Abstract
Film cooling is one of the most efficient and widely used cooling methods for high-temperature components. The interaction between the film cooling jet and main flow creates the counter-rotating vortex pair (CRVP), which enhances the mixing between coolant and hot stream and lifts the coolant film off the protected surface. The desire to overcome the unfavorable effects of CRVP and thus efficiently improve cooling effectiveness promotes various new combined-hole designs for film cooling. In this review paper, a summary of previous progress on film cooling and a special focus on recent literature related to the combined-hole film cooling designs with less difficulty in machining are provided. The underlying mechanisms of the enhancement in cooling effectiveness and film coverage due to antikidney vortex structure by combined holes are analyzed. Some perspectives on future prospects are finally addressed.
Issue Section:
Review Article
References
1.
Bogard
,
D. G.
, and
Thole
,
K. A.
, 2006
, “
Gas Turbine Film Cooling
,” AIAA J. Propul. Power
,
22
(2
), pp. 249
–270
.10.2514/1.180342.
Liu
,
X.
,
Zhang
,
G.
,
Sunden
,
B.
, and
Xie
,
G.
, 2018
, “
Numerical Predictions of Flow and Heat Transfer of Film Cooling With an Internal Channel Roughened by Crescent Ribs
,” Numer. Heat Transfer Part A: Appl.
,
74
(9
), pp. 1539
–1564
.10.1080/10407782.2018.15382913.
Chen
,
Z.
,
Zhang
,
Z.
,
Li
,
Y.
,
Su
,
X.
, and
Yuan
,
X.
, 2019
, “
Vortex Dynamics Based Analysis of Internal Crossflow Effect on Film Cooling Performance
,” Int. J. Heat Mass Transfer
,
145
, p. 118757
.10.1016/j.ijheatmasstransfer.2019.1187574.
Jiang
,
Y.
,
Yue
,
G.
,
Dong
,
P.
,
Gao
,
J.
, and
Zheng
,
Q.
, 2017
, “
Investigation on Film Cooling With Swirling Coolant Flow by Optimizing the Inflow Chamber
,” Int. Commun. Heat Mass Transfer
,
88
, pp. 99
–107
.10.1016/j.icheatmasstransfer.2017.08.0085.
Liu
,
C.
,
Ye
,
L.
,
Zhu
,
H.
, and
Luo
,
J.
, 2017
, “
Investigation on the Effects of Rib Orientation Angle on the Film Cooling With Ribbed Cross-Flow Coolant Channel
,” Int. J. Heat Mass Transfer
,
115
, pp. 379
–394
.10.1016/j.ijheatmasstransfer.2017.08.0636.
Barringer
,
M. D.
,
Thole
,
K. A.
, and
Polanka
,
M. D.
, 2009
, “
Effects of Combustor Exit Profiles on Vane Aerodynamic Loading and Heat Transfer in a High Pressure Turbine
,” ASME J. Turbomach.
,
131
(2
), pp. 285
–295
.10.1115/1.29500517.
Giller
,
L.
, and
Schiffer
,
H. P.
, 2012
, “
Interactions Between the Combustor Swirl and the High Pressure Stator of a Turbine
,” ASME
Paper No. GT2012-69157.10.1115/GT2012-691578.
Bunker
,
R. S.
, 2005
, “
A Review of Shaped Hole Turbine Film-Cooling Technology
,” ASME J. Heat Transfer
,
127
(4
), pp. 441
–453
.10.1115/1.18605629.
Oliver
,
T. A.
,
Bogard
,
D. G.
, and
Moser
,
R. D.
, 2019
, “
Large Eddy Simulation of Compressible, Shaped-Hole Film Cooling
,” Int. J. Heat Mass Transfer
,
140
, pp. 498
–517
.10.1016/j.ijheatmasstransfer.2019.04.11910.
Dai
,
P.
, and
Lin
,
F.
, 2011
, “
Numerical Study on Film Cooling Effectiveness From Shaped and Crescent Holes
,” Heat Mass Transfer
,
47
(2
), pp. 147
–154
.10.1007/s00231-010-0692-511.
Yao
,
Y.
,
Zhang
,
J.
, and
Wang
,
L.
, 2013
, “
Film Cooling on a Gas Turbine Blade Suction Side With Converging Slot-Hole
,” Int. J. Therm. Sci.
,
65
, pp. 267
–279
.10.1016/j.ijthermalsci.2012.10.00412.
Fu
,
Z.
,
Zhu
,
H.
,
Liu
,
C.
,
Wei
,
J.
, and
Zhang
,
B.
, 2018
, “
Investigation of the Influence of Inclination Angle and Diffusion Angle on the Film Cooling Performance of Chevron Shaped Hole
,” J. Therm. Sci.
,
27
(6
), pp. 580
–591
.10.1007/s11630-018-1070-813.
Davidson
,
F. T.
,
KistenMacher
,
D. A.
, and
Bogard
,
D. G.
, 2014
, “
Film Cooling With a Thermal Barrier Coating: Round Holes, Craters, and Trenches
,” ASME J. Turbomach.
,
136
(4
), p. 041007
.10.1115/1.402488314.
Abdala
,
A. M. M.
,
Elwekeel
,
F. N. M.
, and
Huang
,
D.
, 2016
, “
Film Cooling Effectiveness and Flow Structures for Novel Upstream Steps
,” Appl. Therm. Eng.
,
105
, pp. 397
–410
.10.1016/j.applthermaleng.2015.05.07415.
Na
,
S.
, and
Shih
,
T.
, 2007
, “
Increasing Adiabatic Film-Cooling Effectiveness by Using an Upstream Ramp
,” ASME J. Heat Transfer
,
129
(4
), pp. 464
–471
.10.1115/1.270996516.
Hou
,
R.
,
Wen
,
F.
,
Wang
,
S.
,
Luo
,
Y.
, and
Tang
,
X.
, 2019
, “
Large Eddy Simulation of the Trenched Film Cooling Hole With Different Compound Angles and Coolant Inflow Orientation Effects
,” Appl. Therm. Eng.
,
163
, p. 114397
.10.1016/j.applthermaleng.2019.11439717.
Du
,
K.
,
Li
,
Z.
, and
Li
,
J.
, 2019
, “
Effects of Trenched Film Hole Configurations on the Endwall Film Cooling and Suction Side Phantom Cooling
,” J. Therm. Sci.
,
28
(5
), pp. 905
–914
.10.1007/s11630-019-1195-418.
Hou
,
R.
,
Wen
,
F.
,
Cui
,
T.
,
Tang
,
X.
, and
Wang
,
S.
, 2019
, “
Effect of Different Trench Lips on Downstream Film Cooling Effectiveness and Flow Fields
,” J. Therm. Sci.
,
28
(2
), pp. 340
–353
.10.1007/s11630-018-1061-919.
Li
,
Y.
,
Wu
,
H.
,
Zhou
,
F.
, and
Rong
,
C.
, 2016
, “
Research on Cooling Effectiveness in Stepped Slot Film Cooling Vane
,” J. Therm. Sci.
,
25
(3
), pp. 273
–279
.10.1007/s11630-016-0860-020.
Fric
,
T. F.
, and
Roshko
,
A.
, 1994
, “
Vortical Structure in the Wake of a Transverse Jet
,” J. Fluid Mech.
,
279
, pp. 1
–47
.10.1017/S002211209400380021.
Haven
,
B. A.
,
Yamagata
,
D. K.
,
Kurosaka
,
M.
,
Yamawaki
,
S.
, and
Maya
,
T.
, “
Anti-Kidney Pair of Vortices in Shaped Holes and Their Influence on Film Cooling Effectiveness
,” ASME
Paper No. 97-GT-045.10.1115/97-GT-045 2422.
Kelso
,
R. M.
,
Lim
,
T. T.
, and
Perry
,
A. E.
, 1996
, “
An Experimental Study of Round Jets in Cross-Flow
,” J. Fluid Mech.
,
306
, pp. 111
–144
.10.1017/S002211209600125523.
Haven
,
B. A.
, and
Kurosaka
,
M.
, 1997
, “
Kidney and Anti-Kidney Vortices in Crossflow Jets
,” J. Fluid Mech.
,
352
, pp. 27
–64
.10.1017/S002211209700727124.
Javadi
,
K.
,
Taeibi-Rahni
,
M.
, and
Darbandi
,
M.
, 2005
, “
Jet Into Cross Flow Boundary Layer Control - An Innovation in Gas Turbine Blade Cooling
,” AIAA
Paper No. 2005-5272.10.2514/6.2005-527225.
Javadi
,
K.
, 2018
, “
Introducing Film Cooling Uniformity Coefficient
,” Heat Transfer Eng.
,
39
(2
), pp. 180
–193
.10.1080/01457632.2017.128805626.
Taeibi-Rahni
,
M.
,
Javadi
,
A.
,
Javadi
,
K.
, and
Darbandi
,
M.
, 2003
, “
A New Approach to Improve Film Cooling Effectiveness, Using Combined Jets
,” The International Gas Turbine Congress, Tokyo, Japan, Report No. TS-071
.https://www.researchgate.net/publication/310674502_A_New_Approach_to_Improve_Film_Cooling_Effectiveness_Using_Combined_Jets27.
Ely
,
M. J.
, and
Jubran
,
B. A.
, 2009
, “
A Numerical Study on Improving Large Angle Film Cooling Performance Through the Use of Sister Holes
,” Numer. Heat Transfer, Part A: Appl.
,
55
(7
), pp. 634
–653
.10.1080/1040778090282153228.
Ely
,
M. J.
, and
Jubran
,
B. A.
, 2009
, “
A Numerical Evaluation on the Effect of Sister Holes on Film Cooling Effectiveness and the Surrounding Flow Field
,” Heat Mass Transfer
,
45
(11
), pp. 1435
–1446
.10.1007/s00231-009-0523-829.
Ely
,
M. J.
, and
Jubran
,
B. A.
, 2010
, “
A Parametric Study on the Effect of Sister Hole Location on Active Film Cooling Flow Control
,” ASME
Paper No. GT2010-22060.10.1115/GT2010-2206030.
Ely
,
M. J.
, and
Jubran
,
B. A.
, 2012
, “
Film Cooling From Short Holes With Sister Hole Influence
,” ASME
Paper No. GT2012-68601.10.1115/GT2012-6860131.
Dai
,
S.
,
Xiao
,
Y.
,
He
,
L.
,
Jin
,
T.
, and
Zhao
,
Z.
, 2016
, “
Film Cooling From a Cylindrical Hole With Parallel Auxiliary Holes Influences
,” Numer. Heat Transfer Part A: Appl.
,
69
(5
), pp. 497
–511
.10.1080/10407782.2015.108102332.
Khajehhasani
,
S.
, and
Jubran
,
B. A.
, 2016
, “
A Numerical Investigation of Film Cooling Performance Through Variations in the Location of Discrete Sister Holes
,” Appl. Therm. Eng.
,
107
, pp. 345
–364
.10.1016/j.applthermaleng.2016.06.13533.
Zhu
,
R.
,
Simon
,
T. W.
, and
Xie
,
G.
, 2018
, “
Influence of Secondary Hole Injection Angle on Enhancement of Film Cooling Effectiveness With Horn-Shaped or Cylindrical Primary Holes
,” Numer. Heat Transfer, Part A: Appl.
,
74
(5
), pp. 1207
–1227
.10.1080/10407782.2018.149008834.
Zhou
,
J.
,
Wang
,
X.
,
Li
,
J.
, and
Lu
,
H.
, 2020
, “
Effects of Diameter Ratio and Inclination Angle on Flow and Heat Transfer Characteristics of Sister Holes Film Cooling
,” Int. Commun. Heat Mass Transfer
,
110
, p. 104426
.10.1016/j.icheatmasstransfer.2019.10442635.
Wu
,
H.
,
Cheng
,
H.
,
Li
,
Y.
,
Rong
,
C.
, and
Ding
,
S.
,
2016
, “
Effects of Side Hole Position and Blowing Ratio on Sister Hole Film Cooling Performance in a Flat Plate
,” Appl. Therm. Eng.
,
93
, pp. 718
–730
.10.1016/j.applthermaleng.2015.09.11836.
Cheng
,
H.
,
Wu
,
H.
,
Li
,
Y.
, and
Ding
,
S.
, 2017
, “
Effect of Rotation on a Downstream Sister Holes Film Cooling Performance in a Flat Plate Model
,” Exp. Therm. Fluid Sci.
,
85
, pp. 154
–166
.10.1016/j.expthermflusci.2017.03.00137.
Heidmann
,
J. D.
, and
Ekkad
,
S.
, 2007
, “
A Novel Antivortex Turbine Film-Cooling Hole Concept
,” ASME
Paper No. GT2007-27528.10.1115/GT2007-2752838.
Dhungel
,
A.
,
Lu
,
Y.
,
Phillips
,
W.
,
Ekkad
,
S. V.
, and
Heidmann
,
J.
, 2009
, “
Film Cooling From a Row of Holes Supplemented With Antivortex Holes
,” ASME J. Turbomach.
,
131
(2
), p. 021007
.10.1115/1.295005939.
LeBlanc
,
C. N.
,
Ramesh
,
S.
,
Ekkad
,
S. V.
, and
Alvin
,
M. A.
, 2013
, “
Effect of Hole Exit Shaping on Film Cooling Performance for Tripod Hole Injection Over a Flat Surface
,” ASME
Paper No. GT2013-94456.10.1115/GT2013-9445640.
Ramesh
,
S.
,
Ramirez
,
D. G.
,
Ekkad
,
S. V.
, and
Alvin
,
M. A.
, 2016
, “
Analysis of Film Cooling Performance of Advanced Tripod Hole Geometries With and Without Manufacturing Features
,” Int. J. Heat Mass Transfer
,
94
, pp. 9
–19
.10.1016/j.ijheatmasstransfer.2015.11.03341.
LeBlanc
,
C.
,
Narzary
,
D. P.
, and
Ekkad
,
S.
, 2013
, “
Film-Cooling Performance of Antivortex Hole on a Flat Plate
,” ASME J. Turbomach.
,
135
(6
), p. 061009
.10.1115/1.402343642.
Hayes
,
S. A.
,
Nix
,
A. C.
,
Nestor
,
C. M.
,
Billups
,
D. T.
, and
Haught
,
S. M.
, 2017
, “
Experimental Investigation of the Influence of Freestream Turbulence on an Anti-Vortex Film Cooling Hole
,” Exp. Therm. Fluid Sci.
,
81
, pp. 314
–326
.10.1016/j.expthermflusci.2016.10.02543.
Park
,
S. S.
,
Kim
,
Y. J.
, and
Kwak
,
J. S.
, 2017
, “
Film-Cooling Effectiveness of Antivortex Holes at Three Different Mainstream Turbulence Levels
,” AIAA J. Propul. Power
,
33
(6
), pp. 1561
–1569
.10.2514/1.B3621244.
Repko
,
T. W.
,
Nix
,
A. C.
,
Uysal
,
S. C.
, and
Sisler
,
A. T.
, 2016
, “
Flow Visualization of Multi-Hole Film-Cooling Flow Under Varying Freestream Turbulence Levels
,” J. Flow Control, Meas. Visualization
,
04
(01
), pp. 13
–29
.10.4236/jfcmv.2016.4100245.
Ramesh
,
S.
,
LeBlanc
,
C.
,
Narzary
,
D.
,
Ekkad
,
S.
, and
Anne Alvin
,
M.
, 2017
, “
Film Cooling Performance of Tripod Antivortex Injection Holes Over the Pressure and Suction Surfaces of a Nozzle Guide Vane
,” ASME J. Therm. Sci. Eng. Appl.
,
9
(2
), p. 021006
.10.1115/1.403529046.
Al-Zurfi
,
N.
,
Turan
,
A.
,
Nasser
,
A.
, and
Alhusseny
,
A.
, 2019
, “
A Numerical Study of Anti-Vortex Film-Cooling Holes Designs in a 1-1/2 Turbine Stage Using LES
,” Propul. Power Res.
,
8
(4
), pp. 275
–299
.10.1016/j.jppr.2019.10.00147.
Kusterer
,
K.
,
Bohn
,
D.
,
Sugimoto
,
T.
, and
Tanaka
,
R.
, 2007
, “
Double-Jet Ejection of Cooling Air for Improved Film Cooling
,” ASME J. Turbomach.
,
129
(4
), pp. 809
–815
.10.1115/1.272050848.
Kusterer
,
K.
,
Elyas
,
A.
, and
Bohn
,
D.
, 2010
, “
Film Cooling Effectiveness Comparison Between Shaped and Double Jet Film Cooling Holes
,” ASME
Paper No. GT2010-22604.10.1115/GT2010-2260449.
Choi
,
D.-W.
,
Lee
,
K.-D.
, and
Kim
,
K.-Y.
, 2013
, “
Analysis and Optimization of Double-Jet Film-Cooling Holes
,” J. Thermophys. Heat Transfer
,
27
(2
), pp. 246
–254
.10.2514/1.T406050.
Lee
,
K.-D.
,
Choi
,
D.-W.
, and
Kim
,
K.-Y.
, 2013
, “
Optimization of Ejection Angles of Double-Jet Film-Cooling Holes Using RBNN Model
,” Int. J. Therm. Sci.
,
73
, pp. 69
–78
.10.1016/j.ijthermalsci.2013.05.01551.
Han
,
C.
,
Ren
,
J.
, and
Jiang
,
H.-D.
, 2012
, “
Multi-Parameter Influence on Combined-Hole Film Cooling System
,” Int. J. Heat Mass Transfer
,
55
(15–16
), pp. 4232
–4240
.10.1016/j.ijheatmasstransfer.2012.03.06452.
Gräf
,
L.
, and
Kleiser
,
L.
, 2014
, “
Film Cooling Using Antikidney Vortex Pairs: Effect of Blowing Conditions and Yaw Angle on Cooling and Losses
,” ASME J. Turbomach.
,
136
(1
), p. 011018
.10.1115/1.402464853.
Khalatov
,
A. A.
,
Borisov
,
I. I.
,
Dashevsky
,
Y. J.
,
Panchenko
,
N. A.
, and
Kovalenko
,
A. S.
, 2014
, “
Flat-Plate Film Cooling From a Double Jet Holes: Influence of Free-Stream Turbulence and Flow Acceleration
,” Thermophys. Aeromech.
,
21
(5
), pp. 545
–552
.10.1134/S086986431405002354.
Hariram
,
V.
,
Micha Premkumar
,
T.
,
Roychowdhury
,
D. G.
,
Sivamani
,
S.
, and
Kannan
,
E.
, 2019
, “
Improvement in Film Cooling Effectiveness Using Single and Double Rows of Holes With Adverse Compound Angle Orientations
,” ASME J. Therm. Sci. Eng. Appl.
,
11
(2
), p. 021014
.10.1115/1.404193755.
Wang
,
Z.
,
Zhang
,
C.
,
Li
,
S. J.
,
Liu
,
J. J.
, and
Zhang
,
H. W.
, 2019
, “
Effects of Geometry Parameters on the Cooling Performance and Conjugate Thermal-Elastic Property of Double-Reverse-Jet Film Cooling
,” J. Appl. Mech. Tech. Phys.
,
60
(6
), pp. 1060
–1067
.10.1134/S002189441906011756.
Yao
,
J. X.
,
Xu
,
J.
,
Zhang
,
K.
,
Lei
,
J.
, and
Wright
,
L. M.
, 2018
, “
Interaction of Flow and Film Cooling Effectiveness Between Double-Jet Film-Cooling Holes With Various Spanwise Distances
,” ASME J. Turbomach.
,
140
(12
) p. 121011
.10.1115/1.404180957.
Yao
,
J.
,
Zhang
,
K.
,
Wu
,
J.
,
Lei
,
J.
,
Fang
,
Y.
, and
Wright
,
L. M.
, 2019
, “
An Experimental Investigation on Streamwise Distance and Density Ratio Effects on Double-Jet Film-Cooling
,” Appl. Therm. Eng.
,
156
, pp. 410
–421
.10.1016/j.applthermaleng.2019.04.08158.
Yao
,
J.
,
Su
,
P.
,
He
,
J.
,
Wu
,
J.
,
Lei
,
J.
, and
Fang
,
Y.
, 2020
, “
Experimental and Numerical Investigations on Double-Jet Film-Cooling With Different Mainstream Incidence Angles
,” Appl. Therm. Eng.
,
166
, p. 114737
.10.1016/j.applthermaleng.2019.11473759.
He
,
J.
,
Yao
,
J.
,
Yang
,
X.
,
Duan
,
J.
,
Lei
,
J.
, and
Xie
,
G.
, 2020
, “
Effects of Mainstream Attack Angles on Film-Cooling Effectiveness of Double-Jet Film-Cooling
,” Int. J. Therm. Sci.
,
149
, p. 106183
.10.1016/j.ijthermalsci.2019.10618360.
Li
,
G.-C.
, and
Zhang
,
W.
, 2010
, “
Improving Film Cooling Performance by Using One-Inlet and Double-Outlet Hole
,” J. Therm. Sci.
,
19
(5
), pp. 430
–437
.10.1007/s11630-010-0405-x61.
Li
,
G. C.
,
Chen
,
Y. K.
,
Kou
,
Z. H.
,
Zhang
,
W.
, and
Zhang
,
G. C.
, 2018
, “
Mechanism of Film Cooling With One Inlet and Double Outlet Hole Injection at Various Turbulence Intensities
,” Int. J. Turbo Jet-Eng.
,
35
(1
), pp. 1
–9
.10.1515/tjj-2016-002462.
Abdelmohimen
,
M. A. H.
, 2017
, “
Improving Film Cooling From Compound Angle Holes by Adding Secondary Holes Branched Out From the Main Holes
,” Heat Mass Transfer
,
53
(5
), pp. 1805
–1815
.10.1007/s00231-016-1938-763.
Abdelmohimen
,
M. A. H.
, and
Mohiuddin
,
A.
, 2019
, “
Experimental Investigation of Film Cooling From Compound Angle Holes Supplemented by Secondary Holes
,” Int. J. Heat Mass Transfer
,
144
, p. 118678
.10.1016/j.ijheatmasstransfer.2019.11867864.
Chi
,
Z.
,
Ren
,
J.
,
Jiang
,
H.
, and
Zang
,
S.
, 2016
, “
Geometrical Optimization and Experimental Validation of a Tripod Film Cooling Hole With Asymmetric Side Holes
,” ASME J. Heat Transfer
,
138
(6
), p. 061701
.10.1115/1.403288365.
Khajehhasani
,
S.
, and
Jubran
,
B.
, 2014
, “
Film Cooling From Novel Sister Shaped Single-Holes
,” ASME
Paper No. GT2014-25971.10.1115/GT2014-2597166.
Khajehhasani
,
S.
, and
Jubran
,
B. A.
, 2015
, “
Numerical Assessment of the Film Cooling Through Novel Sister-Shaped Single-Hole Schemes
,” Numer. Heat Transfer, Part A: Appl.
,
67
(4
), pp. 414
–435
.10.1080/10407782.2014.93725767.
Khajehhasani
,
S.
, and
Jubran
,
B. A.
, 2015
, “
A Numerical Investigation on the Performance of Novel Sister Shaped Single-Hole Configurations for Film Cooling Flow
,” ASME
Paper No. IMECE2014-36263.10.1115/IMECE2014-3626368.
Kusterer
,
K.
,
Elyas
,
A.
,
Bohn
,
D.
,
Sugimoto
,
T.
,
Tanaka
,
R.
, and
Kazari
,
M.
, 2011
, “
The NEKOMIMI Cooling Technology: Cooling Holes With Ears for High-Efficient Film Cooling
,” ASME
Paper No. GT2011-45524.10.1115/GT2011-4552469.
Kusterer
,
K.
,
Tekin
,
N.
,
Bohn
,
D.
,
Sugimoto
,
T.
,
Tanaka
,
R.
, and
Kazari
,
M.
, 2012
, “
Experimental and Numerical Investigations of the NEKOMIMI Film Cooling Technology
,” ASME
Paper No. GT2012-68400.10.1115/GT2012-6840070.
Kusterer
,
K.
,
Tekin
,
N.
,
Wuellner
,
T.
,
Bohn
,
D.
,
Sugimoto
,
T.
,
Tanaka
,
R.
, and
Kazari
,
M.
, 2014
, “
NEKOMIMI Film Cooling Holes Configuration Under Conjugate Heat Transfer Conditions
,” ASME
Paper No. GT2014-25845.10.1115/GT2014-2584571.
Zhu
,
R.
,
Simon
,
T. W.
, and
Xie
,
G.
, 2019
, “
Influence on Film Cooling Effectiveness of Novel Holes Based on Cylindrical Configurations
,” Numer. Heat Transfer, Part A: Appl.
,
75
(7
), pp. 469
–488
.10.1080/10407782.2019.160662972.
Wang
,
J.
,
Tian
,
K.
,
Luo
,
J.
, and
Sundén
,
B.
, 2019
, “
Effect of Hole Configurations on Film Cooling Performance
,” Numer. Heat Transfer, Part A: Appl.
,
75
(11
), pp. 725
–738
.10.1080/10407782.2019.160876273.
Yang
,
X.
,
Liu
,
Z.
, and
Feng
,
Z.
, 2015
, “
Numerical Evaluation of Novel Shaped Holes for Enhancing Film Cooling Performance
,” ASME J. Heat Transfer
,
137
(7
), p. 071701
.10.1115/1.402981774.
Cao
,
N.
,
Li
,
X.
,
Wu
,
Z.
, and
Luo
,
X.
, 2020
, “
Effect of Film Hole Geometry and Blowing Ratio on Film Cooling Performance
,” Appl. Therm. Eng.
,
165
, p. 114578
.10.1016/j.applthermaleng.2019.114578Copyright © 2021 by ASME
You do not currently have access to this content.
