... loads, it appears fundamental to accurately determine impact loads in order to be able to predict the erosion damage. cavitation confined flow flow measurement pressure measurement pressure sensors velocity measurement 11 05 2011 14 10 2011 19 12 2011 19 12 2011...

... measurement flow measurement flow simulation laser velocimetry numerical analysis pipe flow turbulence vortices turbulent secondary flow semi-circular duct CFD LDV Secondary flows are a mean flow in the transverse plane superimposed upon the axial mean flow and are generated...

... channel flow flow measurement neural nets probability two-phase flow two-phase flow flow regime annulus boiling neural network Two-phase flow interfacial structure has dynamic nature and it can adopt several topological configurations called flow patterns or flow regimes...

... blockage. 20 05 2011 16 08 2011 15 09 2011 15 09 2011 cavitation confined flow flow measurement pressure measurement velocity measurement ventilation Drag reduction and/or speed augmentation of marine vehicles by means of supercavitation is a topic of great interest...

... in crossflow over microscale pin fins under various hydrodynamic conditions. boundary layer turbulence drag external flows flow measurement microfluidics 23 01 2010 11 05 2011 16 08 2011 16 08 2011 References 1 Peles , Y. , Kuo , C. J. , Koşar...

... at the rod wall in the gap position. 28 06 2009 10 06 2011 19 07 2011 19 07 2011 boundary layer turbulence external flows flow measurement laminar flow pipe flow rods (structures) gas flow yawed cylinders row of cylinders wall pressure boundary layer...

.... Detail of the mesh on the surface of the hull Details of the volume mesh—#1 Details of the volume mesh—#2 Details of the volume mesh—#3 13 01 2011 06 05 2011 16 06 2011 16 06 2011 blades computational fluid dynamics external flows flow...

..., but taking gas flow rate measurements is more difficult and time consuming. flow measurement heat transfer laminar flow microchannel flow 29 03 2010 12 11 2010 22 12 2010 22 12 2010 2010 American Society of Mechanical Engineers ...

... flow area because it is more beneficial than full admission, which reduces the expansion ratio. partial admission turbine operating forces surface pressure linear cascade axial-type blade blades confined flow flow measurement nozzles pumps rotational flow turbines turbulence...

... distortion as compared with counter-rotating inflow distortion. aerodynamics blades compressors fans flow measurement rotational flow turbomachinery wavelet transforms flow instability rotating stall static inflow distortion dynamic inflow distortion stall inception Stable...

... to the pressure fluctuations. 27 05 2010 18 09 2010 18 11 2010 18 11 2010 fission reactor cooling flow measurement flow separation flow simulation fluctuations liquid metal fast breeder reactors pipe flow turbulence fast reactor cold-leg piping elbow flow flow-induced...

... of constant acceleration, a , and the following stage of constant cross-sectional mean velocity, u m , st . transition to turbulence turbulent slug constant acceleration flow unsteady pipe flow transient flow flow measurement laminar to turbulent transitions multiphase...

... insight into the flow details and has paved the way in optimization of the geometry based on jet injection angle to get a good mixing efficiency. 08 03 2010 14 09 2010 21 10 2010 21 10 2010 flow measurement flow simulation jets mixing numerical analysis pipe flow...

... by the product of the dynamic pressure head based on the velocity through the open flow area and the projected frontal area of the sensor cylinder, as shown in the Nomenclature. The volumetric flow rate was calculated from the pressure drop measurements made across the flow measurement device during testing...

... inlet is reduced by J-grooves. 28 04 2009 30 05 2010 29 06 2010 29 06 2010 flow control flow measurement hydraulic turbines pipe flow velocity measurement vortices fluid machinery diffuser swirl flow draft surge J-groove At partial-load operation...

... aerodynamics blades compressors flow measurement gas turbines impact (mechanical) surface roughness The need to reduce the overall life cycle cost of operating a gas turbine and the increasingly stringent regulation to reduce greenhouse gas (GHG) emissions are two of the most pressing constraints...

... 2010 aerodynamics blades flow measurement flow simulation propellers wind tunnels The development of turbofan propulsion has long dominated the aerospace industry. In current times one has to seriously keep in mind the supply of fossil fuels. Turboprops with their low fuel...

...Mayank Mittal; Harold J. Schock An experimental study is performed to investigate the cycle-to-cycle variations and the influence of charge motion control on in-cylinder flow measurement inside an internal combustion engine assembly. Molecular tagging velocimetry (MTV) is used to obtain...

... CFD aerodynamics computational fluid dynamics flow measurement Mach number subsonic flow 13 06 2009 13 01 2010 18 03 2010 18 03 2010 2010 American Society of Mechanical Engineers ...

... compressor, and a buffer tank is used to reduce the pressure fluctuation. The flow rates are controlled by operating a pressure regulator. A quick flow sensor (QFS) is used for the flow measurement ( 8 ). The target flow field is installed downstream of the QFS. Velocities were measured by hot wire...