Skip Nav Destination
Issues
April 2013
This article was originally published in
Journal of Fuel Cell Science and Technology
ISSN 1550-624X
EISSN 1551-6989
In this Issue
Research Papers
Simulation of Surface Reactions and Multiscale Transport Processes in a Composite Anode Domain Relevant for Solid Oxide Fuel Cells
J. Fuel Cell Sci. Technol. April 2013, 10(2): 021001.
doi: https://doi.org/10.1115/1.4023540
Topics:
Anodes
,
Flow (Dynamics)
,
Methane
,
Solid oxide fuel cells
,
Transport processes
,
Water
,
Composite materials
,
Gaseous fuels
,
Heat
,
Fuels
Classification and Fault Detection Methods for Fuel Cell Monitoring and Quality Control
J. Fuel Cell Sci. Technol. April 2013, 10(2): 021002.
doi: https://doi.org/10.1115/1.4023565
Topics:
Flaw detection
,
Fuel cells
,
Magnetic fields
,
Quality control
,
Currents
Catalytic Steam Reforming of Glycerol Over Cerium and Palladium-Based Catalysts for Hydrogen Production
J. Fuel Cell Sci. Technol. April 2013, 10(2): 021003.
doi: https://doi.org/10.1115/1.4023687
Topics:
Catalysts
,
Hydrogen production
,
Steam reforming
Evaluation of Protective La0.67Sr0.33MnO3–δ Coatings on Various Stainless Steels Used for Solid Oxide Fuel Cell Interconnects
J. Fuel Cell Sci. Technol. April 2013, 10(2): 021004.
doi: https://doi.org/10.1115/1.4023579
Topics:
Alloys
,
Coatings
,
Solid oxide fuel cells
,
Stainless steel
,
Sputtering (Irradiation)
,
Temperature
Effect of Gas Diffusion Layer With Double-Side Microporous Layer Coating on Polymer Electrolyte Membrane Fuel Cell Performance
J. Fuel Cell Sci. Technol. April 2013, 10(2): 021005.
doi: https://doi.org/10.1115/1.4023841
Effects of Polymer Binder in Electrolyte Slurries and Their Microtubular SOFC Applications
J. Fuel Cell Sci. Technol. April 2013, 10(2): 021006.
doi: https://doi.org/10.1115/1.4023541
Topics:
Binders (Materials)
,
Electrolytes
,
Polymers
,
Slurries
,
Solid oxide fuel cells
Crack Formation in Membrane Electrode Assembly Under Static and Cyclic Loadings
J. Fuel Cell Sci. Technol. April 2013, 10(2): 021007.
doi: https://doi.org/10.1115/1.4023878
Three-Dimensional Simulation-Based Optimum Design of Direct Methanol Fuel Cell System
J. Fuel Cell Sci. Technol. April 2013, 10(2): 021008.
doi: https://doi.org/10.1115/1.4023836
Topics:
Anodes
,
Current density
,
Design
,
Direct methanol fuel cells
,
Fuel cells
,
Methanol
,
Optimization
,
Power density
,
Catalysts
,
Membranes
Modeling Studies of Tubular SOFCs for Transportation Markets
J. Fuel Cell Sci. Technol. April 2013, 10(2): 021009.
doi: https://doi.org/10.1115/1.4023844
Topics:
Anodes
,
Current density
,
Density
,
Diffusion (Physics)
,
Electrodes
,
Fuels
,
Modeling
,
Solid oxide fuel cells
,
Testing
,
Transportation systems
Email alerts
RSS Feeds
State of health estimation method for Lithium-ion batteries based on multi-feature fusion and BO-BiGRU model
J. Electrochem. En. Conv. Stor
A Fault Diagnosis Method for Electric Vehicle Lithium Power Batteries Based on Dual-Feature Extraction From the Time and Frequency Domains
J. Electrochem. En. Conv. Stor (August 2025)
Optimization of thermal non-uniformity challenges in liquid-cooled lithium-ion battery packs using NSGA-II
J. Electrochem. En. Conv. Stor
Ultrasound-enabled adaptive protocol for fast charging of lithium-ion batteries
J. Electrochem. En. Conv. Stor
Effects of Sintering Temperature on the Electrical Performance of Ce0.8Sm0.2O1.9–Pr2NiO4 Composite Electrolyte for SOFCs
J. Electrochem. En. Conv. Stor (August 2025)
