The validity and accuracy of a high-fidelity mechanistic multibody model of a vertical piano action mechanism is examined experimentally and through simulation. An overview of the theoretical and computational framework of this previously presented model is given first. A dynamically realistic benchtop prototype mechanism was constructed and driven by a mechanical actuator pressing the key. For simulations, a parameterization based on geometric and dynamic component properties and configuration is used; initial conditions are established by a virtual regulation that mimics a piano technician's procedure. The motion of each component is obtained experimentally by high-speed imaging and automated tracking. Simulated response is shown to accurately represent that of the real action for two different (pressed) key inputs using a single fixed parameterization. Various specialized model features are separately evaluated. Proper simulated dynamic behavior supports the accuracy of the friction representation; this is especially so for softer key inputs which demand a more actively controlled playing technique. The accuracy of the contact model is confirmed by the proper timing and function of the mechanism, as the relationship between components is strongly dependent on the state of compression of the interface between them. The value of including three flexible components is weighed against their significant computational cost. Compared to a rigid fixed ground point target, hammer impact on a compliant string reduces impact force, contact duration, and postimpact hammer velocity to improve accuracy. Flexibility of the backcheck wire and hammer shank also strongly affects postimpact behavior of the mechanism. The sophisticated balance pivot model is seen to be valuable in creating a realistic key response, with compression of felt balance punching and lift-off of the key, very important for achieving the proper key–hammer relationship. Finally, two components unique to the vertical mechanism—the bridle strap and butt spring—are shown to be essential in controlling the hammer for detached key inputs, where the key is released before it has reached the front punching. Accurate postimpact response is important for proper simulation of repeated notes, as well as the “feel” of the action. In general, the results reported can be considered as a validation of the method for constructing and parameterizing a dynamically accurate multibody model of a specific prototype mechanism or system including compliant contacts and flexibility of some components, as well as ad hoc components to cover unusual dynamic behavior.
Skip Nav Destination
Article navigation
November 2015
Research-Article
Experimental Validation of a Mechanistic Multibody Model of a Vertical Piano Action
Ramin Masoudi,
Ramin Masoudi
1
Department of Systems Design Engineering,
e-mail: rmasoudi@uwaterloo.ca
University of Waterloo
,Waterloo, ON N2L 3G1
, Canada
e-mail: rmasoudi@uwaterloo.ca
1Corresponding author.
Search for other works by this author on:
Stephen Birkett
Stephen Birkett
Associate Professor
Department of Systems Design Engineering,
e-mail: sbirkett@uwaterloo.ca
Department of Systems Design Engineering,
University of Waterloo
,Waterloo, ON N2L 3G1
, Canada
e-mail: sbirkett@uwaterloo.ca
Search for other works by this author on:
Ramin Masoudi
Department of Systems Design Engineering,
e-mail: rmasoudi@uwaterloo.ca
University of Waterloo
,Waterloo, ON N2L 3G1
, Canada
e-mail: rmasoudi@uwaterloo.ca
Stephen Birkett
Associate Professor
Department of Systems Design Engineering,
e-mail: sbirkett@uwaterloo.ca
Department of Systems Design Engineering,
University of Waterloo
,Waterloo, ON N2L 3G1
, Canada
e-mail: sbirkett@uwaterloo.ca
1Corresponding author.
Contributed by the Design Engineering Division of ASME for publication in the JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS. Manuscript received April 4, 2014; final manuscript received July 28, 2014; published online April 9, 2015. Assoc. Editor: Parviz Nikravesh.
J. Comput. Nonlinear Dynam. Nov 2015, 10(6): 061004 (11 pages)
Published Online: November 1, 2015
Article history
Received:
April 4, 2014
Revision Received:
July 28, 2014
Online:
April 9, 2015
Citation
Masoudi, R., and Birkett, S. (November 1, 2015). "Experimental Validation of a Mechanistic Multibody Model of a Vertical Piano Action." ASME. J. Comput. Nonlinear Dynam. November 2015; 10(6): 061004. https://doi.org/10.1115/1.4028194
Download citation file:
Get Email Alerts
Cited By
A numerical study for nonlinear time-space fractional reaction-diffusion model of fourth-order
J. Comput. Nonlinear Dynam
A Fast Chebyshev Collocation Method for Stability Analysis of a Robotic Machining System with Time Delay
J. Comput. Nonlinear Dynam
Characterization of Three-Mode Combination Internal Resonances in Electrostatically Actuated Flexible–Flexible Microbeams
J. Comput. Nonlinear Dynam (December 2024)
Investigation of nonlinear dynamic behaviors of vertical rotor system supported by aerostatic bearings
J. Comput. Nonlinear Dynam
Related Articles
Dynamic Modeling and Experimental Testing of a Piano Action Mechanism
J. Comput. Nonlinear Dynam (January,2006)
Dynamic Responses of a Self-Moving Precision Positioning Stage Impacted by a Spring-Mounted Piezoelectric Actuator
J. Dyn. Sys., Meas., Control (December,2003)
Analytical and Numerical Investigations of Stable Periodic Solutions of the Impacting Oscillator With a Moving Base and Two Fenders
J. Comput. Nonlinear Dynam (November,2017)
A Mechanistic Multibody Model for Simulating the Dynamics of a Vertical Piano Action
J. Comput. Nonlinear Dynam (July,2014)
Related Proceedings Papers
Related Chapters
Room-Temperature Stress Relaxation of High-Strength Strip and Wire Spring Steels—Procedures and Data
Stress Relaxation Testing
Experimental Research of Dynamic Parameters of Stranded-Wire Helical Springs under Impact Load
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)
Development of Impacting Fatigue Test Device of Stranded Wires Helical Springs
International Conference on Information Technology and Management Engineering (ITME 2011)