A cartilage growth mixture (CGM) model is proposed to address limitations of a model used in a previous study. New stress constitutive equations for the solid matrix are derived and collagen (COL) remodeling is incorporated into the CGM model by allowing the intrinsic COL material constants to evolve during growth. An analytical validation protocol based on experimental data from a recent in vitro growth study is developed. Available data included measurements of tissue volume, biochemical composition, and tensile modulus for bovine calf articular cartilage (AC) explants harvested at three depths and incubated for in 20% fetal borine serum (FBS) and 20% -aminopropionitrile. The proposed CGM model can match tissue biochemical content and volume exactly while predicting theoretical values of tensile moduli that do not significantly differ from experimental values. Also, theoretical values of a scalar COL remodeling factor are positively correlated with COL cross-link content, and mass growth functions are positively correlated with cell density. The results suggest that the CGM model may help us to guide in vitro growth protocols for AC tissue via the a priori prediction of geometric and biomechanical properties.
Skip Nav Destination
Article navigation
June 2008
Research Papers
A Cartilage Growth Mixture Model With Collagen Remodeling: Validation Protocols
Stephen M. Klisch,
Stephen M. Klisch
Associate Professor
Department of Mechanical Engineering,
California Polytechnic State University
, San Luis Obispo, CA 93407
Search for other works by this author on:
Anna Asanbaeva,
Anna Asanbaeva
Department of Bioengineering, and Whitaker Institute of Biomedical Engineering,
University of California-San Diego
, La Jolla, CA 92093
Search for other works by this author on:
Sevan R. Oungoulian,
Sevan R. Oungoulian
Department of Mechanical Engineering,
California Polytechnic State University
, San Luis Obispo, CA 93407
Search for other works by this author on:
Koichi Masuda,
Koichi Masuda
Departments of Orthopedic Surgery and Biochemistry,
Rush University Medical Center
, Chicago, IL 60612
Search for other works by this author on:
Eugene J.-MA. Thonar,
Eugene J.-MA. Thonar
Departments of Orthopedic Surgery and Biochemistry, and Department of Internal Medicine,
Rush University Medical Center
, Chicago, IL 60612
Search for other works by this author on:
Andrew Davol,
Andrew Davol
Departments of Mechanical Engineering,
California Polytechnic State University
, San Luis Obispo, CA 93407
Search for other works by this author on:
Robert L. Sah
Robert L. Sah
Department of Bioengineering, and Whitaker Institute of Biomedical Engineering,
University of California-San Diego
, La Jolla, CA 92093
Search for other works by this author on:
Stephen M. Klisch
Associate Professor
Department of Mechanical Engineering,
California Polytechnic State University
, San Luis Obispo, CA 93407
Anna Asanbaeva
Department of Bioengineering, and Whitaker Institute of Biomedical Engineering,
University of California-San Diego
, La Jolla, CA 92093
Sevan R. Oungoulian
Department of Mechanical Engineering,
California Polytechnic State University
, San Luis Obispo, CA 93407
Koichi Masuda
Departments of Orthopedic Surgery and Biochemistry,
Rush University Medical Center
, Chicago, IL 60612
Eugene J.-MA. Thonar
Departments of Orthopedic Surgery and Biochemistry, and Department of Internal Medicine,
Rush University Medical Center
, Chicago, IL 60612
Andrew Davol
Departments of Mechanical Engineering,
California Polytechnic State University
, San Luis Obispo, CA 93407
Robert L. Sah
Department of Bioengineering, and Whitaker Institute of Biomedical Engineering,
University of California-San Diego
, La Jolla, CA 92093J Biomech Eng. Jun 2008, 130(3): 031006 (11 pages)
Published Online: April 25, 2008
Article history
Received:
January 22, 2007
Revised:
December 12, 2007
Published:
April 25, 2008
Citation
Klisch, S. M., Asanbaeva, A., Oungoulian, S. R., Masuda, K., Thonar, E. J., Davol, A., and Sah, R. L. (April 25, 2008). "A Cartilage Growth Mixture Model With Collagen Remodeling: Validation Protocols." ASME. J Biomech Eng. June 2008; 130(3): 031006. https://doi.org/10.1115/1.2907754
Download citation file:
Get Email Alerts
Simulating the Growth of TATA-Box Binding Protein-Associated Factor 15 Inclusions in Neuron Soma
J Biomech Eng (December 2024)
Effect of Structure and Wearing Modes on the Protective Performance of Industrial Safety Helmet
J Biomech Eng (December 2024)
Sex-Based Differences and Asymmetry in Hip Kinematics During Unilateral Extension From Deep Hip Flexion
J Biomech Eng (December 2024)
Related Articles
The Role of Mass Balance Equations in Growth Mechanics Illustrated in Surface and Volume Dissolutions
J Biomech Eng (January,2011)
A Growth Mixture Theory for Cartilage With Application to Growth-Related Experiments on Cartilage Explants
J Biomech Eng (April,2003)
Simulating the Growth of Articular Cartilage Explants in a Permeation Bioreactor to Aid in Experimental Protocol Design
J Biomech Eng (April,2009)
Periodic Nanomechanical Stimulation in a Biokinetics Model Identifying Anabolic and Catabolic Pathways Associated With Cartilage Matrix Homeostasis
J. Nanotechnol. Eng. Med (November,2010)
Related Proceedings Papers
Related Chapters
Effects of Ultrasound Stimulation on Chondrocytes in Three-Dimensional Culture in Relation to the Production of Regenerative Cartilage Tissue
Biomedical Applications of Vibration and Acoustics in Therapy, Bioeffect and Modeling
Experimental Studies
Nanoparticles and Brain Tumor Treatment
Characterization and evaluation
Biocompatible Nanomaterials for Targeted and Controlled Delivery of Biomacromolecules