Mineralized collagen fibrils are the basic building blocks of bone tissue at the supramolecular level. Several disease states, manipulation of the expression of specific proteins involved in biomineralization, and treatment with different agents alter the extent of mineralization as well as the morphology of mineral crystals which in turn affect the mechanical function of bone tissue. An experimental assessment of mineralized fibers’ mechanical properties is challenged by their small size, leaving analytical and computational models as a viable alternative for investigation of the fibril-level mechanical properties. In the current study the variation of the elastic stiffness tensor of mineralized collagen fibrils with changing mineral volume fraction and mineral aspect ratios was predicted via a micromechanical model. The partitioning of applied stresses between mineral and collagen phases is also predicted for normal and shear loading of fibrils. Model predictions resulted in transversely isotropic collagen fibrils in which the modulus along the longer axis of the fibril was the greatest. All the elastic moduli increased with increasing mineral volume fraction whereas Poisson’s ratios decreased with the exception of . The partitioning of applied stresses were such that the stresses acting on mineral crystals were about 1.5, 15, and 3 times greater than collagen stresses when fibrils were loaded transversely, longitudinally, and in shear, respectively. In the overall the predictions were such that: (a) greatest modulus along longer axis; (b) the greatest mineral/collagen stress ratio along the longer axis of collagen fibers (i.e., greatest relief of stresses acting on collagen); and (c) minimal lateral contraction when fibers are loaded along the longer axis. Overall, the pattern of mineralization as put forth in this model predicts a superior mechanical function along the longer axis of collagen fibers, the direction which is more likely to experience greater stresses.
Skip Nav Destination
Article navigation
June 2005
Technical Papers
Elastic Deformation of Mineralized Collagen Fibrils: An Equivalent Inclusion Based Composite Model
Ozan Akkus
Ozan Akkus
Ph.DDepartment of Bioengineering,
The University of Toledo
, 2801 W. Bancroft St., Mail Stop 303, Toledo, OH 43606-3390
Search for other works by this author on:
Ozan Akkus
Ph.DDepartment of Bioengineering,
The University of Toledo
, 2801 W. Bancroft St., Mail Stop 303, Toledo, OH 43606-3390J Biomech Eng. Jun 2005, 127(3): 383-390 (8 pages)
Published Online: January 31, 2005
Article history
Received:
August 19, 2004
Revised:
November 29, 2004
Accepted:
January 31, 2005
Citation
Akkus, O. (January 31, 2005). "Elastic Deformation of Mineralized Collagen Fibrils: An Equivalent Inclusion Based Composite Model." ASME. J Biomech Eng. June 2005; 127(3): 383–390. https://doi.org/10.1115/1.1894204
Download citation file:
Get Email Alerts
Related Articles
Nanostructural Alteration in Bone Quantified in Terms of Orientation Distribution of Mineral Crystals: A Possible Tool for Fracture Risk Assessment
J Biomech Eng (December,2011)
Sensitivity of Multiple Damage Parameters to Compressive Overload in
Cortical Bone
J Biomech Eng (August,2005)
Effect of Bone Mineral Content on the Tensile Properties of Cortical Bone: Experiments and Theory
J Biomech Eng (December,2003)
The Role of Mass Balance Equations in Growth Mechanics Illustrated in Surface and Volume Dissolutions
J Biomech Eng (January,2011)
Related Proceedings Papers
Related Chapters
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design
Novel and Efficient Mathematical and Computational Methods for the Analysis and Architecting of Ultralight Cellular Materials and their Macrostructural Responses
Advances in Computers and Information in Engineering Research, Volume 2
Times to Hard Boil Different Sized Chicken Eggs
Case Studies in Transient Heat Transfer With Sensitivities to Governing Variables