The reliability of fine pitch Sn–3.8Ag–0.7Cu flip chip solder joints with three different pads, i.e., bare pads, pads with solder masks, and pads with microvia, on printed circuit boards (PCBs) was studied through thermal cycling. After assembly, (Au,Ni)Sn4 intermetallics (IMCs) formed both in the bulk solder and at the interfaces due to the immersion-Au finish on the PCB side. The (Au,Ni)Sn4 IMCs formed in the solder joints on the pads with microvia were more abundant than those formed in the solder joints on the pads without microvia. The results showed that the solder joints on the pads with a microvia had poor reliability due to the insufficient solder volume and the formation of large amounts of (Au,Ni)Sn4 IMCs. The main crack initiation position was the corner of solder joint at the chip side. For the pads with microvia, the main location of failure was at the (Au,Ni)Sn4/solder interface on the chip side, and for the solder joints on bare pads and pads with solder mask, the possible failure location was in the bulk solder.

1.
Li
,
D. Z.
,
Liu
,
C. Q.
, and
Conway
,
P. P.
, 2005, “
Characteristics of Intermetallics and Micromechanical Properties During Thermal Ageing of Sn–Ag–Cu Flip-Chip Solder Interconnects
,”
Mater. Sci. Eng., A
0921-5093,
391
(
1–2
), pp.
95
103
.
2.
Hou
,
Z.
,
Tian
,
G.
,
Hatcher
,
G.
,
Johnson
,
R. W.
,
Yaeger
,
E. K.
,
Konarski
,
M. M.
, and
Crane
,
L.
, 2001, “
Lead-Free Solder Flip Chip-on-Laminate Assembly and Reliability
,”
IEEE Trans. Electron. Packag. Manuf.
1521-334X,
24
(
4
), pp.
282
292
.
3.
Stepniak
,
F.
, 2001, “
Conversion of the Under Bump Metallurgy Into Intermetallics: The Impact on Flip Chip Reliability
,”
Microelectron. Reliab.
0026-2714,
41
, pp.
735
744
.
4.
Schubert
,
A.
,
Dudek
,
R.
,
Walter
,
H.
,
Jung
,
E.
,
Gollhardt
,
A.
,
Michel
,
B.
, and
Reichl
,
H.
, 2002, “
Reliability Assessment of Flip-Chip Assemblies With Lead-Free Solder Joints
,”
Proceedings of the 52nd Electronic Components and Technology Conference
,
San Diego, CA
, May 28–31, pp.
1246
1255
.
5.
Balkan
,
H.
,
Patterson
,
D.
,
Burgess
,
G.
,
Carlson
,
C.
, and
Elenius
,
P.
, 2002, “
Flip-Chip Reliability: Comparative Characterization of Lead Free (Sn∕Ag∕Cu) and 63Sn∕Pb Eutectic Solder
,”
Proceedings of the 52nd Electronic Components and Technology Conference
,
San Diego, CA
, May 28–31, pp.
1263
1269
.
6.
Nurmi
,
S.
,
Sundelin
,
J.
,
Ristolainen
,
E.
, and
Lepisto
,
T.
, 2004, “
The Effect of Solder Paste Composition on the Reliability of Snagcu Joints
,”
Microelectron. Reliab.
0026-2714,
44
(
3
), pp.
485
494
.
7.
Taguchi
,
T.
,
Kato
,
R.
,
Akita
,
S.
,
Okuno
,
A.
,
Suzuki
,
H.
, and
Okuno
,
T.
, 2001, “
Lead Free Interfacial Structures and Their Relationship to Au Plating (Including Accelerated Thermal Cycle Testing of Non-Leaden Ega Spheres)
,”
Proceedings of the 51st Electronic Components and Technology Conference
,
Orlando, FL
, May 29–31, pp.
675
680
.
8.
Huang
,
M. L.
,
Wu
,
C. M. L.
,
Lai
,
J. K. L.
, and
Chan
,
Y. C.
, 2000, “
Microstructural Evolution of a Lead-Free Solder Alloy Sn–Bi–Ag–Cu Prepared by Mechanical Alloying During Thermal Shock and Aging
,”
J. Electron. Mater.
0361-5235,
29
(
8
), pp.
1021
1026
.
9.
Moreau
,
S.
,
Lequeu
,
T.
, and
Jerisian
,
R.
, 2004, “
Comparative Study of Thermal Cycling and Thermal Shocks Tests on Electronic Components Reliability
,”
Microelectron. Reliab.
0026-2714,
44
(
9–11
), pp.
1343
1347
.
10.
Tu
,
P. L.
,
Chan
,
Y. C.
, and
Lai
,
J. K. L.
, 1997, “
Effect of Intermetallic Compounds on the Thermal Fatigue of Surface Mount Solder Joints
,”
IEEE Trans. Compon., Packag. Manuf. Technol., Part B
1070-9894,
20
(
1
), pp.
87
93
.
11.
Amagai
,
M.
,
Toyoda
,
Y.
, and
Tajima
,
T.
, 2003, “
High Solder Joint Reliability With Lead Free Solders
,”
Proceedings of the 53rd Electronic Components and Technology Conference
,
New Orleans, LA
, May 27–31, pp.
317
322
.
12.
Lee
,
K. Y.
,
Li
,
M.
, and
Tu
,
K. N.
, 2003, “
Growth and Ripening of (Au,Ni)Sn4 Phase in Pb-Free and Pb-Containing Solders on Ni∕Au Metallization
,”
J. Mater. Res.
0884-2914,
18
(
11
), pp.
2562
2570
.
13.
Chen
,
L.
,
Zhang
,
Q.
,
Wang
,
G. Z.
,
Xie
,
X. M.
, and
Cheng
,
Z. N.
, 2001, “
The Effects of Underfill and Its Material Models on Thermomechanical Behaviors of a Flip Chip Package
,”
IEEE Trans. Adv. Packag.
1521-3323,
24
(
1
), pp.
17
24
.
14.
Chung
,
C. K.
,
Aspandiar
,
R.
,
Leong
,
K. F.
, and
Tay
,
C. S.
, 2002, “
The Interactions of Lead (Pb) in Lead Free Solder (Sn∕Ag∕Cu) System
,”
Proceedings of the 52nd Electronic Components and Technology Conference
,
San Diego, CA
, May 28–31, pp.
168
175
.
15.
Wiegele
,
S.
,
Thompson
,
P.
,
Lee
,
R.
, and
Ramsland
,
E.
, 1998, “
Reliability and Process Characterization of Electroless Nickel-Gold/Solder Flip Chip Interconnect Technology
,”
Proceedings of the 48th Electronic Components and Technology Conference
,
Seattle, WA
, May 25, pp.
861
866
.
You do not currently have access to this content.