0
Select Articles

# At the IntersectionPUBLIC ACCESS

As Industry Makes Large Investments in Gas Turbine Technology, Advanced Manufacturing will Play an Important Role in Improving Performance and Reducing Costs.

[+] Author Notes

Timothy C. Lieuwen, an ASME Fellow, is professor in the School of Aerospace Engineering, and executive director of the Strategic Energy Institute, at the Georgia Institute of Technology in Atlanta.

Karen A. Thole, also an ASME Fellow, is a professor and head of the Department Mechanical and Nuclear Engineering at Pennsylvania State University in State College.

Mechanical Engineering 138(06), 34-37 (Jun 01, 2016) (4 pages) Paper No: ME-16-JUN2; doi: 10.1115/1.2016-Jun-2

## Abstract

This article highlights the role that advanced manufacturing will play as industry makes large investments. Advanced manufacturing can play a pivotal role in improving performance and reducing costs. This manufacturing may enable higher turbine inlet temperatures, new materials and coatings, improved cooling, and better sealing and three-dimensional aerodynamics to reduce losses. It can also achieve increased performance and operability through the integration of sensors in turbine components. The certification processes for components also needs attention. Without clear policies, the tremendous opportunities for the aftermarket repair business may result in intellectual property battles where lines can easily be blurred given the digitization of parts. Redesigning turbine airfoils presents tremendous opportunities to route valuable cooling air to regions where it was not previously possible to cool in an effective manner. The gas turbine is poised to become the most important thermal energy and propulsion device in the 21st century. Advanced manufacture will significantly alter how gas turbines are made and perhaps how they operate.

## Article

This titanium housing produced by Rolls-Royce is the largest jet engine component ever to be 3-D printed.

Gas turbines are taking off. Jet aircraft powered by gas turbines have long been the star of the long-haul passenger transportation system in the United States and around the world. And over the last decade, as new power generating capacity has been added to the electric system, gas turbines (along with wind turbines) also have become the dominant technology in the power industry—and are positioned to continue their dominance. The U.S. Energy Information Administration projects that roughly 60 percent of new power generation capacity between today and 2035 will be supplied by combined cycle gas turbine plants.

A variety of factors have contributed to the new prominence of gas turbine technology in the power industry. In the United States, for instance, natural gas production from shale formations has led to a steep reduction in gas prices in the last 10 years.

Gas turbine generating facilities create little pollution—emitting no sulfur oxides, low levels of nitrogen oxides and particulates, and less than half the carbon dioxide per MWh of a coal-fired plant. Because gas turbine power plants are less of a burden on surrounding areas, they can be sited, permitted, and built quickly, which lowers the cost of financing the construction. And due to their rapid transient response capabilities, gas turbines play an important role in supplying power to even out variations in renewable power, especially solar and wind.

The intersection of gas turbines for power generation and aviation with advanced manufacturing is creating exciting opportunities. New gas turbine designs that take advantage of advanced manufacturing techniques will enable quicker time to market with lower costs and improved performance.

This intersection also is creating exciting opportunities for aftermarket businesses through the potential of rapid repairs, refurbishments, and spare parts on demand.

## Impact on Efficiency

The value from those new manufacturing techniques and non-traditional materials applied to gas turbines can come from reduced development times, cost of the part, and performance. Coupled with new integrated design and manufacturing tools, advanced manufacturing promises to enable engineers to create solutions that would have been impossible to conceive of a decade ago.

Take for example the challenge of further increasing the efficiency and performance of gas turbines. Currently, manufacturers are pursuing higher pressure ratios, better three-dimensional aerodynamics, and reduced aerodynamic losses to achieve increased cycle efficiency.

Advanced manufacturing may enable higher turbine inlet temperatures, new materials and coatings, improved cooling, and better sealing and three-dimensional aerodynamics to reduce losses—all of which impact efficiency. Using 3-D printing to manufacture airfoils out of several materials, each matched to the level of stress it would experience, could lead to tremendous weight reductions. And new combustor designs could increase operability windows, reduce emissions, and allow fuel flexibility while maintaining flame stability.

Advanced manufacturing can also achieve increased performance and operability through the integration of sensors in turbine components.

Pratt & Whitney's geared turbofan engine gearbox bracket was manufactured using direct metal laser sintering in nickel alloy.

Photo: Pratt & Whitney

Manufacturing a short pipe section with a smooth transition from round to square is simplified by use of 3-D printing.

Photo: Siemens

Through the use of selective laser melting, for example, instrumentation can be designed and integrated into the component prior to printing. Moreover, selective laser melting provides the opportunity to place instrumentation in locations which otherwise might be impossible, given the routing or line-of-sight issues arising from conventional processes.

Printing reliable sensors directly on turbine components, such as the airfoils, can lead to improved monitoring and prognostics capabilities of the component, reducing costs, downtime for repairs, and the complexity of sensor installation.

Moreover, gas turbines are typically operated in a way that is optimal only to an average engine, operating on an average day, with an average fuel composition; having these much more detailed measurements will enable significant improvements in performance.

The entry point where advanced manufacturing techniques make business sense depends upon the application, and it is helpful to differentiate between the validation and prototyping phase, the production phase, and the repair and aftermarket phase.

Start with the validation and prototyping phase: Conventional processes used in turbine development programs require significant design cycle time. That time can be reduced significantly through parallel and integrated development processes that are possible via the application of advanced manufacturing. For instance, a new digital 3-D design can be printed immediately using selective laser melting and then tested. (The authors of this article routinely use additive manufacturing for combustion and turbine cooling experiments.)

At the production phase, the business case for developing the tooling and fixtures needed to manufacture parts is quite different from the one for manufacturing the actual parts themselves. As in the prototyping phase, advanced manufacturing is quickly buying its way into the shop floor for the rapid production of fixtures that minimize facility setup time. In addition, it may speed up the casting processes of complex parts such as turbine blades by replacing the lost wax process with 3-D printed cores.

Even with the production of engine components themselves, industry is moving ahead. In April 2015, General Electric announced the first-ever 3-D printed engine component certified by the U.S. Federal Aviation Administration: A part of the compressor used in the gas turbine that powers Boeing's 777. GE also announced that its GE Aviation division plans to produce more than 100,000 additively manufactured parts by 2020, including the fuel nozzles slated for use in its innovative LEAP engine.

Meanwhile, other gas turbine manufacturers are making use of advanced methods. Rolls-Royce announced in 2015 that it will conduct flight tests on the largest 3-D printed component to ever power an aircraft—a titanium housing that contains 48 airfoils. The component is 1.5 m in diameter and 0.5 m in thickness. And recently, Toulouse-based Safran Microturbo was able to print a complete gas turbine assembly.

Finally, opportunities in the repair and overhaul market are particularly exciting. New technologies are creating better methods for welding, replacing abraded material, and joining two pieces made from different materials, such as ceramic thermal barrier coatings onto combustor liners or turbine blades. In addition, the possibility of repairing components in the field rather than requiring them to be shipped to a central facility offers significant opportunities for minimizing outages or time off wing.

## The Larger Revolution

As with the introduction of any new method, there are challenges in integrating advanced manufacturing into current development programs. For instance, today's workforce is unprepared to take advantage of what advanced manufacturing offers. Academic programs must educate future engineers to integrate design with new manufacturing methods, and we need better technical education to produce the skilled labor qualified to use the new processes.

The certification processes for components also needs attention. Without clear policies, the tremendous opportunities for the aftermarket repair business may result in intellectual property battles where lines can easily be blurred given the digitization of parts. Policies need to address potential issues quickly in order to promote the uses of advanced manufacturing.

Even if all that can be accomplished, the larger revolution is yet to come: The complete rethinking of architectures, layouts, and general design practices.

For example, one gas turbine component that has received significant attention from potential first adopters is the fuel injector/nozzle, which has numerous intricate holes and injection passages. However, the design teams that have worked on it quickly realized that not only can they more easily manufacture those complex components, but a bewildering array of new options are now available. A simple example is the fuel orifice itself—it has always been round because drilled holes are round, but is that the optimal shape?

Similarly, redesigning turbine airfoils presents tremendous opportunities to route valuable cooling air to regions where it was not previously possible to cool in an effective manner. What is the optimal shape and layout of the airfoil cooling channels? Future combustors, turbine components, and other high tech critical components will be increasingly changed as people rethink development of these components outside of the manufacturing restrictions that we have grown up with.

Gas Turbines: Reshoring High-Tech Design and Manufacturing

Gas turbines are high tech, and the original equipment manufacturers employ significant numbers of individuals with advanced degrees as well as workers in a range of skilled craft trades to assemble the gas turbine product. Also, the size and complexity of gas turbines requires a major manufacturing base; building these machines involves access to major test facilities, significant infrastructure, and engagement with a broad supply chain. In an era when the availability of high paying jobs is a national priority, further growth in the manufacture of gas turbines in the United States may present significant opportunities.

The field for power generation systems has been dominated by four manufacturers: General Electric, Siemens, Mitsubishi Heavy Industries, and Alstom (which is in the process of being acquired by General Electric). Those companies employ hundreds of thousands of people across their businesses. And in this decade, each has invested in major manufacturing facilities in the U.S. Southeast:

Siemens, a German conglomerate, put an engineering and manufacturing facility in Charlotte, N.C., in 2011, where they have developed a $130 million manufacturing operation. Siemens also has headquartered a major engineering operation in Orlando since 2002, employing 1,800 workers. Mitsubishi, based in Tokyo, installed a$325 million manufacturing facility near Savannah, Ga., in 2011.

Alstom, a French company, made a big investment in Chattanooga in 2010, completing a $300 million manufacturing facility there. Ge Power & Energy established its headquarters in Atlanta in 1998, and Greenville, S.C., is the home of the world's largest gas turbine manufacturing plant with more than 3,000 employees. In 2015, GE opened Advanced Manufacturing Works as a part of its complex in Greenville. Similarly, there is a large repair and overhaul market, supplied by OEMs, third parties, and equipment operators. For example, Delta Tech Ops, a division of Delta Air Lines, operates a$600 million per year repair and overhaul facility located adjacent to Atlanta's Hartsfield-Jackson Airport. Delta is a major developer of advanced repairs and is pursuing a variety of additive manufacturing approaches for the repair and overhaul market.

The gas turbine is poised to become the most important thermal energy and propulsion device in the 21st century. Advanced manufacture will significantly alter how gas turbines are made and perhaps how they operate.

View article in PDF format.

## Errata

Some tools below are only available to our subscribers or users with an online account.

### Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related Proceedings Articles
Related eBook Content
Topic Collections