Skip Nav Destination
Issues
May 1958
This article was originally published in
Transactions of the American Society of Mechanical Engineers
ISSN 0097-6822
In this Issue
Research Papers
Boundary Layer Along Annular Walls in a Swirling Flow
Trans. ASME. May 1958, 80(4): 767–774.
doi: https://doi.org/10.1115/1.4012505
Topics:
Boundary layers
,
Swirling flow
,
Boundary layer turbulence
,
Flow (Dynamics)
,
Momentum
,
Turbulence
Stall Propagation in a Cascade of Airfoils
Trans. ASME. May 1958, 80(4): 777–789.
doi: https://doi.org/10.1115/1.4012510
Topics:
Airfoils
,
Cascades (Fluid dynamics)
,
Blades
,
Boundary layers
,
Chords (Trusses)
,
Delays
,
Pressure
,
Rotors
,
Stability
,
Vortex shedding
Losses in Flow Normal to Plane Screens
Trans. ASME. May 1958, 80(4): 791–797.
doi: https://doi.org/10.1115/1.4012513
Topics:
Flow (Dynamics)
,
Reynolds number
,
Pressure
,
Fluids
,
Geometry
,
Wire
The Effect of Heat Conductance on Slider-Bearing Characteristics
Trans. ASME. May 1958, 80(4): 800–804.
doi: https://doi.org/10.1115/1.4012519
Topics:
Slider bearings
,
Thermal conductivity
,
Computers
,
Errors
,
Fluids
,
Heat
,
Leakage
,
Temperature
Influence of Load and Thermal Distortion on the Design of Large Thrust Bearings
Trans. ASME. May 1958, 80(4): 807–815.
doi: https://doi.org/10.1115/1.4012524
Topics:
Design
,
Stress
,
Thrust bearings
,
Bearings
,
Generators
,
Failure
,
Lubrication
Oil Seals to Provide Positive Lubrication on Large or High-Speed Thrust Bearings
Trans. ASME. May 1958, 80(4): 819–824.
doi: https://doi.org/10.1115/1.4012531
Topics:
Lubrication
,
Thrust bearings
,
Leakage
,
Bearings
,
Generators
The Behavior of the Lubricating Film and Side Leakage in Dynamically Loaded Bearings
Trans. ASME. May 1958, 80(4): 826–832.
doi: https://doi.org/10.1115/1.4012536
Interpreting Dynamic Measurements of Physical Systems: Part I—Aims and Objectives
Trans. ASME. May 1958, 80(4): 833–856.
doi: https://doi.org/10.1115/1.4012537
Topics:
Linear systems
Solution of Reynolds’ Equation for Finite Journal Bearings
Trans. ASME. May 1958, 80(4): 858–864.
doi: https://doi.org/10.1115/1.4012539
Topics:
Journal bearings
,
Bearings
,
Computers
,
Differential equations
,
Film thickness
,
Flow (Dynamics)
,
Temperature
Theoretical and Experimental Analysis of Hydrodynamic Gas-Lubricated Journal Bearings
Trans. ASME. May 1958, 80(4): 865–875.
doi: https://doi.org/10.1115/1.4012540
Topics:
Experimental analysis
,
Journal bearings
,
Lubricants
,
Bearings
,
Contamination
,
Design
,
Friction
,
Gas bearings
,
High temperature
,
Jet engines
The Variable Fluid-Property Problem in Free Convection
Trans. ASME. May 1958, 80(4): 879–886.
doi: https://doi.org/10.1115/1.4012546
Topics:
Fluids
,
Natural convection
,
Gases
,
Heat transfer
,
Temperature
,
Boundary layers
,
Computational methods
,
Flat plates
Laminar Film Condensation of Pure Saturated Vapors on Inclined Circular Cylinders
Trans. ASME. May 1958, 80(4): 887–894.
doi: https://doi.org/10.1115/1.4012549
Topics:
Circular cylinders
,
Film condensation
,
Vapors
,
Cylinders
,
Steam
,
Condensation
,
Copper
,
Film thickness
,
Temperature
,
Theoretical analysis
The Third Law of Thermodynamics: A Half-Century Appraisal of the Nernst Heat Theorem
Trans. ASME. May 1958, 80(4): 895–903.
doi: https://doi.org/10.1115/1.4012550
Topics:
Heat
,
Theorems (Mathematics)
,
Thermodynamics
,
Low temperature
The Effect of Conduit Dynamics on Control-Valve Stability
Trans. ASME. May 1958, 80(4): 904–908.
doi: https://doi.org/10.1115/1.4012551
Topics:
Dynamics (Mechanics)
,
Stability
,
Valves
,
Computers
Work Capacities of Energy Storage Systems on Basis of Unit Weight and Unit Volume
Trans. ASME. May 1958, 80(4): 909–914.
doi: https://doi.org/10.1115/1.4012555
Resistance to Rolling and Sliding
Trans. ASME. May 1958, 80(4): 915–919.
doi: https://doi.org/10.1115/1.4012557
Comparison of Semi-Empirical Solutions for Crack Propagation With Experiments
Trans. ASME. May 1958, 80(4): 921–926.
doi: https://doi.org/10.1115/1.4012561
Topics:
Crack propagation
,
Aluminum alloys
,
Fracture (Materials)
,
Sheet materials
,
Steel
,
Stress concentration
,
Tensile strength
,
Tension
Analysis of Residual Stress in Ground Surfaces of High-Temperature Alloys
Trans. ASME. May 1958, 80(4): 929–939.
doi: https://doi.org/10.1115/1.4012566
Topics:
Alloys
,
High temperature
,
Stress
,
Grinding
,
Fluids
,
Grinding wheels
,
Aircraft
,
Design
,
Endurance limit
,
Gas turbines
General Design Considerations for Smaller Gas Turbines
Trans. ASME. May 1958, 80(4): 941–957.
doi: https://doi.org/10.1115/1.4012569
Topics:
Design
,
Gas turbines
,
Fuel consumption
,
Heat exchangers
,
Machinery
,
Military personnel and organizations
,
Propulsion
,
Vehicles
Formulations for the Thermodynamic Properties of Steam and Water
Trans. ASME. May 1958, 80(4): 959–966.
doi: https://doi.org/10.1115/1.4012572
Topics:
Steam
,
Water
,
ASME International Steam Tables for Industrial Use
,
Computers
,
Errors
,
Interpolation
The Formulation of Steam Properties for Digital Computer Application
Trans. ASME. May 1958, 80(4): 967–972.
doi: https://doi.org/10.1115/1.4012573
Topics:
Computers
,
Steam
,
Superheating
,
ASME International Steam Tables for Industrial Use
,
Enthalpy
,
Entropy
,
Errors
,
Vapors
Discussions and Closures
Discussion: “Boundary Layer Along Annular Walls in a Swirling Flow” (Yeh, Hsuan, 1958, Trans. ASME, 80, pp. 767–774)
Trans. ASME. May 1958, 80(4): 774–775.
doi: https://doi.org/10.1115/1.4012506
Topics:
Boundary layers
,
Swirling flow
Discussion: “Boundary Layer Along Annular Walls in a Swirling Flow” (Yeh, Hsuan, 1958, Trans. ASME, 80, pp. 767–774)
Trans. ASME. May 1958, 80(4): 775.
doi: https://doi.org/10.1115/1.4012507
Topics:
Boundary layers
,
Swirling flow
Discussion: “Boundary Layer Along Annular Walls in a Swirling Flow” (Yeh, Hsuan, 1958, Trans. ASME, 80, pp. 767–774)
Trans. ASME. May 1958, 80(4): 775–776.
doi: https://doi.org/10.1115/1.4012508
Topics:
Boundary layers
,
Swirling flow
Closure to “Discussions of ‘Boundary Layer Along Annular Walls in a Swirling Flow’” (1958, Trans. ASME, 80, pp. 774–776)
Trans. ASME. May 1958, 80(4): 776.
doi: https://doi.org/10.1115/1.4012509
Topics:
Boundary layers
,
Swirling flow
Discussion: “Stall Propagation in a Cascade of Airfoils” (Stenning, A. H., and Kriebel, A. R., 1958, Trans. ASME, 80, pp. 777–789)
Trans. ASME. May 1958, 80(4): 789–790.
doi: https://doi.org/10.1115/1.4012511
Topics:
Airfoils
,
Cascades (Fluid dynamics)
Closure to “Discussion of ‘Stall Propagation in a Cascade of Airfoils’” (1958, Trans. ASME, 80, pp. 789–790)
Trans. ASME. May 1958, 80(4): 790.
doi: https://doi.org/10.1115/1.4012512
Topics:
Cascades (Fluid dynamics)
Discussion: “Losses in Flow Normal to Plane Screens” (Cornell, W. G., 1958, Trans. ASME, 80, pp. 791–797)
Trans. ASME. May 1958, 80(4): 797–798.
doi: https://doi.org/10.1115/1.4012514
Topics:
Flow (Dynamics)
Discussion: “Losses in Flow Normal to Plane Screens” (Cornell, W. G., 1958, Trans. ASME, 80, pp. 791–797)
Trans. ASME. May 1958, 80(4): 798.
doi: https://doi.org/10.1115/1.4012515
Topics:
Flow (Dynamics)
Discussion: “Losses in Flow Normal to Plane Screens” (Cornell, W. G., 1958, Trans. ASME, 80, pp. 791–797)
Trans. ASME. May 1958, 80(4): 798.
doi: https://doi.org/10.1115/1.4012516
Topics:
Flow (Dynamics)
Discussion: “Losses in Flow Normal to Plane Screens” (Cornell, W. G., 1958, Trans. ASME, 80, pp. 791–797)
Trans. ASME. May 1958, 80(4): 798.
doi: https://doi.org/10.1115/1.4012517
Topics:
Flow (Dynamics)
Closure to “Discussions of ‘Losses in Flow Normal to Plane Screens’” (1958, Trans. ASME, 80, pp. 797–798)
Trans. ASME. May 1958, 80(4): 798–799.
doi: https://doi.org/10.1115/1.4012518
Topics:
Flow (Dynamics)
Discussion: “The Effect of Heat Conductance on Slider-Bearing Characteristics” (Guilinger, W. H., and Saibel, E. A., 1958, Trans. ASME, 80, pp. 800–804)
Trans. ASME. May 1958, 80(4): 804–805.
doi: https://doi.org/10.1115/1.4012520
Topics:
Slider bearings
,
Thermal conductivity
Discussion: “The Effect of Heat Conductance on Slider-Bearing Characteristics” (Guilinger, W. H., and Saibel, E. A., 1958, Trans. ASME, 80, pp. 800–804)
Trans. ASME. May 1958, 80(4): 805–806.
doi: https://doi.org/10.1115/1.4012522
Topics:
Slider bearings
,
Thermal conductivity
Closure to “Discussions of ‘The Effect of Heat Conductance on Slider-Bearing Characteristics’” (1958, Trans. ASME, 80, pp. 804–806)
Trans. ASME. May 1958, 80(4): 806.
doi: https://doi.org/10.1115/1.4012523
Topics:
Slider bearings
,
Thermal conductivity
Discussion: “Influence of Load and Thermal Distortion on the Design of Large Thrust Bearings” (Baudry, R. A., Kuhn, E. C., and Wise, W. W., 1958, Trans. ASME, 80, pp. 807–815)
Trans. ASME. May 1958, 80(4): 815–816.
doi: https://doi.org/10.1115/1.4012525
Topics:
Design
,
Stress
,
Thrust bearings
Discussion: “Influence of Load and Thermal Distortion on the Design of Large Thrust Bearings” (Baudry, R. A., Kuhn, E. C., and Wise, W. W., 1958, Trans. ASME, 80, pp. 807–815)
Trans. ASME. May 1958, 80(4): 816–817.
doi: https://doi.org/10.1115/1.4012528
Topics:
Design
,
Stress
,
Thrust bearings
Closure to “Discussions of ‘Influence of Load and Thermal Distortion on the Design of Large Thrust Bearings’” (1958, Trans. ASME, 80, pp. 815–817)
Trans. ASME. May 1958, 80(4): 817–818.
doi: https://doi.org/10.1115/1.4012530
Closure to “Discussions of ‘Oil Seals to Provide Positive Lubrication on Large or High-Speed Thrust Bearings’” (1958, Trans. ASME, 80, pp. 824–825)
Trans. ASME. May 1958, 80(4): 825.
doi: https://doi.org/10.1115/1.4012535
Topics:
Lubrication
,
Thrust
Closure to “Discussions of ‘Theoretical and Experimental Analysis of Hydrodynamic Gas-Lubricated Journal Bearings’” (1958, Trans. ASME, 80, pp. 875–877)
Trans. ASME. May 1958, 80(4): 877–878.
doi: https://doi.org/10.1115/1.4012545
Topics:
Experimental analysis
Discussion: “The Variable Fluid-Property Problem in Free Convection” (Sparrow, E. M., and Gregg, J. L., 1958, Trans. ASME, 80, pp. 879–886)
Trans. ASME. May 1958, 80(4): 886.
doi: https://doi.org/10.1115/1.4012547
Topics:
Fluids
,
Natural convection
Closure to “Discussion of ‘The Variable Fluid-Property Problem in Free Convection’” (1958, Trans. ASME, 80, p. 886)
Trans. ASME. May 1958, 80(4): 886.
doi: https://doi.org/10.1115/1.4012548
Topics:
Fluids
Discussion: “The Effect of Conduit Dynamics on Control-Valve Stability” (Ezekiel, F. D., 1958, Trans. ASME, 80, pp. 904–908)
Trans. ASME. May 1958, 80(4): 908.
doi: https://doi.org/10.1115/1.4012552
Topics:
Dynamics (Mechanics)
,
Stability
,
Valves
Discussion: “The Effect of Conduit Dynamics on Control-Valve Stability” (Ezekiel, F. D., 1958, Trans. ASME, 80, pp. 904–908)
Trans. ASME. May 1958, 80(4): 908.
doi: https://doi.org/10.1115/1.4012553
Topics:
Dynamics (Mechanics)
,
Stability
,
Valves
Closure to “Discussions of ‘The Effect of Conduit Dynamics on Control-Valve Stability’” (1958, Trans. ASME, 80, p. 908)
Trans. ASME. May 1958, 80(4): 908.
doi: https://doi.org/10.1115/1.4012554
Topics:
Dynamics (Mechanics)
,
Valves
Discussion: “Resistance to Rolling and Sliding” (Dunk, A. C., and Hall, Jr., A. S., 1958, Trans. ASME, 80, pp. 915–919)
Trans. ASME. May 1958, 80(4): 919.
doi: https://doi.org/10.1115/1.4012558
Discussion: “Resistance to Rolling and Sliding” (Dunk, A. C., and Hall, Jr., A. S., 1958, Trans. ASME, 80, pp. 915–919)
Trans. ASME. May 1958, 80(4): 919.
doi: https://doi.org/10.1115/1.4012559
Closure to “Discussions of ‘Resistance to Rolling and Sliding’” (1958, Trans. ASME, 80, p. 919)
Trans. ASME. May 1958, 80(4): 920.
doi: https://doi.org/10.1115/1.4012560
Discussion: “Comparison of Semi-Empirical Solutions for Crack Propagation With Experiments” (Frisch, J., 1958, Trans. ASME, 80, pp. 921–926)
Trans. ASME. May 1958, 80(4): 926.
doi: https://doi.org/10.1115/1.4012562
Topics:
Crack propagation
Discussion: “Comparison of Semi-Empirical Solutions for Crack Propagation With Experiments” (Frisch, J., 1958, Trans. ASME, 80, pp. 921–926)
Trans. ASME. May 1958, 80(4): 926–927.
doi: https://doi.org/10.1115/1.4012563
Topics:
Crack propagation
Discussion: “Comparison of Semi-Empirical Solutions for Crack Propagation With Experiments” (Frisch, J., 1958, Trans. ASME, 80, pp. 921–926)
Trans. ASME. May 1958, 80(4): 927.
doi: https://doi.org/10.1115/1.4012564
Topics:
Crack propagation
Closure to “Discussions of ‘Comparison of Semi-Empirical Solutions for Crack Propagation With Experiments’” (1958, Trans. ASME, 80, pp. 926–927)
Trans. ASME. May 1958, 80(4): 927–928.
doi: https://doi.org/10.1115/1.4012565
Topics:
Crack propagation
Discussion: “Analysis of Residual Stress in Ground Surfaces of High-Temperature Alloys” (Halverstadt, R. D., 1958, Trans. ASME, 80, pp. 929–939)
Trans. ASME. May 1958, 80(4): 939–940.
doi: https://doi.org/10.1115/1.4012567
Topics:
Alloys
,
High temperature
,
Stress
Closure to “Discussion of ‘Analysis of Residual Stress in Ground Surfaces of High-Temperature Alloys’” (1958, Trans. ASME, 80, pp. 939–940)
Trans. ASME. May 1958, 80(4): 940.
doi: https://doi.org/10.1115/1.4012568
Topics:
High temperature
,
Stress
Discussion: “General Design Considerations for Smaller Gas Turbines” (Von Der Nuell, W. T., 1958, Trans. ASME, 80, pp. 941–957)
Trans. ASME. May 1958, 80(4): 957–958.
doi: https://doi.org/10.1115/1.4012570
Topics:
Design
,
Gas turbines
Closure to “Discussion of ‘General Design Considerations for Smaller Gas Turbines’” (1958, Trans. ASME, 80, pp. 957–958)
Trans. ASME. May 1958, 80(4): 958.
doi: https://doi.org/10.1115/1.4012571
Topics:
Design
Email alerts
RSS Feeds
Experimental Investigation of the Effect of Rake on a Bluff Body Equipped With a Diffuser
J. Fluids Eng (April 2025)