Fouling of heat transfer surfaces introduces a major uncertainty into the design and operation of heat transfer equipment. After a brief discussion on impact of fouling, we present and discuss a stochastic approach to the analysis of fouling models. In view of the performance indicator (U/Uc) of the heat exchangers, a maintenance strategy for planned maintenance schedules is presented. Various scenarios of reliability based maintenance strategy are introduced. The strategy is explained in terms of the scatter parameter (⁠α⁠) of the time-to-fouling distribution corresponding to a critical level of fouling, and the risk factor (p) representing the probability of tubes being fouled to a critical level after which a cleaning cycle is needed. In addition, the cost implications of the above mentioned strategy are explained and their impact on heat exchanger maintenance is highlighted.

Issue Section:
Heat Exchangers
Keywords:
Fouling, Heat Exchangers, Modeling & Scaling
Topics:
Heat exchangers, Heat transfer, Maintenance, Cycles, Design, Electromagnetic scattering, Modeling, Probability, Reliability, Risk, Uncertainty
1.
Ahmad
M.
, and
Sheikh
A. K.
,
1984
, “
Bernstein Reliability Model: Derivation and Estimation of Parameters
,”
Reliability Engineering
, Vol.
8
, No.
6
, pp.
131
–
148
.
2.
Al-Ahmad, M. I., Abdelaleem, F. A., 1991, “Scale and Fouling Problems and its Reflection on the Performance of Industrial Thermal Processes,” Proceedings of the 3rd Saudi Engng. Conference, Riyadh, Saudi Arabia, Vol. 1, pp. 1–11.
3.
Bott, T. R., 1995, Fouling of Heat Exchangers, Elsevier Science Publishers Ltd., Amsterdam.
4.
Casado
E.
,
1990
, “
Model Optimizes Exchanger Cleaning
,”
Hydrocarbon Processing
, Vol.
69
, No.
8
, pp.
71
–
76
.
5.
Chenoweth
J. M.
,
1990
, “
Final Report of the HTRI/TEMA Joint Committee to Review the Fouling Section of the TEMA Standards
,”
Heat Transfer Engineering
, Vol.
11
, No.
1
, pp.
73
–
107
.
6.
Epstein, N., 1981, “Fouling: Technical Aspects (Afterword to Fouling in Heat Exchangers),” Fouling of Heat Transfer Equipment, E. F. C. Somerscales and J. G. Knudsen, eds., pp. 31–53. Hemisphere, Washington, D.C.
7.
Kern
D. Q.
, and
Seaton
R. E.
,
1959
, “
A Theoretical Analysis of Thermal Surface Fouling
,”
British Chemical Engineering
, Vol.
4
, No.
5
, pp.
258
–
262
.
8.
Knudsen, J. G., 1990, “Fouling in Heat Exchangers,” Hemisphere Handbook of Heat Exchanger Design, Hemisphere, Washington, D.C.
9.
Mitra, A., 1993, Fundamentals of Quality Control and Improvement, MacMillan Publishing Company, New York, NY.
10.
Sheikh
A. K.
,
Zubair
S. M.
,
Haq
M. U.
, and
Budair
M. O.
,
1996
, “
Reliability-Based Maintenance Strategies for Heat Exchangers Subject to Fouling
,”
ASME Journal of Energy Resources Technology
, Vol.
118
, No.
4
, pp.
306
–
312
.
11.
Somerscales
E. F. C
, and
Kassemi
M.
,
1987
, “
Fouling Due to Corrosion Products Formed on a Heat Transfer Surface
,”
ASME JOURNAL OF HEAT TRANSFER
, Vol.
109
, pp.
267
–
271
.
12.
Suitor
J. W.
,
Marner
W. J.
, and
Ritter
R. B.
,
1976
, “
The History and Status of Research in Fouling of Exchangers in Cooling Water Service
,”
The Canadian Journal of Chemical Engineering
, Vol.
55
, pp.
374
–
380
.
13.
Taborek
J.
,
Aoki
T.
,
Ritter
R. B.
,
Palen
J. W.
, and
Knudsen
J. G.
,
1972
a, “
Fouling: The Major Unresolved Problem in Heat Transfer
,”
Chemical Engineering Progress
, Vol.
68
, No,
2
, pp.
59
–
67
.
14.
Taborek
J.
,
Aoki
T.
,
Ritter
R. B.
,
Palen
J. W.
, and
Knudsen
J. G.
,
1972
b, “
Predictive Methods for Fouling Behavior
,”
Chemical Engineering Progress
, Vol.
68
, No.
7
, pp.
69
–
78
.
15.
Zubair
S. M.
,
Sheikh
A. K.
, and
Shaik
M. N.
,
1992
, “
A Probabilistic Approach to the Maintenance of Heat Transfer Equipment Subject to Fouling
,”
ENERGY
, Vol.
17
, No.
8
, pp.
769
–
776
.
16.
Zubair
S. M.
,
Sheikh
A. K.
,
Budair
M. 0.
,
Haq
M. U.
,
Quddus
A.
, and
Ashiru
O. A.
,
1997
, “
Statistical Aspects of CaCO3 Fouling in AISI 316 Stainless Steel Tubes
,”
ASME JOURNAL OF HEAT TRANSFER
, Vol.
119
, No.
3
, pp.
581
–
588
.
This content is only available via PDF.
Copyright © 1997
 by The American Society of Mechanical Engineers
You do not currently have access to this content.