASME
You do not currently have access to this content.