Statistical models for predicting failure probability of brittle materials are investigated. A formula is derived from a physical consideration for the fracture of microcracks in materials based on the general forms of a fracture criterion and a statistical distribution function incorporating the weakest link principle. The relationships of this model and other statistical models in the literature are discussed; they were found to be equivalent for isotropic materials in which microcracks are randomly distributed in all directions. The statistical model is also used in a failure analysis of the round-notch four-point bending specimen made of an AISI 1008 steel. The grain boundary carbide particles are considered to be microcracks in the plastic zone near the notch tip. The distribution function in the statistical theory is derived from the density and size distribution of carbide particles in the steel. The statistical theory for a triaxial stress state is used to predict the failure probability for any given load on the specimen. The failure loads (loads corresponding to 50 percent of failure probability) are calculated for the specimen at different temperatures. The results are compared with experimental data; good agreement is obtained.
Skip Nav Destination
Article navigation
March 1991
Research Papers
Statistical Theory for Predicting the Failure of Brittle Materials
S. She,
S. She
Department of Engineering Science and Mechanics, University of Tennessee, Knoxville, TN 37996
Search for other works by this author on:
J. D. Landes,
J. D. Landes
Department of Engineering Science and Mechanics, University of Tennessee, Knoxville, TN 37996
Search for other works by this author on:
J. A. M. Boulet,
J. A. M. Boulet
Department of Engineering Science and Mechanics, University of Tennessee, Knoxville, TN 37996
Search for other works by this author on:
J. E. Stoneking
J. E. Stoneking
Department of Engineering Science and Mechanics, University of Tennessee, Knoxville, TN 37996
Search for other works by this author on:
S. She
Department of Engineering Science and Mechanics, University of Tennessee, Knoxville, TN 37996
J. D. Landes
Department of Engineering Science and Mechanics, University of Tennessee, Knoxville, TN 37996
J. A. M. Boulet
Department of Engineering Science and Mechanics, University of Tennessee, Knoxville, TN 37996
J. E. Stoneking
Department of Engineering Science and Mechanics, University of Tennessee, Knoxville, TN 37996
J. Appl. Mech. Mar 1991, 58(1): 43-49 (7 pages)
Published Online: March 1, 1991
Article history
Received:
June 6, 1989
Revised:
June 20, 1990
Online:
March 31, 2008
Citation
She, S., Landes, J. D., Boulet, J. A. M., and Stoneking, J. E. (March 1, 1991). "Statistical Theory for Predicting the Failure of Brittle Materials." ASME. J. Appl. Mech. March 1991; 58(1): 43–49. https://doi.org/10.1115/1.2897177
Download citation file:
Get Email Alerts
Sound Mitigation by Metamaterials With Low-Transmission Flat Band
J. Appl. Mech (January 2025)
Deformation-Dependent Effective Vascular Permeability of a Biological Tissue Containing Parallel Microvessels
J. Appl. Mech (January 2025)
Mechanics of a Tunable Bistable Metamaterial With Shape Memory Polymer
J. Appl. Mech (January 2025)
Related Articles
Capturing the Temperature Dependence of Cleavage Fracture Toughness in the Ductile-to-Brittle Transition Regime in Ferritic Steels Using an Improved Engineering Local Approach
J. Pressure Vessel Technol (June,2022)
Failure Analysis of a 9–12%Cr Steel Superheater Tube
J. Pressure Vessel Technol (December,2009)
Improved Form of a Fracture Mechanics Based Failure Probability Model for Brittle Materials
J. Appl. Mech (July,2005)
Microcracking in Polycrystalline Solids
J. Eng. Mater. Technol (April,1988)
Related Proceedings Papers
Related Chapters
In Situ Observations of the Failure Mechanisms of Hydrided Zircaloy-4
Zirconium in the Nuclear Industry: 20th International Symposium
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design
Failure Analysis to Unambiguously Clarify Hydrogen Fracturing in Steels
International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments